Available for a limited time only - £10 off a £20 spend at eXpansys! For more details visit this topic!

Please Log In or Register - it's FREE!

 
Reply to this topicStart new topic
 A Stopwatch for WM 2003 (well 8 in 1), A Stopwatch util - free if you want it!
Rating 5 V
stevie_mac
post Aug 25 2005, 13:18
Post #1


Newbie
Group Icon

Group: Posters
Posts: 43
Joined: 9th December 2003
From: England - North East
Member No.: 23,898

Device(s): Vodafone v1640, Orange E650



Updated


Hi, thought it was about time I gave something back to the community!





Some time ago, I needed a stopwatch & realised the "Smartphone" didn't have one (or at least I couldn't find one anyhoo!) so I created one. Its intended use was to time several items at once (e.g. a race). I don't like standard Start / Lap /Stop timers so I laid it out as 8 individual timers. Each one can be started / stopped individually & they are Count up / Count down configurable. It is quite basic & does what I initially intended it to do (minus some features I'd planned like saving the setup, beautifying etc).See updates below


Normally I'd have done this in C++ (so It could be used on WM2002 & WM2003) but I was in a hurry & so did it in C# - my apologies to the WM2002 users! Unfortunately, still true!


I have attached the executable (it should work without installation) and a CAB if you need / prefer to use that.


NOTES:
This application is...
1. Fully functional Plus some more
2. Free Still free
4. Not guaranteed in any manner or fashion (insert std disclaimer here) Still True

This application is not...
1. Beautified No longer true, now its quite tidy!
2. Purported to be atomic clock accurate
3. Finished (as in some features I'd hoped to add are not done - I might finish it one day!) Almost true
4. Thoroughly bug / operation / spell checked

HOW IT WORKS:
1. Start the application
2. Select the timer to using the joystick / rocker. push the action button to Start / Stop the timer. Alternatively, press 1 to Start / Stop timer 1, press 2 to Start / Stop timer 2 etc etc (there are 8 timers)
3. Press * to Start / Stop all timers
4. Press # to reset all timers.
5. Press 0 to reset the selected timer
6. Press 9 to configure the selected timer.
7. Press Call to cycle through the timers (action key on WM2005)

MORE..
> Count completion audible alert / vibration alert
> HTML Report output
> Save & load up to 5 timer 'Sets'


Regards - Steve Mac.




Update:

See discussion thread...
http://www.modaco.com/8-in-1-Stopwatch-t227276.html



Get latest version...
http://www.modaco.com/index.php?act=dscrip...tails&f_id=1153


This post has been edited by stevie_mac: May 30 2006, 13:44
Go to the top of the page
 
+Quote Post
gpcarreon (MVP)
post Aug 26 2005, 01:03
Post #2


RN, MS MVP-MD
Group Icon

Group: Moderator Team
Posts: 4,532
Joined: 7th August 2003
From: Legazpi, Philippines
Member No.: 12,251

Device(s): ASUS P525, ASUS N10J-A1



Thank you Stevie_mac! biggrin.gif


--------------------
Jakult everyday, everyday OK!
Go to the top of the page
 
+Quote Post
awarner (MVP)
post Aug 26 2005, 01:59
Post #3


Staff Team Leader
Group Icon

Group: Admin Team
Posts: 17,178
Joined: 24th November 2002
From: Southampton
Member No.: 53

Device(s): C550 and JasJar



Nice one smile.gif

Can you please add it to the Downloads section?


--------------------
3 mobile where the words "customer" and "service" only exists in the dictionary

Smartphone and PocketPC History
SPV, E100, E200, C500, C550, C600 (MoDaCo Edition), MPX200, MPX220, MIO8380, Voq Pro, Lobster 700, JasJar, Vario

New and updated Smartphone History

Life's too fast can I get off and walk for a bit?
I used to be top poster.......
Go to the top of the page
 
+Quote Post
monkeyjabber
post Dec 23 2005, 02:57
Post #4


Newbie
Group Icon

Group: Posters
Posts: 26
Joined: 19th July 2004
Member No.: 49,824



If you need a stopwatch, you can also try RJV Clock. It has a nice interface, and its free.

It can be found here:
http://www.modaco.com/content-page/...jv clock/pagination/page/0/


Attached File  RJV_Clock.gif ( 28.03K ) Number of downloads: 54
Go to the top of the page
 
+Quote Post
stevie_mac
post May 16 2006, 20:24
Post #5


Newbie
Group Icon

Group: Posters
Posts: 43
Joined: 9th December 2003
From: England - North East
Member No.: 23,898

Device(s): Vodafone v1640, Orange E650





Get latest version...
http://www.modaco.com/index.php?act=dscrip...tails&f_id=1153


This post has been edited by stevie_mac: May 30 2006, 13:45
Go to the top of the page
 
+Quote Post
chris84
post Jun 1 2006, 08:34
Post #6


Newbie
Group Icon

Group: Members
Posts: 1
Joined: 1st June 2006
Member No.: 192,623

Device(s): i930



thak you stevie
Go to the top of the page
 
+Quote Post
limox9
post Jul 4 2006, 10:28
Post #7


Newbie
Group Icon

Group: Members
Posts: 1
Joined: 4th July 2006
Member No.: 197,069

Device(s): IPAQ



Hi, Stevie! That CAB does NOT install on IPAQ 6510 (WM2003) .. i dunno why. He said: it's not Windows CE (!?) CAB. What i do wrong?

P.S. Thanx for that stuff - it's best stopwatch i've used before. I have previous version on my T-Mobile, works perfect!


This post has been edited by limox9: Jul 4 2006, 10:32
Go to the top of the page
 
+Quote Post
stevie_mac
post Jul 5 2006, 09:32
Post #8


Newbie
Group Icon

Group: Posters
Posts: 43
Joined: 9th December 2003
From: England - North East
Member No.: 23,898

Device(s): Vodafone v1640, Orange E650



QUOTE(limox9 @ Jul 4 2006, 11:28) *
Hi, Stevie! That CAB does NOT install on IPAQ 6510 (WM2003) .. i dunno why. He said: it's not Windows CE (!?) CAB. What i do wrong?

P.S. Thanx for that stuff - it's best stopwatch i've used before. I have previous version on my T-Mobile, works perfect!


Hi limox9, the cab was made for smartphone & that is why it wont install.

The reason is that although the program will work on a PDA running WM2003, there are issues.
  • No touch screen support (on main screen & custom time entry control)
  • Screen is not recalculated properly when rotated (is ok if you start in portrait / landscape - but is odd when you change) or when keyboard is displayed
  • Backgrounds for different size screens are currenly static (not auto generated) and I have not yet created all combinations of resolutions (actually, I need to generate background rather than have static images as there are more and more different resolutions cropping up.
I may get around to these at some point (and add some features suggested in another thread) but time is tight at the moment.


That said, If you wanna run it on your IPAQ 6510, copy the files installed on your smartphone to a folder on your IPAQ 6510. It will work, but with the limitations I explained above.


Regards, Steve.
Go to the top of the page
 
+Quote Post
koolkingkai
post Jun 1 2007, 09:10
Post #9


Newbie
Group Icon

Group: Posters
Posts: 1
Joined: 1st May 2007
Member No.: 251,935

Device(s): spv m3100



super super awesome, thanks a bunch. i was looking for a countdown timer and watch8 is so much more then i was looking for

thanks again
Go to the top of the page
 
+Quote Post
xiejun3970
post Jun 1 2007, 13:54
Post #10


Newbie
Group Icon

Group: Posters
Posts: 8
Joined: 7th May 2007
Member No.: 253,739



ok ,better than that old one i used ,thank you
Go to the top of the page
 
+Quote Post
TopDog
post Jul 8 2007, 17:10
Post #11


Newbie
Group Icon

Group: Posters
Posts: 4
Joined: 8th October 2003
From: Oslo
Member No.: 17,858



This is just what I was looking for, and then some!

I can confirm it works fine on WM6 (HTC Vox) as long as you keep it in portrait mode wink.gif


--------------------
My Gear: Samsung SGH-i780 + Jabra BT3030
Go to the top of the page
 
+Quote Post
darcon
post Jul 21 2007, 17:47
Post #12


Newbie
Group Icon

Group: Posters
Posts: 1
Joined: 14th March 2007
Member No.: 238,019

Device(s): Dash



Works great on my Tmobile Dash with WM6

Thank you!!! biggrin.gif
Go to the top of the page
 
+Quote Post
stevie_mac
post Sep 16 2007, 22:34
Post #13


Newbie
Group Icon

Group: Posters
Posts: 43
Joined: 9th December 2003
From: England - North East
Member No.: 23,898

Device(s): Vodafone v1640, Orange E650



Updated - mainly to support rotation and square screens.

http://www.modaco.com/downloads-file1153.html

Steve.
Go to the top of the page
 
+Quote Post
Nacron
post Sep 30 2007, 14:35
Post #14


Newbie
Group Icon

Group: Posters
Posts: 1
Joined: 14th March 2007
Member No.: 238,074



This app tells me that I don't have the right version of .net framework. I'm running WM2003SE on a MPX220
Go to the top of the page
 
+Quote Post
Wombleuk
post Oct 22 2007, 19:35
Post #15


Enthusiast
Group Icon

Group: Posters
Posts: 202
Joined: 6th June 2005
Member No.: 133,302

Device(s): V1415



Don't want to be picky with a 'free' app, but how often is it going to ask me for a donation?
Go to the top of the page
 
+Quote Post
stevie_mac
post Oct 26 2007, 15:36
Post #16


Newbie
Group Icon

Group: Posters
Posts: 43
Joined: 9th December 2003
From: England - North East
Member No.: 23,898

Device(s): Vodafone v1640, Orange E650



QUOTE(Wombleuk @ Oct 22 2007, 20:35) *
Don't want to be picky with a 'free' app, but how often is it going to ask me for a donation?

Cheeky ;-)

Oh dear, I guess there is a problem! It should only show once - after 5 uses from install. Tell me, do your settings save OK? Can you add a timer set & does it persist after closing & reopening the application? Can you browse to the installation folder & tel me what value is assigned to "app.rc" in the file "config.ini"? it should be increment with each usage. If it is stuck at 5 then change it to 6!

Steve.


QUOTE(limox9)
Hi, Stevie! That CAB does NOT install on IPAQ 6510 (WM2003) .. i dunno why. He said: it's not Windows CE (!?) CAB. What i do wrong?

P.S. Thanx for that stuff - it's best stopwatch i've used before. I have previous version on my T-Mobile, works perfect!


It would seem with some new features i added - I have started using .NET2 framework which it appears does not install on 2003 (i think it was something to do with touch adding screen support & rotation.

My apologies, If I get time, I will try to remove these dependencies without removing any functionality. for now though, it would seen to be a no go!

Steve.


PS, sorry for the delay in responding.
Go to the top of the page
 
+Quote Post
Wombleuk
post Oct 26 2007, 17:24
Post #17


Enthusiast
Group Icon

Group: Posters
Posts: 202
Joined: 6th June 2005
Member No.: 133,302

Device(s): V1415



Steve,
it's only asked me once so far, but I didn't know if it was going to continue.
It's not something I'll be using much anyway, just a nice-to-have.
thanks,
Graham
Go to the top of the page
 
+Quote Post
My_Immortal
post Feb 20 2008, 10:31
Post #18


Regular
Group Icon

Group: Posters
Posts: 72
Joined: 22nd November 2005
Member No.: 159,618

Device(s): Qtek 8500



I am quite impressed because it works perfectly on my landscape screen WM6 smartphone!
Thank you very much, it is exactly what I needed!! smile.gif


--------------------
The world forgetting by the world forgot.
Eternal sunshine of the spotless mind!


Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic

Collapse

Similar Topics

  Topic Replies Topic Starter Views Last Action
No new Topic has attachmentsSega GG + Nintendo GameBoy emulator for SP beta test
933 bitbank 128,776 Today, 21:37
Last post by: bitbank
No new I900 3G in the US
28 pidsw 1,637 Today, 21:08
Last post by: Turb0wned
No new English Update for german Omnia?
18 mazeli 1,136 Today, 20:22
Last post by: seccus
No new Topic has attachmentsComplete install guide for Manila (TouchFlo 2D) on i900
HTC Standard Skin - All files incl
296 robf80 54,163 Today, 19:05
Last post by: camalot
No new Topic has attachmentsHTC Album - Fixed Screen Resolution for i900
44 kaer 5,543 Today, 18:54
Last post by: Mrhoffmann
No New Posts Here is a download location for Omnia CDMA driver
This one will work with XP for ROM Upgrades
2 miles_muso 543 Today, 18:16
Last post by: miles_muso

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members: