lubo777

HOWTO use VoIP already build in all WM 6.x based phones

5 posts in this topic

I'll post here a simple WM 6.5 VoIP Activation HOWTO with a few screen shots explaining how the WM6VoIPFull.cab configuration software is working and I hope that it may be included in the new custom ROM versions provided in this forum B)

I hope also this HOWTO will be usefull for all enthusiast from this forum.

I'm using a VoIP services provided from a local (Bulgarian) VoIP provider. They are offering local fixed phone numbers and good International and local rates.

When I'm connected trough WiFi (also is working trough 3G ....) to the Internet and my VoIP is registered I can receive incomming phone calls to my fixed number and send outgoing calls using the G$M network or Internet (VoIP).

All outgoing / incomming calls are made using the standart build in phone dialer and adress book - this is because the VoIP support is build in your WM 6.x based phone by default.

If you like you can activate / deactivate the VoIP temporarily for some outgoing calls and etc.

For example when I'm abroad and there are available WiFi Hotspot I'm using VoIP for all outgoing calls and I don't have to pay the expensive roaming charges ...

You don't need some third party voip software (like fring, skype and etc) to make voip calls at better prices than the prices offered from the G$M providers. :(

The SIP VoIP build in WM 6.x supports only GSM (13.2 kbps) / g711alaw (64 kbps) / g711-ulaw (64 kbps) codecs

Thanks for this software to the autors: shaun33, Jaap de Wolf and tucahara .... and all enthusiasts from forum.xda-developers.com :(

voip_programs.png

1. WM6VoIPFull.cab instalation add two VoIP config programs + today screen plugin + the GSM VoIP cidec

voip_sip_config.png

2. Sip Config Tool: here you can add your VoIP service provider alias, SIP server address + port, user name and password

voip_sip_config_3G.png

2.1. Using the Tools menu you can acctivate VoIP over 3G / GPRS via a registry update

voip_sip_dialplan.png

3. Dial Plan creator - here you can update the dial plan

voip_today_settings.pngvoip_today.png

4. Using the today plugin you very easy can acctivate / deactivate the VoIP service

voip_today_internet_calling_config.png

5. Using the Today plugin you can change the VoIP settings

voip_today_registered.png

6. After a wifi or 3G connection the VoIP service will be automatically acctivated

voip_call_3G.png

7. After the VoIP registration and activation, when you dial number it will be send automatically trough your VoIP Provider using the standart build in phone dialer and adress book

The Full VoIP support is already added in the new WM 6.5 version 21189 based ROM for Samsung Omnia provided from:

Khuanchai here :(

and sector here :(

Thank you!!! :D

Edited by lubo777
0

Share this post


Link to post
Share on other sites

TIP: If you are Online using WiFi ot 3G / GPRS and the VoIP don't register itself try this: using the Internet calling settings switch VoIP off with "Never" option, and after that swith it back On with the "Whenever available" option - it will try to register with your SIP VoIP provider again.

If the account settings are OK and your provider supports your VoIP codecs it will register OK.

voip_today_internet_calling_config.png

Edited by lubo777
0

Share this post


Link to post
Share on other sites
TIP: If you are Online using WiFi ot 3G / GPRS and the VoIP don't register itself try this: using the Internet calling settings switch VoIP off with "Never" option, and after that swith it back On with the "Whenever available" option - it will try to register with your SIP VoIP provider again.

If the account settings are OK and your provider supports your VoIP codecs it will register OK.

voip_today_internet_calling_config.png

Hello lubo777 followed your very clear instructions and all installed fine. Setup as you suggested and attempted to make a call using my SIP provider with the SIP selected. The result was a message saying that either my SIP service was unavailable or the phone number was incorrect. Well the number is ok and I do have service as shown both on the phone and my credits with this provider. My connection was through wireless to my Wireless SMC Broadband VoIP Router. I wonder if I need to disable the VoIP service in my router? Appreciate your thoughts.

0

Share this post


Link to post
Share on other sites
Hello lubo777 followed your very clear instructions and all installed fine. Setup as you suggested and attempted to make a call using my SIP provider with the SIP selected. The result was a message saying that either my SIP service was unavailable or the phone number was incorrect. Well the number is ok and I do have service as shown both on the phone and my credits with this provider. My connection was through wireless to my Wireless SMC Broadband VoIP Router. I wonder if I need to disable the VoIP service in my router? Appreciate your thoughts.

Hi, just setup voip and it works perfectly well with router on WI Fi but 3g(hsdpa) i have to start with some other program and then it said registered but when dial the number it just hangs up it does not even start to ring.As i said it rings on WIFi.

Can you help please?Thanks

0

Share this post


Link to post
Share on other sites

And can anybody tell me why my Samsung i900 breaks the connection when I am using 3G? Through Wi-Fi with SIP config tool everything works fine but when it comes to 3G all I can do is register in the SIP network and start dialing - then it disconnects.

Thanks in advance.

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

MoDaCo is part of the MoDaCo.network, © Paul O'Brien 2002-2016. MoDaCo uses IntelliTxt technology.