XVitaha

Very low signal of GSM

23 posts in this topic

Hi everyone. I have a problem with my Orange San Francisco - all the time I have a very low signal of GSM module. In system information I have signal level -101 dBm and can't make or receive any calls.

First I have 2.1-update1 Build OUK_P729BV1.0.0B10, then i was flased it to custom rom with Froyo. Didn't work.

Also i was trying to fix antenna contacts like in that topic http://android.modaco.com/index.php?s=&amp...t&p=1557126 but it also didn't solve my problem.

Now i am having above 1 min of low signal and next 2-3 min. don't have any signal. Tried sim cards of 2 mobile operators.

Would be very grateful for any help, because i am from Ukraine and can't return the phone to the seller.

P.S. Sorry if my English very bad

Edited by XVitaha
0

Share this post


Link to post
Share on other sites
Hi everyone. I have a problem with my Orange San Francisco - all the time I have a very low signal of GSM module. In system information I have signal level -101 dBm and can't make or receive any calls.

First I have 2.1-update1 Build OUK_P729BV1.0.0B10, then i was flased it to custom rom with Froyo. Didn't work.

Also i was trying to fix antenna contacts like in that topic http://android.modaco.com/index.php?s=&amp...t&p=1557126 but it also didn't solve my problem.

Now i am having above 1 min of low signal and next 2-3 min. don't have any signal. Tried sim cards of 2 mobile operators.

Would be very grateful for any help, because i am from Ukraine and can't return the phone to the seller.

P.S. Sorry if my English very bad

Might be bad news then - I had exactly the same problem with my first Blade. Tried 3 different operators sim cards in it with stock and custom Roms and nothing helped. Tried everything I could to fix it but it was a hardware fault and I had to take it back to where I purchased it from for a replacement.

Has this problem just started or has it been like this since you've had it?

0

Share this post


Link to post
Share on other sites
Has this problem just started or has it been like this since you've had it?

This problem was already when I taken the phone. I Will writing to my seller on ebay, maybe he would give me another one.

0

Share this post


Link to post
Share on other sites

Also from Ukraine, have the same issue. Kyivstar ~ 95-110dbm. Nearby nexus - 55dbm on the same sim.

Tried flashing GEN 2 Radio - nothing changed, but I was able to see Utel network (UMTS 2100) but can not connect to it. (RLS4b Rom).

Also tried all wi-fi antenna fixes - nothing.

Noticed that signal can be around 85-90 dbm if phone is laying down for awhile on a same place, but on a light move - signal will fall again to ~ 101 dbm

0

Share this post


Link to post
Share on other sites

Hi, Finally I repaired my phone with the same problem.

Main problem was in antenna's circuit pathes. I attached what was done by one my friend to resolve this issue.

Ps. now It's even beat nearby nexus on the same sim-cards =) 51 dbm vs 55 dBM on Nexus

post-866290-1304015324_thumb.jpg

Edited by Violinist
0

Share this post


Link to post
Share on other sites
Hi, Finally I repaired my phone with the same problem.

Main problem was in antenna's circuit pathes. I attached what was done by one my friend to resolve this issue.

Ps. now It's even beat nearby nexus on the same sim-cards =) 51 dbm vs 55 dBM on Nexus

Hello just one question,did you solder the little wire?because mine circuit it seems to be good...

0

Share this post


Link to post
Share on other sites

tried to make more detailed shots.

post-866290-1305587417_thumb.jpg

0

Share this post


Link to post
Share on other sites

Hi

Thanks very much !

Very clear to see where the solder points are ....

regards

Erich

0

Share this post


Link to post
Share on other sites
Hi, Finally I repaired my phone with the same problem.

Main problem was in antenna's circuit pathes. I attached what was done by one my friend to resolve this issue.

Ps. now It's even beat nearby nexus on the same sim-cards =) 51 dbm vs 55 dBM on Nexus

Does anyone know what was done? Does something need cleaning with some IPA or is soldering required?

There is no indication on the photo what was changed?

TIA

0

Share this post


Link to post
Share on other sites
Does anyone know what was done? Does something need cleaning with some IPA or is soldering required?

There is no indication on the photo what was changed?

TIA

I think it’s the very fine piece of wire bridging the contacts.

That wire is like a cat’s whisker, glad mine works alright. :unsure:

0

Share this post


Link to post
Share on other sites

Been having a no signal issue with my blade,looks like i`ll be digging the soldering iron out to try this as a last resort to kissing it goodbye! :(

0

Share this post


Link to post
Share on other sites

Thanks Violinist !

I was a bit skeptical that this would work, but desperate enough to try. Fiddly bit of soldering, but managed it and where I was getting 0 to 1 bars before, now 3 to 4 in exactly the same spot. Difference between binning the phone and keeping it. Cheers bud.

0

Share this post


Link to post
Share on other sites

guys plz help me... I have the same problem and i did follow those steps, well how can i find that connector "soldier" and what are the simulteneously procedure !?

I really do want to use this phone...

0

Share this post


Link to post
Share on other sites

Violinist

Привет. у меня похожая проблема.

купил blade на ebay.

продавец твердит, что все было с ним ок.

пробовал множество прошивок.

Просто не видит ни одну GSM сеть.

"Укртелеком" только есть в списке, но не регистрирует телефон в этой сети.

Уровень зашкаливает за -100 dBM и выше.

Поможет ли мне твой фикс с проводом?

Edited by -danger-
0

Share this post


Link to post
Share on other sites

Has anyone got any good results with soldering points?

I have the same issue..

Edited by -danger-
0

Share this post


Link to post
Share on other sites

I followed all steps but signal is not good but better than. But was it before.....is there any other way. To to improve signal via hardware

0

Share this post


Link to post
Share on other sites

I followed all steps but signal is not good but better than. But was it before.....is there any other way. To to improve signal via hardware

can you make some photos too? because I don't really understand what points on motherboard need to be joined/soldered.

0

Share this post


Link to post
Share on other sites

can you make some photos too? because I don't really understand what points on motherboard need to be joined/soldered.

The wire is small but ifyou magnify the pictures you can see where to solder.

My phone has had terrible reception since a drop on the floor, given the delicate nature of this part of the PCB I'm not surprised...I'm itching to try this fix.

Did anyone actually get their Blade working properly?

0

Share this post


Link to post
Share on other sites

I would like to confirm that is a hardware problem, and no software can solve the issue (other than applications such as "Signal Boost" by Orange, which uses a WiFi connection; but does not increase GSM reception).

I have followed the photos above, unfortunately I do not have a soldiering gun, therefore tried various different methods. I applied copper cables, and that seemed to work. But it wasn't too effective and came loose too often; so I put some staples in (I have not stapled anything). I have taken out a staple, bend it, and made the two items touch. I have placed 3 staples to increase connectivity, and I now recieve full signal [on O2/giffgaff] indoors.

I wouldn't recommend the staple idea, since it can come loose if the phone is dropped. What I would recommend is that you solder, or ask for a warranty (if you're out of warrenty, you can blag it to the CS). :)

0

Share this post


Link to post
Share on other sites

And what if i insert a little wifi/rf antenne to that socket, next to the radioantenne ? Could that work, to improve the signal ?

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

MoDaCo is part of the MoDaCo.network, © Paul O'Brien 2002-2016. MoDaCo uses IntelliTxt technology.