aqwarel

spv e200 power connector

Recommended Posts

aqwarel    0

hi boys, i need help...

i damaged my power connector/ it is broken/ when i put phone to USB Cradle. i need some new power connector or some recovery tutorial...

i find on the net scheme ... its very difficulty create new connector because place pins between cca 1/2 mm ...

Share this post


Link to post
Share on other sites
Will    0

is it the phone side or the charger side that is damaged? - i have some spare plugs to connect to the phone, but not sockets (inside the phone)

Will

Share this post


Link to post
Share on other sites
Pycon    0

In the package of my E200 there're the cradle to connect the phone ( and charging it ) and the power charger too... :??: Don't u?

Share this post


Link to post
Share on other sites
aqwarel    0
is it the phone side or the charger side that is damaged? - i have some spare plugs to connect to the phone, but not sockets (inside the phone)

Will

<{POST_SNAPBACK}>

a need conector inside the phone

Share this post


Link to post
Share on other sites
Pycon    0
Done it a few times actually  8)

Richard

<{POST_SNAPBACK}>

Sure? :) How? Only opening the phone is difficult... :cry:

Share this post


Link to post
Share on other sites
fluffcat1    0
Sure?  :) How? Only opening the phone is difficult...  :cry:

get yourself a 'case opening tool' and it's easy to open the phone! It's a small, flat edged piece of plastic, but you could use a gutar plectrum. There are many methods on modaco for opening the phone, but soldering the connector is harder, if you are not good with a solderng iron get someone else to do it for you.

Richard

Share this post


Link to post
Share on other sites
Pycon    0
get yourself a 'case opening tool' and it's easy to open the phone! It's a small, flat edged piece of plastic, but you could use a gutar plectrum. There are many methods on modaco for opening the phone, but soldering the connector is harder, if you are not good with a solderng iron get someone else to do it for you.

Richard

<{POST_SNAPBACK}>

Oh man, I've found only one method to open the cell... What else methods do u know? :oops: Could u wirte me the links? Thx in advance... :)

Share this post


Link to post
Share on other sites
fluffcat1    0
Oh man, I've found only one method to open the cell... What else methods do u know?  :oops: Could u wirte me the links? Thx in advance...  :)

There are no screws holding the case on - use your 'case opening tool' ( NOT a knife!) and slide it between the chassis and the face at an upward angle, the face will pop free of the retaining lugs.

Richard

Share this post


Link to post
Share on other sites
nisa    0

Hi

I have a problem in Iran. My E200 's power cable has been lost and I can't find it here. Can I make it by myself. what kind of cable and connectors should I buy here. I need this just for power supply.

thank u in advance

nima

Share this post


Link to post
Share on other sites
Pycon    0
There are no screws holding the case on - use your 'case opening tool' ( NOT a knife!) and slide it between the chassis and the face at an upward angle, the face will pop free of the retaining lugs.

Richard

<{POST_SNAPBACK}>

Sure? :oops: Many thanks! 8)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


MoDaCo is part of the MoDaCo.network, © Paul O'Brien 2002-2016. MoDaCo uses IntelliTxt technology.