Sign in to follow this  
Followers 0
pordikey

Flash spica I5700 firmware to Android 2.1

4 posts in this topic

Attention!, this guide is not responsible for the dead device, crooked hands, etc. All you did at your own risk

Downloading:

1. Driver dvr5700.zip http://depositfiles.com/files/a45prl9dc

2. Odin http://depositfiles.com/files/qtz7f78ap

3. spica.ops http://depositfiles.com/files/c1tjzpqpi

4. Latest firmware : http://Samsung-Firmwares.com

Disabled your Samsung New PC Suite

Steps:

1. Set your phone to the Downloader mode (Press Vol Down +Camera+ Power )

2. Wait for 10 sec and

3. Connecting your phone to PC via USB. If you have installed the first time, then put the driver.

4. Launch Odin

Should see the COM port number (can be any) on a yellow background.

If it does not appear, check to install the drivers, sometimes helps to change the USB port.

In the future, you can run Odin to connect the phone, and by the appearance of "COMx" to control the connection process.

5. Select files:

- OPS: spica.ops (go into the archive)

- PHONE, BOOT, PDA, CSC - resp. of the firmware (tar files), if the firmware contains only one. tar file, select it as a PDA!

(* download from samsung firmware and unzip the files)

6. Click on START

The process has started, you should see at Odin, and on the phone: progress bar will move.

At the end of the process at the end of the log Odin appears cherished inscription:

<1> Close serial port and wait until rebooting.

7. Disconnect your device from USB and you are done

Edited by pordikey
0

Share this post


Link to post
Share on other sites
Attention!, this guide is not responsible for the dead device, crooked hands, etc. All you did at your own risk

Downloading:

1. Driver dvr5700.zip http://depositfiles.com/files/a45prl9dc

2. Odin http://depositfiles.com/files/qtz7f78ap

3. spica.ops http://depositfiles.com/files/c1tjzpqpi

4. Latest firmware : http://Samsung-Firmwares.com

Disabled your Samsung New PC Suite

Steps:

1. Set your phone to the Downloader mode (Press Vol Down +Camera+ Power )

2. Wait for 10 sec and

3. Connecting your phone to PC via USB. If you have installed the first time, then put the driver.

4. Launch Odin

Should see the COM port number (can be any) on a yellow background.

If it does not appear, check to install the drivers, sometimes helps to change the USB port.

In the future, you can run Odin to connect the phone, and by the appearance of "COMx" to control the connection process.

5. Select files:

- OPS: spica.ops (go into the archive)

- PHONE, BOOT, PDA, CSC - resp. of the firmware (tar files), if the firmware contains only one. tar file, select it as a PDA!

(* download from samsung firmware and unzip the files)

6. Click on START

The process has started, you should see at Odin, and on the phone: progress bar will move.

At the end of the process at the end of the log Odin appears cherished inscription:

<1> Close serial port and wait until rebooting.

7. Disconnect your device from USB and you are done

Hi

Does this mean that using this method I can Flash my I7500 to the 2.1 firmware of I5700

please suggest

0

Share this post


Link to post
Share on other sites

whats odin and ops?

0

Share this post


Link to post
Share on other sites

Is this a fully working android 2.1 ? i mean camera ,bt and gps working fine ? or its just a mod rom like mustymod's rom?

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

MoDaCo is part of the MoDaCo.network, © Paul O'Brien 2002-2016. MoDaCo uses IntelliTxt technology.