Guest sam_thekiller Posted June 22, 2011 Report Share Posted June 22, 2011 (edited) [*] [KERNEL] zKernel | 2.6.29 | baseband 67 | 22/06/2011 [*]Hi guys, [*]This was requested by several people, but I wasn't really going to do this, knowing that 2.3.3 update was about to be released soon. [*]But since it's postponed to August, here it comes: zKernel for baseband 54+ [*] [*]Features: [*]- latest SE sources (2.1.A.0.492) [*]- FPS cap removed [*]- overclocked to 1.13GHz [*]- in-call volume increased [*]- full netfilter support (droid wall, wifi tether) [*]- drivemapper support (2.2+ native app2sd) [*]- working with basebands 54+ (67 recommended) [*]- no battery drain / sleep issues observed - 100% stock behaviour [*]Developers/Cooks: Feel free to use my kernel in your roms, but please, don't forget to mention which kernel is used and link to this thread [*]Download: [*]This download is for stock 2.1 ROM only! If you're using custom ROM, please check with the relevant dev/cook! [*]zKernel 22062011.zip - update file for xRecovery 0.3 [*]Sources may be downloaded from SE Dev page. Patches are available at FreeXperia Git. [*]Cheers, [*]z Edited June 22, 2011 by sam_thekiller Link to comment Share on other sites More sharing options...
Guest sam_thekiller Posted June 22, 2011 Report Share Posted June 22, 2011 http://forum.xda-developers.com/showthread.php?t=1135475 original forum Kernel for 2.1 rom http://www.mediafire.com/?6089e0agojd8oy8 Link to comment Share on other sites More sharing options...
Guest sam_thekiller Posted June 22, 2011 Report Share Posted June 22, 2011 (edited) Originally Posted by DOOMLorD Download link: (boot.img only) http://www.mediafire.com/?vj9p2xy4p4w24ay [VIMP NOTE FOR FROYO USERS who do not see any change in custom kernel after flashing the boot.img] Download link: (wifi.ko module only) http://www.mediafire.com/?lmh46quh490mzme this file is directly from the kernel package posted by Z in 1st post... i dont know if it works... please check up... Using: kernel => zKernel_22062011 ramdisk => FreeKernel-mod351-Froyo All credits go to: zdzihu (kernel) tkymgr (ramdisk) me [splicing these two together ] Chumby_666 / aZuZu (working hard to get the custom kernel boot tools ready ) P.S.: wifi wont work immediately i need to prepare wifi package for that some functions might be broken (as per ramdisk) please verify please check if u can see it under About Phone Edited June 22, 2011 by sam_thekiller Link to comment Share on other sites More sharing options...
Guest sam_thekiller Posted June 22, 2011 Report Share Posted June 22, 2011 Actually I tested It on BB 67 Rom TripNFroyo 1.5 works Perfect for me Everything is working Link to comment Share on other sites More sharing options...
Guest cjsabaki Posted June 22, 2011 Report Share Posted June 22, 2011 Actually I tested It on BB 67 Rom TripNFroyo 1.5 works Perfect for me Everything is working Ohhhhh hell yeah!!! Thanks Sam!!!!!! Now this Im gonna have to try!!!!!!!! Best regards, Chris Link to comment Share on other sites More sharing options...
Guest amus76 Posted June 22, 2011 Report Share Posted June 22, 2011 If the dev is not on Modaco, I don't think it's a good idea to have a thread like this Link to comment Share on other sites More sharing options...
Guest sam_thekiller Posted June 22, 2011 Report Share Posted June 22, 2011 Hey Chris ......... U recently gave a screenshot of TripnArc 1.0.... Can u please say to trip to include this one in Arc Port ..... It would be best Actually You are only one who have Trip in COntact Cheers SAM SRY 4 BAD English Link to comment Share on other sites More sharing options...
Guest sam_thekiller Posted June 22, 2011 Report Share Posted June 22, 2011 Its Not ALL About who is on XDA or who is on Modaco Its All About Developing And MAke Our X10 better................. And I never Oppose anyone (Personally I mostly like Trip ...... J and Z never lesser than him in my opanion) I only Hate Trolls ................................. Yuck Plz come on the Topic Plz Feedback Your Bugs ......................... I feel Happy to collect Answer of questions From Tons of post frm XDA Link to comment Share on other sites More sharing options...
Guest sam_thekiller Posted June 22, 2011 Report Share Posted June 22, 2011 Hey Guys Some Screenshot From Mine X10 BB 67 Kernel Frm Great Z Rom My Hero TRip....... TRipNfroyo 1.5 quardent 1562 after install lots of apps Link to comment Share on other sites More sharing options...
Guest cjsabaki Posted June 22, 2011 Report Share Posted June 22, 2011 Sam, Hello!! Trip contacts several people on the threads, but I will be happy to pass along the request!! Just restored back to TripNmiui 1.7.0 so I can try out t theme and will see what happens with this new kernel!!! ( Hmmm, will this kernel work with a Ginger Bread rom???? ) Might have some testing to do here today!!! SWEEEEET!!!!! Thank you for sharing!!!!!! Best regards, Chris Link to comment Share on other sites More sharing options...
Guest rederik79 Posted June 22, 2011 Report Share Posted June 22, 2011 I have the stock rom 2.1 with the last bb, can install this? If yes with the xrecovery? Link to comment Share on other sites More sharing options...
Guest scattaman Posted June 22, 2011 Report Share Posted June 22, 2011 Hopefully, this will work with TripNmiui 1.7! I would finally be able to use BB .67! Will test later Link to comment Share on other sites More sharing options...
Guest ceskius Posted June 22, 2011 Report Share Posted June 22, 2011 I have the stock rom 2.1 with the last bb, can install this? If yes with the xrecovery? Yes Link to comment Share on other sites More sharing options...
Guest vaykosill Posted June 22, 2011 Report Share Posted June 22, 2011 Hopefully, this will work with TripNmiui 1.7! I would finally be able to use BB .67! It doesn't :) Link to comment Share on other sites More sharing options...
Guest realunited123 Posted June 22, 2011 Report Share Posted June 22, 2011 Sam, Hello!! Trip contacts several people on the threads, but I will be happy to pass along the request!! Just restored back to TripNmiui 1.7.0 so I can try out t theme and will see what happens with this new kernel!!! ( Hmmm, will this kernel work with a Ginger Bread rom???? ) Might have some testing to do here today!!! SWEEEEET!!!!! Thank you for sharing!!!!!! Best regards, Chris Someone needs to pack GB ramdisk for this to work in GB roms. I might give it a try later if someone already hasn't. Link to comment Share on other sites More sharing options...
Guest cjsabaki Posted June 22, 2011 Report Share Posted June 22, 2011 (edited) Sumthin I am gonna try when I get off work......Trip's 1.7.0 Froyo Miui, flash Hiro's mod352 kernel, without reboot, flash Zkernel ( boot img ) so I can use Hiro's ramdisk, & Z's new kernel for the 67 bband.... Four hours till I can test this...Will report back!! Best regards, Chris P.S......ALWAYS MAKE A BACK UP BEFORE YA FLASH ANYTHING....................TRUST ME......8-) EDIT::::: No go w above..... constant force closes... restored back n trying a few other things..... Edited June 23, 2011 by cjsabaki Link to comment Share on other sites More sharing options...
Guest R4fael Posted June 22, 2011 Report Share Posted June 22, 2011 I belive that it has to be flashed through xRecovery? will it wipe anything? Anyone else tested it with Trips CM6 1.5 ?? How is battery life and deep sleep? Link to comment Share on other sites More sharing options...
Guest Zabihjan Posted June 23, 2011 Report Share Posted June 23, 2011 kernel => zKernel_22062011 ramdisk => FreeKernel-mod351-Froyo please check if u can see it under About Phone Link to comment Share on other sites More sharing options...
Guest sam_thekiller Posted June 23, 2011 Report Share Posted June 23, 2011 hello Guys Would You plzz Like to try 1.7 Miui Froyo Then do these steps First Flash zkernel22062011 then boot.img Linked above (without doing reboot just after Z kernel) then wifi.ko module already linked (without doing reboot just after above two steps) I m Testing soon will post the results Link to comment Share on other sites More sharing options...
Guest sam_thekiller Posted June 23, 2011 Report Share Posted June 23, 2011 [ Using ] kernel => zKernel_22062011 ramdisk => FreeXperia_kernel_beta12b_128mhz (GB) [ All credits go to ] zdzihu (kernel) jerpelea [FreeXperia Team] (ramdisk) me [splicing these two together ] Chumby_666 / aZuZu (working hard to get the custom kernel boot tools ready ) u guys for testing these thing we cook-up [ Requirements ] CM7/GB rom Baseband 2.1.xx (preferably 2.1.67) (you can download it from BaseBand Collection) Baseband patch (2.1.xx) for GB from http://forum.xda-developers.com/show....php?t=1053221 use the file cm7bb54.zip [ Download links ] boot.img only: http://www.mediafire.com/?5r9f41wbb9sw13w wifi module only: http://www.mediafire.com/?hgn29wtdm1d9xgf [ HOW-TO install on CM7 ] make sure that ur rom supports custom kernel booting (CM7 by default supports custom kernel booting) take a FULL NANDROID/RECOVERY BACKUP before testing any of this power off device flash baseband 2.1.xx (preferably 2.1.67) using flashtool boot device and immediately get into recovery flash baseband patch cm7bb54.zip (if ur rom doesnt support baseband 2.1.xx) [CM7, as of now, doesnt support 2.1.xx] flash boot.img flash wifi module restart device now it u should get this kernel and rom working on CM7/GB if ur GB rom doesnt support custom kernel then u need to follow this guide: http://forum.xda-developers.com/show...7#post13022717 before doing anything from here... ( only skip the part when-in u have to flash baseband 2.0.52 & related patch) [i will update that guide in a while] if ur GB rom already supports baseband 2.1.xx THEN DO NOT FLASH BASEBAND PATCH Known issues: even though i am using a ramdisk which sorted out the dhcp issue with wifi i personally have the problem that i have to use static-ip... please do so if u are unable to conenct to wifi with dynamic ip... Link to comment Share on other sites More sharing options...
Guest SourceCode Posted June 23, 2011 Report Share Posted June 23, 2011 hello Guys Would You plzz Like to try 1.7 Miui Froyo Then do these steps First Flash zkernel22062011 then boot.img Linked above (without doing reboot just after Z kernel) then wifi.ko module already linked (without doing reboot just after above two steps) I m Testing soon will post the results Any luck with Trip's 1.7? Thanks! Link to comment Share on other sites More sharing options...
Guest JingleJo Posted June 23, 2011 Report Share Posted June 23, 2011 Any luck with Trip's 1.7? Thanks! The official framecap @ 60fps or 48fps? I'm using wolfbreak's 7.1 and goro's 3.52 and is perfectly stable with long, i mean super long battery life. Goro's kernel is @48fps which is acceptable, for me. Link to comment Share on other sites More sharing options...
Guest iggy2 Posted June 23, 2011 Report Share Posted June 23, 2011 Any luck with Trip's 1.7? Thanks! no, everything FCed on Trips 1.7 w BB67. Link to comment Share on other sites More sharing options...
Guest JingleJo Posted June 23, 2011 Report Share Posted June 23, 2011 no, everything FCed on Trips 1.7 w BB67. This kernel is no different from GORO'S BUT. I'd stick with goro's for stability! Link to comment Share on other sites More sharing options...
Guest My_Immortal Posted June 23, 2011 Report Share Posted June 23, 2011 (edited) I have mixed FreeKernel-mod-352 (MIUI) kernel with the latest ZKernel. Running it on Trip's 1.7 (bb .67). Everything is working!! Just remember to use the WIFI module from the original ZKernel, otherwise the WiFi gives an error. Glad to have a custom kernel working on bb .54+ :) Thanks to all the wonderful X10 Developers!! I did what hirox10 and SourceCode said and I got the kernel working perfectly on 1.7, with baseband .58. All credits should go to Z, Goro (tkymgr), Doomlord, Hirox (for sharing his thoughts on putting together the MIUI version of FreeKernel-mod35.x), and last but not least Trip for MIUI ROM! I attach the zip, you just flash it in xRecovery and you are good to go. Everything works, BUT I cannot record video. Camera is just fine, but if you open camcorder and press the Rec button, the app FC and, until you reboot, every time you try to launch the camera app, it says "Cannot connect to camera". As I said, thankfully, reboot fixes it, but video recording doesn't work. Attachment: *DELETED* SourceCode made a zip with camcorder working! Edited June 23, 2011 by My_Immortal Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now