PaulOBrien

Paul's guide to... changing the HTC Touch / T-Mobile Wing PagePool size

296 posts in this topic

I'm not sure, but I think you are still having problems.

Could you put a question mark (?) after questions, so we can tell what you want answers to.

If you are getting "unregconised internal or external command" then Windows can't find pdocread.exe

I created a folder called Touch (on my machine it is D:\Touch) and put Itsme's ZIP file in it, so now I have D:\Touch\itsutilsbin-20070323.zip

Then I extracted that ZIP file to D:\Touch\Pagepool

Then I ran D:\Touch\Pagepool\pdocread.exe -l

It sounds like you just need open a command prompt, then to go to the folder that holds pdocread.exe (CD D:\Touch\Pagepool in my case, yours may be different) before you run pdocread

thx a lot chucky with ur guide i reach step 5

but i when i type "pdocwrite part02.8mb.dump" is show

ERROR: Unable to open file part02.8mb.dump -the system cannot findthe file specified

copyfiletotffs

0

Share this post


Link to post
Share on other sites

PAUL !! HELP PlzZz...

ANY ppl ADmin and those in HTC ToucH PLEASE SHARE !!! pLeASE!!!

:D

0

Share this post


Link to post
Share on other sites

Thank you Paul for saving me a whole lot of frustration...I just followed your directions and they worked excellently. I was curious though, i changed the page pool size to 4mb on my wing. What gives a higher amount of MB for the program usage, changing it to 4mb or 6mb??

0

Share this post


Link to post
Share on other sites

Please, only use this if youare experienced with this kind of thing my phone is now bricked to the fullest degree... dosent even charge....

0

Share this post


Link to post
Share on other sites

WHAT KIND OF BRICK IS THIS THE SCREEN WONT EVEN COME ON AND ITWONT RESPOND TO ANY CHARGE FROM COMPUTER OR WALL!!!!:D :( :( iam devastated

0

Share this post


Link to post
Share on other sites

Hey Paul,

Thank you very much for the simple instructions. My question is if i "clear storage" after succesfully changing the pagepool settings to 6mb, will the settings still be in-place??? Or will i have to re-do the entire "itsuils" preperation and all that again. Thanky you once again for the instructions and the use of your site.

0

Share this post


Link to post
Share on other sites

I thought I was going to faint when I saw my phone start back up after the soft set.  All I have to say is, I love you Paul.  

0

Share this post


Link to post
Share on other sites

hey i have a problem here, when i open the pdocread -l prompt thingy , it goes on and watever but like in a few second it disappears for no reason then i open it again and it disappears over and over. like i don't know. what do i do here?

thanks buddies

0

Share this post


Link to post
Share on other sites

Okay i'm in step 3 where CopyTFFSToFile(0x0, 0x40d2000, Part02.dump appears, and it doesn't do anything it stays there for hours

wat do i do?

0

Share this post


Link to post
Share on other sites

Unfortunately it looks like i've bicked my phone :D

I obviously was trying this too early on a sunday morning!

After pressing the soft reset the device will not turn on or respond to the USB connection (no orange charge LED).

I'm at a bit of a loss and not sure if this is recoverable before last resort of sending to get it fixed. I have searched around Modaco and XDA and haven't seen anything specific.

Any thoughts?

JT

EDIT: Just realised how to hard reset my phone...at least it powers on but just to the Orange boot screen.

Edited by templeman01
0

Share this post


Link to post
Share on other sites

Have you tried flashing a new ROM? I wou;d have thought that would fix it.

0

Share this post


Link to post
Share on other sites
Have you tried flashing a new ROM? I wou;d have thought that would fix it.

I had previously flashed to the Blue_Elves_v5_WM6.1 ROM.....I just tried to flash to this ROM again but as Activesync won't connect to the device not sure how to do it?? THe boatloader shows the USB connection.

Thanks for your time Confucious

0

Share this post


Link to post
Share on other sites

Activesync does not need to connect to flash. So long as you have the bootloader it should work.

I am no expert on flashing (I've done it lots of times but really don't know - I rely on the guys at xda-devs if anything goes wrong). Trying to flash again won't do any harm but if it doesn't work the xda-devs is where all the experts on flashing are. I'm sure they will be able to help.

Good luck!

0

Share this post


Link to post
Share on other sites
Activesync does not need to connect to flash. So long as you have the bootloader it should work.

I am no expert on flashing (I've done it lots of times but really don't know - I rely on the guys at xda-devs if anything goes wrong). Trying to flash again won't do any harm but if it doesn't work the xda-devs is where all the experts on flashing are. I'm sure they will be able to help.

Good luck!

I think i need to flash an original ROM so downloading the Blue Touch ROM which will hopefully work!

0

Share this post


Link to post
Share on other sites
I think i need to flash an original ROM so downloading the Blue Touch ROM which will hopefully work!

Why? I don't think I'd ever flash an original ROM when there are so many better ones out there. Which ROM you flash shouldn't make a difference to your problem.

0

Share this post


Link to post
Share on other sites

hey paul im stuck on step 3...on the pagepool changing i dont know how to open a command prompt in the pagepool folder/directory i make therefore i cant get passed that step if you could please help me i would appreciated thank you

0

Share this post


Link to post
Share on other sites
Why? I don't think I'd ever flash an original ROM when there are so many better ones out there. Which ROM you flash shouldn't make a difference to your problem.

The original ROM worked :D very relieved as though I had lost my Touch.

Thanks for all your help.

0

Share this post


Link to post
Share on other sites
- Ensure device is connected to PC and Activesync'd / WMDC'd

- Open a command prompt at your new directory

- Type 'pdocread -l' (minus the quotes of course)

how do i do the second step..? I dint understand what you meant by open a command prompt at your new directory?...

0

Share this post


Link to post
Share on other sites

Flashed my Wing, right?

Went from 2.2MB (with just WM6 running) to 15.4 after startup.

I rebooted once, now it's at 11.3 after startup.

Whats the deal?

0

Share this post


Link to post
Share on other sites

Thank you for this, I went from 10MB available to 18MB available by decreasing page pool to 6MB from the t-mobile wing default.

0

Share this post


Link to post
Share on other sites
Sofar I have ran the ROM unlocker and downloaded the pdocread file. When I run "pdocread -l" I get the following for my part 2

"50.63M <0x32a0000> Part02"

When I type "pdocread 0 0x32a0000 part02.dump" I get this response

copy TFFSToFile(0x0, 0x32a0000, part02.dump)

ERROR: ITReadDisk : Read 00000000 bytes - A device attached to the system is not functioning

And I don't get a part02.dump file. Any ideas? thanks!

Kinoons

Hello, I got an HTC S730 which gave a different file size but the same problem

Regards

0

Share this post


Link to post
Share on other sites

worked great went from 5mb to 17

thanks man :D

-steve_x

0

Share this post


Link to post
Share on other sites

Worked for so far. No problems... Thanks. TMobile had no clue when I told them I had a memory problem..

Now I don't have to return my device.

0

Share this post


Link to post
Share on other sites

damn. Double post.

Edited by zeflash
0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

MoDaCo is part of the MoDaCo.network, © Paul O'Brien 2002-2016. MoDaCo uses IntelliTxt technology.