Jump to content

! Help! How to hard reset Omnia II i8000 :(


Guest 1ns4nity

Recommended Posts

Guest Zwiebel

Hi!

The Hard Reset button on the back of the phone, under the Battery cover, under the Micro SD card slot.

All things of the phone in its user manual etc. on the internet .

I hope I can help for you ;)

Edited by Zwiebel
Link to comment
Share on other sites

  • 1 month later...
Guest klvjoe

Sorry , but this is soft Reset NOT Hard Reset , if the software can't load , soft reset will not help.

HAVE ANY IDEA HOW TO HARD RESET THE DEVICE ????

Hi!

The Hard Reset button on the back of the phone, under the Battery cover, under the Micro SD card slot.

All things of the phone in its user manual etc. on the internet .

I hope I can help for you :D

Link to comment
Share on other sites

Guest Devilforce
Sorry , but this is soft Reset NOT Hard Reset , if the software can't load , soft reset will not help.

HAVE ANY IDEA HOW TO HARD RESET THE DEVICE ????

Hi.....

I Found a very easy way to full hard reset Omnia II

just dial this in phone.

Master-Reset: *2767*3855#

Hope its work...

Link to comment
Share on other sites

  • 2 weeks later...
Guest geennaam
Sorry , but this is soft Reset NOT Hard Reset , if the software can't load , soft reset will not help.

HAVE ANY IDEA HOW TO HARD RESET THE DEVICE ????

1)Turn your I8000 off.

2)Keep the following buttons pressed: the top right button (screenlock) + top left button (volume up) + bottom left button ( dial)

3) Turn on your I9000 (bottom right button) while keeping the buttons in 2) pressed.

This will result in a hard reset and restore the WM registry. It will not clear "my storage".

Link to comment
Share on other sites

  • 1 month later...

I have tried this combination but it doesn't work. My Omnia just start up till the Samsung screen and then it goes to black screen. Please, help me!!!! I just bought it yesterday and a program left it that way!!!!!!!!11 :) :D :D

1)Turn your I8000 off.

2)Keep the following buttons pressed: the top right button (screenlock) + top left button (volume up) + bottom left button ( dial)

3) Turn on your I9000 (bottom right button) while keeping the buttons in 2) pressed.

This will result in a hard reset and restore the WM registry. It will not clear "my storage".

Link to comment
Share on other sites

  • 1 month later...
Guest sonyxperiax2

All the code write above are wrong with B7610. The correct procedure to hard reset the b7610 is to hold all this button: w/l (the one in the left undere volume buttons), the lock button (the one above camera button) and both call butto and close power on button in the front of the phone. Then press again call button to confirm in the new window.

Link to comment
Share on other sites

  • 2 weeks later...
Guest bobgaby

hi all

ok what i did is the following to rest my device to the original condition, basically i went to the main menu setting and i pressed the memory setting it came to a list i pressed clear memory and it gave me the following warning all settings and data stored in your device will be removed enter 1234 and press done to confirm

and that how i did it :) :)

Link to comment
Share on other sites

Guest mad_a_22
Hi.....

I Found a very easy way to full hard reset Omnia II

just dial this in phone.

Master-Reset: *2767*3855#

Hope its work...

i have tried this one.

this is much better when reseting your omnia 2

Link to comment
Share on other sites

  • 5 weeks later...

Omnia II Hard Reset

1. Turn OFF the phone;

2. Press VolumeUp and Lock buttons (do not release);

3. Press Call/Green and then HangUp/Red (do not release all buttons);

4. Phone should Vibrate and turn on;

5. Count to 3 and release all buttons;

You will have a choice to FORMAT or CANCEL the operation.

Edited by c3p9
Link to comment
Share on other sites

  • 1 month later...
Guest SALMONEITOR
Omnia II Hard Reset

1. Turn OFF the phone;

2. Press VolumeUp and Lock buttons (do not release);

3. Press Call/Green and then HangUp/Red (do not release all buttons);

4. Phone should Vibrate and turn on;

5. Count to 3 and release all buttons;

You will have a choice to FORMAT or CANCEL the operation.

gracias makinaaaa

Link to comment
Share on other sites

  • 2 months later...
Guest damn_spiders

OMFG, THANK YOU!!!!

Omnia II Hard Reset

1. Turn OFF the phone;

2. Press VolumeUp and Lock buttons (do not release);

3. Press Call/Green and then HangUp/Red (do not release all buttons);

4. Phone should Vibrate and turn on;

5. Count to 3 and release all buttons;

You will have a choice to FORMAT or CANCEL the operation.

Link to comment
Share on other sites

Guest wprotheus
Omnia II Hard Reset

1. Turn OFF the phone;

2. Press VolumeUp and Lock buttons (do not release);

3. Press Call/Green and then HangUp/Red (do not release all buttons);

4. Phone should Vibrate and turn on;

5. Count to 3 and release all buttons;

You will have a choice to FORMAT or CANCEL the operation.

Thank you very much....

Link to comment
Share on other sites

  • 2 weeks later...
Guest naturalpsychic
Omnia II Hard Reset

1. Turn OFF the phone;

2. Press VolumeUp and Lock buttons (do not release);

3. Press Call/Green and then HangUp/Red (do not release all buttons);

4. Phone should Vibrate and turn on;

5. Count to 3 and release all buttons;

You will have a choice to FORMAT or CANCEL the operation.

CHEERS

Link to comment
Share on other sites

  • 3 weeks later...
Guest cs_0012001
CHEERS

1. Turn OFF the phone;

2. Press VolumeUp and Lock buttons (do not release);

3. Press Call/Green and then HangUp/Red (do not release all buttons);

4. Phone should Vibrate and turn on;

5. Count to 3 and release all buttons;

You will have a choice to FORMAT or CANCEL the operation.

Thank you very much :(

Link to comment
Share on other sites

  • 7 months later...
Guest nazzaim
Omnia II Hard Reset

1. Turn OFF the phone;

2. Press VolumeUp and Lock buttons (do not release);

3. Press Call/Green and then HangUp/Red (do not release all buttons);

4. Phone should Vibrate and turn on;

5. Count to 3 and release all buttons;

You will have a choice to FORMAT or CANCEL the operation.

Thanks a lot man!!

Link to comment
Share on other sites

Guest Namar
1)Turn your I8000 off.

2)Keep the following buttons pressed: the top right button (screenlock) + top left button (volume up) + bottom left button ( dial)

3) Turn on your I9000 (bottom right button) while keeping the buttons in 2) pressed.

This will result in a hard reset and restore the WM registry. It will not clear "my storage".

I know your post is old but going through most of the posts in Omnia II community I at times get confused about which phone is Omnia II. My longheld belief if that Omnia II refers to GT-I8000. I have seen several posts refering to i9000 as Omnia II as you have done above. Can anyone educate me?

Link to comment
Share on other sites

Guest sontot
I know your post is old but going through most of the posts in Omnia II community I at times get confused about which phone is Omnia II. My longheld belief if that Omnia II refers to GT-I8000. I have seen several posts refering to i9000 as Omnia II as you have done above. Can anyone educate me?

Omnia I is I900

Omnia II is I8000

Link to comment
Share on other sites

Guest Darryl of FH
Omnia I is I900

Omnia II is I8000

And then there is the Verizon Omnia II i920.

I believe the I8000 has both front and back cameras, while the i920 only has a back camera.

Link to comment
Share on other sites

Guest sontot
And then there is the Verizon Omnia II i920.

I believe the I8000 has both front and back cameras, while the i920 only has a back camera.

Yup.. :(

Link to comment
Share on other sites

Guest Namar
hi all

ok what i did is the following to rest my device to the original condition, basically i went to the main menu setting and i pressed the memory setting it came to a list i pressed clear memory and it gave me the following warning all settings and data stored in your device will be removed enter 1234 and press done to confirm

and that how i did it :( :(

This is very true of course (I commonly use this method after flashing a new ROM) but I doubt if you can use this simple method when your os does not load as decribed by the member who has this problem and started this thread.

Link to comment
Share on other sites

Guest Justynz

i had tried this, but nothing happen T_T...

I cant reset it sigh... stupid china software >.<

i cant type words as the stupid china software restricted the input settings T_T

Link to comment
Share on other sites

  • 1 month later...
Guest TwistedRat

I have a Omnia 2 that's stuck on language setup after I initiated a change of language. I can't get hardreset to work as it go right back to the language setup.

I have done hardreset many times before but this time I'm totally lost on how do actually get it to hardreset (the hardreset key combo don't make it hardreset...).

Any help is much appreciated :mellow:

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.