Guest hedgepigdaniel Posted May 25, 2011 Report Share Posted May 25, 2011 What I did to fix the no signal issue, was to do tpt again with the files of the image.bin that I mentioned before, but using the amss.mbn and the amsshd.mbn files from the european firmware and then I got the signal. You should be able to do TPT if you flashed your Blade with the gen1 oemsbl.mbn and oemsblhd.mbn, maybe wbaw can correct me on this one. from what I read, andresoid used the european amss(hd).mbn the first time though Link to comment Share on other sites More sharing options...
Guest dimatres Posted May 28, 2011 Report Share Posted May 28, 2011 hi all! i had same problem with my v880. thx for this solution! but now it boots only into recovery. i can flash any rom with CWM, but there is clockworkmod again on startup(various ver. of CWM, depending on ROM), even when i turn it on normally i have tried TPT (with replacing appsboot hd.mbn & partition_zte.mbn) with same result - cwm when i turn it on thx Link to comment Share on other sites More sharing options...
Guest andresdroid Posted May 28, 2011 Report Share Posted May 28, 2011 let it start up in ftm mode, then flash Channel1.nvm, file produced during TPT. ciao a. Link to comment Share on other sites More sharing options...
Guest Panzerfaust101 Posted May 30, 2011 Report Share Posted May 30, 2011 (edited) This is SOLVED, I just needed the original file from China Unicom that wbaw gave me and with Cm 7 TPT got it back running, I loose my IMEI and i got it back with this thread http://android.modaco.com/content/zte-blad...-also-the-imei/ the TPT is here http://android.modaco.com/content/zte-blad...n2-tpt-upgrade/ (YOU NEED TO REPLACE amss.mbn, amsshd.mbn, appsboot.mbn, appsboothd.mbn and the partition_zte.mbn= for replacing this files you need the application from fonix232 to dismantle this image.bin http://android.modaco.com/content/zte-blad...ate-5-may-2011/ an get the files in question For the rest I'm really thankfull for the help that fonix232, wbaw and hecatae gave me. Please donate to them they are the best. Join them into the IRC Channel, Freenode , #zteblade Best regards Just to confirm, do we download the CyanogenMod 7 TPT (downloaded from http://android.modaco.com/content/zte-blad...n2-tpt-upgrade/ (size: 105.8mb md5: ce0780ab4104903edc957688b65d598b)), replace the amss.mbn, amsshd.mbn, appsboot.mbn, appsboothd.mbn and the partition_zte.mbn= with the files downloaded from http://android.modaco.com/content/zte-blad...ate-5-may-2011/ and then rezip the file, fix the IMEI (as shown in the link) and boot into fastboot, and then enter "fastboot flashall C:[path to]\[rezipped CM7 TPT].zip" and just reboot the device after the zip file is flashed? Thanks :D Edited May 30, 2011 by Panzerfaust101 Link to comment Share on other sites More sharing options...
Guest hedgepigdaniel Posted May 30, 2011 Report Share Posted May 30, 2011 Just to confirm, do we download the CyanogenMod 7 TPT (downloaded from http://android.modaco.com/content/zte-blad...n2-tpt-upgrade/ (size: 105.8mb md5: ce0780ab4104903edc957688b65d598b)), replace the amss.mbn, amsshd.mbn, appsboot.mbn, appsboothd.mbn and the partition_zte.mbn= with the files downloaded from http://android.modaco.com/content/zte-blad...ate-5-may-2011/ and then rezip the file, fix the IMEI (as shown in the link) and boot into fastboot, and then enter "fastboot flashall C:[path to]\[rezipped CM7 TPT].zip" and just reboot the device after the zip file is flashed? Thanks :D The second link is broken, but if it links to the relevant files from an official China Unicom firmware, then yes. If your radio doesn't work after that then try doing it again without replacing amss.mbn and amsshd.mbn Link to comment Share on other sites More sharing options...
Guest Panzerfaust101 Posted June 2, 2011 Report Share Posted June 2, 2011 Just another question, even if the phone reboots, the phone is technically a G1 Blade now, so would flashing the TPT Hungarian stock ROM (or the ROM from this thread: http://android.modaco.com/content/zte-blad...to-512mb-gen1/) be able to unlock the locked half RAM? I'm tempted to nearly brick mine again in order to gain that extra RAM... Link to comment Share on other sites More sharing options...
Guest wbaw Posted June 2, 2011 Report Share Posted June 2, 2011 (edited) Just another question, even if the phone reboots, the phone is technically a G1 Blade now, so would flashing the TPT Hungarian stock ROM (or the ROM from this thread: http://android.modaco.com/content/zte-blad...to-512mb-gen1/) be able to unlock the locked half RAM? I'm tempted to nearly brick mine again in order to gain that extra RAM... If you have a chinese x/v/u 880 phone then as far as we know you can't 'unlock' extra ram, you must use the chinese appsboot.mbn (with a matching partition_zte.mbn & appsboothd.mbn) which limits it to 256mb ram, otherwise it wont boot. The chinese amss.mbn might not work either, if you get no signal when using that then try a european gen2 amss.mbn Edited June 2, 2011 by wbaw Link to comment Share on other sites More sharing options...
Guest hedgepigdaniel Posted June 2, 2011 Report Share Posted June 2, 2011 @panzerfaust101 - your phone is Chinese isn't it? Did you originally brick it as per the experience of nzkiller in this thread? Link to comment Share on other sites More sharing options...
Guest Panzerfaust101 Posted June 2, 2011 Report Share Posted June 2, 2011 @panzerfaust101 - your phone is Chinese isn't it? Did you originally brick it as per the experience of nzkiller in this thread? Yup. Too bad I can't unlock the RAM then =/ Link to comment Share on other sites More sharing options...
Guest smafroid Posted June 13, 2011 Report Share Posted June 13, 2011 Can I use this step to solve my problem in http://android.modaco.com/content/zte-blad...nesian-version/ I accidentally installed GSM Rom into my CDMA Blade N880 phone... now the phone cannot recognized any SIM card I put on the RUIM.... Please help... desperate.... Link to comment Share on other sites More sharing options...
Guest hedgepigdaniel Posted June 13, 2011 Report Share Posted June 13, 2011 Can I use this step to solve my problem in http://android.modaco.com/content/zte-blad...nesian-version/ I accidentally installed GSM Rom into my CDMA Blade N880 phone... now the phone cannot recognized any SIM card I put on the RUIM.... Please help... desperate.... Do not flash firmware from this forum (from windows or TPT) to a N880 under any circumstances. no. Link to comment Share on other sites More sharing options...
Guest jkdjdon Posted February 4, 2012 Report Share Posted February 4, 2012 This is SOLVED, I just needed the original file from China Unicom that wbaw gave me and with Cm 7 TPT got it back running, I loose my IMEI and i got it back with this thread http://android.modaco.com/content/zte-blad...-also-the-imei/ the TPT is here http://android.modaco.com/content/zte-blad...n2-tpt-upgrade/ (YOU NEED TO REPLACE amss.mbn, amsshd.mbn, appsboot.mbn, appsboothd.mbn and the partition_zte.mbn= for replacing this files you need the application from fonix232 to dismantle this image.bin http://android.modaco.com/content/zte-blad...ate-5-may-2011/ an get the files in question For the rest I'm really thankfull for the help that fonix232, wbaw and hecatae gave me. Please donate to them they are the best. Join them into the IRC Channel, Freenode , #zteblade Best regards got a new dell xcd35 as we all know it is a European blade but in my case i got the new stock and mine dell xcd35 box says MADE in CHINA........... Initially i flashed all TPT of a European version gen2.....and it got boot loop with green android logo......after it i realized that it is Chinese blade as it accepted all v880's update....after trying DE-bricking guides my phone still boots in recovery automatically without any buttons pressed.........i followed your guide but no luck so far..... please anybody out there can help please....... ....and sorry for my poor English Link to comment Share on other sites More sharing options...
Guest uumeshh Posted February 4, 2012 Report Share Posted February 4, 2012 You guys are awesome. Hats off to you. Link to comment Share on other sites More sharing options...
Guest hedgepigdaniel Posted February 4, 2012 Report Share Posted February 4, 2012 got a new dell xcd35 as we all know it is a European blade but in my case i got the new stock and mine dell xcd35 box says MADE in CHINA........... Initially i flashed all TPT of a European version gen2.....and it got boot loop with green android logo......after it i realized that it is Chinese blade as it accepted all v880's update....after trying DE-bricking guides my phone still boots in recovery automatically without any buttons pressed.........i followed your guide but no luck so far..... please anybody out there can help please....... ....and sorry for my poor English http://android.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/ Link to comment Share on other sites More sharing options...
Guest jkdjdon Posted February 5, 2012 Report Share Posted February 5, 2012 http://android.modac...ng-a-zte-blade/ none of these guide worked for me...only two case..... case1. boot loop with green android logo if european update is applied case2. recovery menu automatically after green android logo if chinese v880 update is applied Link to comment Share on other sites More sharing options...
Guest sacra2kx Posted February 6, 2012 Report Share Posted February 6, 2012 Hi I've been here reading this post, because the problem seems to be similiar to mine... I don't know about my IMEI info (probably it is messed up as well =\ ), because my phone hangs in these situations: <br class="Apple-interchange-newline">I have a ZTE Blade Gen2 (came with Android 2.2) it is from Portugal from the communications network called "SAPO" or "TMN" * If stock recovery is installed, as I turn on the phone it goes directly to the FTM mode no matter what I do or what buttons I press * If clockwork recovery is installed and nothing in the system/ it goes back to the clockwork (it seems normal to be like this) * If clockwork recovery is installed and I install any .ZIP or update.ZIP of a costum or stock ROM it stops in the green Android in the boot I've benn trying everything you people said in the post, but as it turns out, my model is different than nzkller's and there are some steps too risky for me to do without some more knowledge... and besides I have some experience in flashing android phones, this kind of problems never happened to me, before... I think I bricked it. and if I did it was trying to change de DATA-SYSTEM-CACHE-OEM partition sizes (I did the change one time successfully and without any troubles at all, but then I tried to do it again to place some ajustments and it bricked then) since then I've tried everything... flash stock recovery with "clockwork recovery", "OSF flasher patched by radmir" and "USDL_P726CV1.00.00", flash the FULL ROM (with the full system.img and all and without it) with "clockwork recovery", "OSF flasher patched by radmir" and "USDL_P726CV1.00.00" and it insists in not booting Android... I'm stuck here! Please help me or guide me to someone who can, because I need the phone working properly with maximum urgency... =S thanks a lot for your patience... =\ Best regards sacra2kx Link to comment Share on other sites More sharing options...
Guest susanico Posted February 27, 2012 Report Share Posted February 27, 2012 maybe this guide could help : http://android.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/ i made my blade brick an hour ago, and this guide help me de-brick it. i used method 3 myself. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now