Sign in to follow this  
Jareth

Error while flashing

Recommended Posts

Jareth    0

Hi guys I´m new here and I just decided to upgrade my Optimus On 2.1. I followed the guide in thread HOW TO INSTALL ANDROID 2.1 ON OPTIMUS and hoped it will work but I´ve got Error 6 (or something like that) and now my phone shows just blue screen :-( I´ve followed step by step and don´t know what went wrong and what to do now to get my hone working again... at least. Can someone help me please. Thanks

EDIT:

To add more info this is what the updater showed:

[11:34:11:483] : Write NV item:9028 NV ITEM 9028

[11:34:11:483] : 9028 - NV_DONE_S Item

[11:34:11:592] : _DloadMode()

[11:34:11:592] : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_CHANGE_DLOAD 4

[11:34:11:592] : >>Change Offline Mode [DIAG_CONTROL_F/Mode = 1]

[11:34:11:592] : Clear

[11:34:11:592] : >>Change Dload Mode [DIAG_DLOAD_F]

[11:34:11:592] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - DLOAD

[11:34:11:592] : Clear

[11:34:11:592] : 2_DIAG_DLOAD_F DLOAD_RESET_F do not wait for response

[11:34:11:592] : #ifdef FEATURE_L4

[11:34:11:592] : Clear

[11:34:11:608] : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - Close Port

[11:34:11:608] : Close Port<<

[11:40:51:608] : OPEN_PORT_FAIL

[11:40:51:608] : TYPE_WPARAM_UPGRADE_ERROR

[11:40:51:608] : ¸Ţ˝ĂÁö ş¸łż - TYPE_WPARAM_UPGRADE_ERROR Error Code = 6

[11:40:51:671] : Log finished

Edited by Jareth

Share this post


Link to post
Share on other sites
ZePeido    0

I know a few years have passed, but I had a similar problem today and it took me the whole day to find a solution. Might help somebody else in the future. My log presented the same error code as Jareth's log.

 

I was trying to flash a LG C660 (to unbrick it), with the phone in Emergency Mode (in my phone, to go into Emergency Mode I must turn it on with the Power + Volume Up + Return buttons pressed down) I connected it to the USB cable and started KDZ UPDATER. KDZ UPDATER would detect the phone and start the process, but after a few moments the phone would reboot and stay forever in the LG logo, after about 5 minutes the process would fail.

 

My log was:
[22:18:31:625]  : =============================================
[22:18:31:625]  : Log is started on 28.12.2015, at 22:18:31:625,
executable: E:\LG Optimus Pro (C660)\KDZ_FW_UPD.exe (ProcID: 0x000003d4),
compile time : Jan 19 2012 09:29:39
[22:18:31:625]  : Version :
[22:18:31:625]  : Get Usb Port
[22:18:31:629]  : rsi.strFriendlyName=Porta de comunicações (COM1)
[22:18:31:629]  : Remove Porta de comunicações (COM1)
[22:18:31:629]  : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM4)
[22:18:31:629]  : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[22:18:31:629]  : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM4
[22:18:31:629]  :    Port = COM4
[22:18:31:632]  : UNKNOWN : Req(12) -> Rsp(13)
[22:18:31:634]  : UNKNOWN : Req(12) -> Rsp(13)
[22:18:31:636]  : UNKNOWN : Req(12) -> Rsp(13)
[22:18:31:636]  : >> DIAG_STATUS_F FAILED
[22:18:31:642]  : >>Get Model Name [DIAG_VERNO_F]
[22:18:31:644]  : BAD CONN MODE : Req(0) -> Rsp(3)
[22:18:31:646]  : BAD CONN MODE : Req(0) -> Rsp(3)
[22:18:31:648]  : BAD CONN MODE : Req(0) -> Rsp(3)
[22:18:31:650]  : BAD CONN MODE : Req(0) -> Rsp(3)
[22:18:31:652]  : BAD CONN MODE : Req(0) -> Rsp(3)
[22:18:31:654]  : BAD CONN MODE : Req(0) -> Rsp(3)
[22:18:31:654]  :   FAIL (No Phone)
[22:18:31:654]  : GetModelName() Operation Failed Check Diag CMD
[22:18:31:654]  : EMERGENCY Booting Mode
[22:18:31:654]  : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[22:18:31:656]  :   BS/C660/7Dmg
[22:18:31:656]  : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - C660
[22:18:31:656]  : _Reset_N_Close bFirst = 3
[22:18:31:656]  : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_RESET_THE_PHONE_1ST 8
[22:18:31:656]  : [COM4] Reset [DLOAD]
[22:18:31:656]  : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - RESET
[22:18:31:957]  : DIAG_DLOAD_F DLOAD_RESET_F do not wait for response
[22:18:32:257]  : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[22:18:32:257]  : Close Port<<
[22:25:12:257]  : OPEN_PORT_FAIL
[22:25:12:257]  : TYPE_WPARAM_UPGRADE_ERROR
[22:25:12:257]  : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 6
[22:25:12:289]  : Log finished

 

To bypass the problem I did the following: Start phone in Emergency Mode, Connect phone to PC using USB cable, Start KDZ UPDATER and start process, has soon has the phone reboots and stays forever in the LG logo I would disconnect the USB cable, remove the battery, insert the battery, restart the phone in Emergency Mode, connect the USB cable. As soon as I did this, KDZ UPDATER continued the process and after a few minutes everything ended successfully.

Don't forget to deactivate all LG modems in the Windows device manager.

 

Thanks to Claudiow in another forum for finding the solution to this problem with a LG P698, and to raimundex from that same forum.

Edited by ZePeido
grammar and thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

MoDaCo is part of the MoDaCo.network, © Paul O'Brien 2002-2016. MoDaCo uses IntelliTxt technology.