Recommended Posts

Badulay    0

Hi everyone,

I used my asus p 535 for two years and bought omnia II a while ago and I used samsung u600 for a while both of them can use their flash like a flashlight on asus you can press and hold the task switcher key flash turns on till you close. on u 600 press and hold the upper volume control button it starts working

I wonder to know if omnia two has code or app for using its flash like a flashlite thanks for everyone.

There are some solutions but not proper for omnia II

Edited by Badulay

Share this post


Link to post
Share on other sites
Hi everyone,

I used my asus p 535 for two years and bought omnia II a while ago and I used samsung u600 for a while both of them can use their flash like a flashlight on asus you can press and hold the task switcher key flash turns on till you close. on u 600 press and hold the upper volume control button it starts working

I wonder to know if omnia two has code or app for using its flash like a flashlite thanks for everyone.

There are some solutions but not proper for omnia II

Extract the attached folder to my storage or storage card.

Move the shortcut in the folder to device\Windows\Start Menu\Programs

go to start-settings-personal settings-buttons

map one of the button to flash light

Flash_Light.zip

Share this post


Link to post
Share on other sites
jjjjj    0
Extract the attached folder to my storage or storage card.

Move the shortcut in the folder to device\Windows\Start Menu\Programs

go to start-settings-personal settings-buttons

map one of the button to flash light

Share this post


Link to post
Share on other sites
Ed Wong    0

For those of you getting an error message, you'll need to use notepad or a text editor to edit the shortcut file to point to the right path.

If you intend to put in My Storage, you need to change the text in shortcut to:

55#"\My Storage\Flash Light\Flash_Light.exe"

and obviously for Storage Card:

55#"\Storage Card\Flash Light\Flash_Light.exe"

You could also put in the main device, wherever you like, just make sure the shortcut points to the right path.

Ed

Share this post


Link to post
Share on other sites
For those of you getting an error message, you'll need to use notepad or a text editor to edit the shortcut file to point to the right path.

If you intend to put in My Storage, you need to change the text in shortcut to:

55#"\My Storage\Flash Light\Flash_Light.exe"

and obviously for Storage Card:

55#"\Storage Card\Flash Light\Flash_Light.exe"

You could also put in the main device, wherever you like, just make sure the shortcut points to the right path.

Ed

Thanks for adding these info. Totally forgotten the part abt the path

Share this post


Link to post
Share on other sites
C J    0

wow.. finally the wait has paid off. it works exactly like the program torch! :)

Share this post


Link to post
Share on other sites
Thanks a lot, already looking for it long while.

No problem. Too bad I can't remember where I downloaded this app, can't give credit to the app creator.

Share this post


Link to post
Share on other sites
wes58    2

Since I wanted to have a Flash light to work the same way as in Omnia I900 I have decided to write a little application that does it. It can be installed to any location you choose.

- You can assign it to any available button (through WM settings).

- When you press the button (or click on the shortcut) the flash will switch on. 

- After a preset time (default is set to 4 sec) or after a second press of the button the flash will turn off. 

The timeout can be set manually in the registry by changing the value of the key "Timeout" in HKEY_CURRENT_USER\Software\Torch. The setting is in ms so, 4000 equals to 4 sec. time out. If someone wants to try it, feel free.

Torch.Arm.CAB

Share this post


Link to post
Share on other sites
spaanplaat    0
Since I wanted to have a Flash light to work the same way as in Omnia I900 I have decided to write a little application that does it. It can be installed to any location you choose.

- You can assign it to any available button (through WM settings).

- When you press the button (or click on the shortcut) the flash will switch on. 

- After a preset time (default is set to 4 sec) or after a second press of the button the flash will turn off. 

The timeout can be set manually in the registry by changing the value of the key "Timeout" in HKEY_CURRENT_USER\Software\Torch. The setting is in ms so, 4000 equals to 4 sec. time out. If someone wants to try it, feel free.

Doesn't work on B7610.

Share this post


Link to post
Share on other sites
bobobird    0
Since I wanted to have a Flash light to work the same way as in Omnia I900 I have decided to write a little application that does it. It can be installed to any location you choose.

- You can assign it to any available button (through WM settings).

- When you press the button (or click on the shortcut) the flash will switch on. 

- After a preset time (default is set to 4 sec) or after a second press of the button the flash will turn off. 

The timeout can be set manually in the registry by changing the value of the key "Timeout" in HKEY_CURRENT_USER\Software\Torch. The setting is in ms so, 4000 equals to 4 sec. time out. If someone wants to try it, feel free.

Works fine. Thanks.

Share this post


Link to post
Share on other sites
gcrasy    0
Doesn't work on B7610.

Please use the program "Flashlight". It should work in B7610 (not tested, but should be).

I'm the creator.

Share this post


Link to post
Share on other sites
simpagirl    0

My thanx and best compliments it works great on omnia 2 and also the timer...

I have changed it in 15 seconds putting 15000 in the registry key..

It doesn't works on omnia pro b7610, it a pity..

Also flashlite doesn't work on b7610... it install but when start no light (wm 6.1 rom)

Edited by simpagirl

Share this post


Link to post
Share on other sites
wes58    2
My thanx and best compliments it works great on omnia 2 and also the timer...

I have changed it in 15 seconds putting 15000 in the registry key..

It doesn't works on omnia pro b7610, it a pity..

Also flashlite doesn't work on b7610... it install but when start no light (wm 6.1 rom)

Unfortunately it is using Samsung API, so until they provide support for B7610, I don't think it can be done. I made it for my Omnia 2 and because I was happy with the result I wanted to share it.

Share this post


Link to post
Share on other sites
da_mafkeez    0
Unfortunately it is using Samsung API, so until they provide support for B7610, I don't think it can be done. I made it for my Omnia 2 and because I was happy with the result I wanted to share it.

when will the samsung sdk v2 will be available for the B7610?

Share this post


Link to post
Share on other sites
bcwatson    0
Unfortunately it is using Samsung API, so until they provide support for B7610, I don't think it can be done. I made it for my Omnia 2 and because I was happy with the result I wanted to share it.

Unfortunately, doesnt work for the CDMA version (Verizon in US). The app runs and it has a left soft key to activate the light, but every time I try, no light... Didn't even try the shortcut, just ran the .exe...

Share this post


Link to post
Share on other sites
Unfortunately, doesnt work for the CDMA version (Verizon in US). The app runs and it has a left soft key to activate the light, but every time I try, no light... Didn't even try the shortcut, just ran the .exe...

Yeah, didn't work on my Verizon O2 either.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


MoDaCo is part of the MoDaCo.network, © Paul O'Brien 2002-2016. MoDaCo uses IntelliTxt technology.