Nemesis2k9

ZTE v9 Bricked?

11 posts in this topic

Hey all, Recently took the steps required to update my ztev9 with cyanogenmod 7 (modded for zte v9) Installed clockwork recovery, it automatically rebooted phone?? then came up with the recovery, flashed Gapps, Flashed cyanogenmod 7, then phone rebooted (could not wipe cache) Now, it loads cm7, but boot loop ;) Cant access clockwork reocvery no matter what i do.... tried the volume down key, power, all, even the touch buttons at the bottom of the phone. please help.. No idea what to do.. if the phone is bricked, think i will be moving over to iphone. Cheers all

0

Share this post


Link to post
Share on other sites
Hey all, Recently took the steps required to update my ztev9 with cyanogenmod 7 (modded for zte v9) Installed clockwork recovery, it automatically rebooted phone?? then came up with the recovery, flashed Gapps, Flashed cyanogenmod 7, then phone rebooted (could not wipe cache) Now, it loads cm7, but boot loop ;) Cant access clockwork reocvery no matter what i do.... tried the volume down key, power, all, even the touch buttons at the bottom of the phone. please help.. No idea what to do.. if the phone is bricked, think i will be moving over to iphone. Cheers all

read the v9 2.2 update thread and flash first post links. follow post 9's instructions. try reading and following all instructions when updating.

0

Share this post


Link to post
Share on other sites

Hi Nemesis2k9,

I had the same problem. I spent hours and hours trying to recover it.

I stumbled across some instructions (not sure where I found them now).

If you are able to still able to get into FTM mode.

Download the following:

ZTE V9 Stuff

Follow the document (except where it says to send the ID's, copy the patched file into the install directory) found in android_2.2_for_zte_light-read_1st.rar

This worked for me and then I was able to get the CM7 Gingerbread mod.

Best of luck

0

Share this post


Link to post
Share on other sites
Hey all, Recently took the steps required to update my ztev9 with cyanogenmod 7 (modded for zte v9) Installed clockwork recovery, it automatically rebooted phone?? then came up with the recovery, flashed Gapps, Flashed cyanogenmod 7, then phone rebooted (could not wipe cache) Now, it loads cm7, but boot loop ;) Cant access clockwork reocvery no matter what i do.... tried the volume down key, power, all, even the touch buttons at the bottom of the phone. please help.. No idea what to do.. if the phone is bricked, think i will be moving over to iphone. Cheers all

This worked for me.

Take out the battery. Put on the back cover. Hold both volume + and - while plug in the USB cable to a PC.

It will automatically get into FTM mode. Then flash generic 2.2 firmware on it. After flashing, it may stuck in the FTM loop. Put in the battery and flash again.

After 2nd flashing, take out the battery for 10 seconds. Then put it back. Press and hold both Power and Volume + to boot into Android.

1

Share this post


Link to post
Share on other sites

This worked for me.

Take out the battery. Put on the back cover. Hold both volume + and - while plug in the USB cable to a PC.

It will automatically get into FTM mode. Then flash generic 2.2 firmware on it. After flashing, it may stuck in the FTM loop. Put in the battery and flash again.

After 2nd flashing, take out the battery for 10 seconds. Then put it back. Press and hold both Power and Volume + to boot into Android.

THANKS A LOT mate!! I was desperated with my bricked ZTE V9, and your solution worked like a charm!!

Best Regards,

0

Share this post


Link to post
Share on other sites

Hi Nemesis2k9,

I had the same problem. I spent hours and hours trying to recover it.

I stumbled across some instructions (not sure where I found them now).

If you are able to still able to get into FTM mode.

Download the following:

ZTE V9 Stuff

Follow the document (except where it says to send the ID's, copy the patched file into the install directory) found in android_2.2_for_zte_light-read_1st.rar

This worked for me and then I was able to get the CM7 Gingerbread mod.

Best of luck

How can i get the V9 into the FTM Mode?

I think mine is bricked. I only see a green android and nothing else..... I tried to flash the CM7.

thx in advance

0

Share this post


Link to post
Share on other sites

hi,

I have V9C also which is sort of bricked.

i have installed the latest 2.2 rom and since then my touch is not working.

anyone such issue ..??

0

Share this post


Link to post
Share on other sites

This worked for me.

Take out the battery. Put on the back cover. Hold both volume + and - while plug in the USB cable to a PC.

It will automatically get into FTM mode. Then flash generic 2.2 firmware on it. After flashing, it may stuck in the FTM loop. Put in the battery and flash again.

After 2nd flashing, take out the battery for 10 seconds. Then put it back. Press and hold both Power and Volume + to boot into Android.

HI thanks for your time...

i tried the above step however still its stuck on the same blue andriod logo on a skateboard and nothing else.. please help me PM on [email protected]

thanks in advance.

0

Share this post


Link to post
Share on other sites

This worked for me.

Take out the battery. Put on the back cover. Hold both volume + and - while plug in the USB cable to a PC.

It will automatically get into FTM mode. Then flash generic 2.2 firmware on it. After flashing, it may stuck in the FTM loop. Put in the battery and flash again.

After 2nd flashing, take out the battery for 10 seconds. Then put it back. Press and hold both Power and Volume + to boot into Android.

Thank you very much.

0

Share this post


Link to post
Share on other sites

Hi Nemesis2k9,

I had the same problem. I spent hours and hours trying to recover it.

I stumbled across some instructions (not sure where I found them now).

If you are able to still able to get into FTM mode.

Download the following:

ZTE V9 Stuff

Follow the document (except where it says to send the ID's, copy the patched file into the install directory) found in android_2.2_for_zte_light-read_1st.rar

This worked for me and then I was able to get the CM7 Gingerbread mod.

Best of luck

on which id i send the mail ?
0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now

MoDaCo is part of the MoDaCo.network, © Paul O'Brien 2002-2016. MoDaCo uses IntelliTxt technology.