Works fine with my HD and swedish WM 6.1.

Thanks a lot! /M

Hi
Latest version working well on Touch Hd.
r
Andrew

New power-saving feature!

With auto-set ON the GPS/SDcard/WiFi devices is now kept on so you can now turn off the screen through the power-button, or letting it time out! This takes the TFT screen out of the power-draining equation, and hopefully cut some of the heat generated.

No AppToDate support yet because I don't have a site to host my app.

The power savings doesn't work. I checked autoset and run navizon. But after I power the phone back on the gps light on navizon is gray. What might be the problem?

Ok so I was wrong it does seem to work. But only after Navizon runs for about 1 minute or so. If push power soon after starting the program then wait 10 sec and push power again then the gps light is gray. If I wait a couple minutes then push the power button the green light stays on for gps and coming out of standby. Do I need to wait a minute before I try for some reason?

I think you do need to wait for Navizon to "power-up" such as acquiring its own GPS-lock and other set up.

I wait until the GPS light in Navizon starts blinking, then I power off. I haven't had a issue doing it this way yet. CaBuddy doesn't directly change the way Navizon works, but powering off before it's ready might affect something.

I did wait till navizon gps light had come on. So I don't know what is going on. It isn't a big deal since it works after a minute.

I'll double-check this with my Kaiser when I get a chance since power-saving is a fiddly land. Thanks.

So pushing the power button standbys my phone and the gps stays on with navizon. But if I let the phone go standby on it own(I have it set to turn off after 1 min) then when I push the power button to turn it back on the gps light is off. Should I not be able to let the phone go to standby on its own? I wouldn't think that the phone timing out and me pushing the button would change much. Thanks for all your help Nustrike.

Is this related to the HTC titan maybe having problems? Let me know if you need any more information on the phone?

Ever since I installed a new rom for my P3300 I cannot use camerawarebuddy to start navizon.

CAbuddy used to have 2 locations for navizon, one in the main memory and one on the storage card.

Now my phone has 'gained' some locations like 'network' and 'bluetooth'. The result is that CAbuddy only offers to start navizon from main memory or network. (see screenshot)

 Capture.jpg ( 17.41K ) Number of downloads: 6


Is there any way to start navizon without installing it on the main memory?

Sorry for the delay, I've been off working on other things.

Wow, didn't realize that this could happen. I only ask the system APIs for the storage volume. I'll look into it.

It actually works quite well on this new Acer m900 (no more HTC/Qualcomm crap!) where storage is named SDMMC. I should fix it so WVGA doesn't have so much whitespace ...