Jump to content

[RECOVERY] CWM Recovery for LiquidMT v3.0


Guest vache

Recommended Posts

Guest spicysomtam

Hi, I am new to the Liquid MT although this is the fourth Andriod I have had (G1, Blade, Z71, now this). Blade was good, but got nicked in Indonesia :( Z71 ok, ish (it works on 850Mhz 3G in Thailand which is what I use it for). Metal using in the UK.

I can reboot into recovery using adb boot recovery, but is there no key sequence to do it? If not I assume you get some app to allow you to boot into recovery? If so, anyone have a recommend?

I did the acer_ug from 2.2 to 2.3.4 (3.027.01 gen1 emea) then applied the 2.2 recovery. Since I am running the Acer rom, they don't have a reboot into recovery option like CM, etc.

Many thanks in advance, especially for the recovery build. :)

Link to comment
Share on other sites

Guest TechnoLover

key combination for recovery is the following: Volume Up + Volume Down + Focus + Power => Release Focus & press it again, otherwise download "Quick Boot" because the key combination is quite hard..

Link to comment
Share on other sites

Guest Tahitibob

Hi all,

I just installed the leak 4.000.07 on my Liquid Metal. Then I wanted to install the recovery 2.2 in order to install Ginger_dmd_4.000.07_aosp.

But when I launch "install_recovery.cmd" my computer does not find my device. Please notice that I obviously activated Debug USB on my phone.

I also want to say that I have already installed the recovery many times for all the custom ROMs and it always worked fine.

I use the same PC (win 7 64bits). I have rebooted my phone several times.

Does anyone has an idea ?

Thanks in advance

Link to comment
Share on other sites

Guest davidevinavil

Hi all,

I just installed the leak 4.000.07 on my Liquid Metal. Then I wanted to install the recovery 2.2 in order to install Ginger_dmd_4.000.07_aosp.

But when I launch "install_recovery.cmd" my computer does not find my device. Please notice that I obviously activated Debug USB on my phone.

I also want to say that I have already installed the recovery many times for all the custom ROMs and it always worked fine.

I use the same PC (win 7 64bits). I have rebooted my phone several times.

Does anyone has an idea ?

Thanks in advance

Try to use ADB ;)

Link to comment
Share on other sites

Guest TropicalRooster

Just wanted to say thank you very much for the work you put into this, it is indeed fantastic.

I managed to use this with AAP 2.3.5 with no problems at all.

Link to comment
Share on other sites

Guest RohanAJoshi

Hi frendz, I m very new to android..

I m using android 2.2.

Downloaded this, installed as per steps..

Everything is fine..

Used 2.2 recovery.

But I can't see any icon of this app in my phone..

Is there any procure for run in recovery ?

And link of 2.0.recovery is not working..

Plz help guys...

I also made a new thread for help, but nobody helped me..

Link to comment
Share on other sites

Guest k0zmic

It's not an app for your phone.

You use it before you boot up your phone to flash ROM's.

Boot into recovery mode using Volume Up + Volume Down + Focus (Press Camera button Gently) + Power

Link to comment
Share on other sites

Guest RohanAJoshi

It's not an app for your phone.

You use it before you boot up your phone to flash ROM's.

Boot into recovery mode using Volume Up + Volume Down + Focus (Press Camera button Gently) + Power

thanx bro ur help..

As i said, i m using adriod 2.2 stock which comes with my phone.

I m from india, AAP.

I tried as u said but phone is stucking at startup, coming just acer and black screen.

What to do now ?

I m using 2.2 recovery.

2.0 recovery link is dead.

.

Also plz tell me, can i use custom roms by vach etc which are made from EMEA rom and i m from AAP region.

Whats procedure for it ?

I download official 2.3 of emea from acer site.

Can i use it ?

What is use of acer download tool ?

How to use it ?

I saw one thread by vach which have many versions of acer download tool, but now i cant find it, plz link me to that thread.

.

Custom roms thread says use official emea first then flash with custom rom wich base on emea.

Can i use aap instead of emea then custom rom which are based on emea ?

.

If custom rom is based on older version of fw, like Acer_LiquidMT_3.026.01_EMEA-GEN1_03.26.02.zip, then

can i use that custom rom on OS_Acer_4.000.07.EMEA.GEN1_A23G_A.zip ?

.

How to extraxt image from official fw zip so that i can use it in sd download mode ?

Its all exe there.

.

I know, i m asking too much..

Sorry.

.

Thanx in advance..

Edited by RohanAJoshi
Link to comment
Share on other sites

Guest RohanAJoshi

thanx bro ur help..

As i said, i m using adriod 2.2 stock which comes with my phone.

I m from india, AAP.

I tried as u said but phone is stucking at startup, coming just acer and black screen.

What to do now ?

I m using 2.2 recovery.

2.0 recovery link is dead.

.

Also plz tell me, can i use custom roms by vach etc which are made from EMEA rom and i m from AAP region.

Whats procedure for it ?

I download official 2.3 of emea from acer site.

Can i use it ?

What is use of acer download tool ?

How to use it ?

I saw one thread by vach which have many versions of acer download tool, but now i cant find it, plz link me to that thread.

.

Custom roms thread says use official emea first then flash with custom rom wich base on emea.

Can i use aap instead of emea then custom rom which are based on emea ?

.

If custom rom is based on older version of fw, like Acer_LiquidMT_3.026.01_EMEA-GEN1_03.26.02.zip, then

can i use that custom rom on OS_Acer_4.000.07.EMEA.GEN1_A23G_A.zip ?

.

How to extraxt image from official fw zip so that i can use it in sd download mode ?

Its all exe there.

.

I know, i m asking too much..

Sorry.

.

Thanx in advance..

Ok guys..

thanx for your help..

finally did all the things and using now ginger-dmd-400007-aosp.

great work, all of you..

Link to comment
Share on other sites

Guest krovatka

Finally, here it is.

Version 2.2 that fix partitions mounting and nandroid backup/restore.

Only for last 2.3.4 bin. (3.021.01)

For older 2.3.3, use the v2.0.

How to install :

Activate Debug USB on your phone.

Plug your phone to your computer with your USB cable.

Unzip the "RecoveryMT-2.2" folder from the zip file.

Launch "install_recovery.cmd".

Download Link : http://vache-android.com/files/Metal/recov...overyMT-2.2.zip

Report here any issues you may have.

I have gingerbread 2.3.5 installed on an Acer Liquid Metal. Recovery MT-2.2 hangs after the 3 coloured squares appear saying wait, windows slow.. well, after 30 minutes and still nothing my guess is, it is not going to work. So, I tried getting Version 2.0 from the link but this produces an error of "invalid download link" :-( Could we have a new link please....

Link to comment
Share on other sites

Guest TechnoLover

3 coloured squars? are you really in recovery or in fastboot mode?

are you sure, you have installed Recovery or do you want to install recovery?

Link to comment
Share on other sites

Guest blackkids3

Finally, here it is.

Version 2.2 that fix partitions mounting and nandroid backup/restore.

Only for last 2.3.4 bin. (3.021.01)

For older 2.3.3, use the v2.0.

How to install :

Activate Debug USB on your phone.

Plug your phone to your computer with your USB cable.

Unzip the "RecoveryMT-2.2" folder from the zip file.

Launch "install_recovery.cmd".

Download Link : http://vache-android.com/files/Metal/recov...overyMT-2.2.zip

Report here any issues you may have.

If you like it, feel free to donate : btn_donateCC_LG.gif

hi i bought galaxy y which has stock gingerbread 2.3.5

can i root it using aboe method? :)

Then how ...? or any other procedure

[email protected]

Edited by blackkids3
Link to comment
Share on other sites

hi i bought galaxy y which has stock gingerbread 2.3.5

can i root it using aboe method? :)

Then how ...? or any other procedure

[email protected]

hi i bought galaxy y which has stock gingerbread 2.3.5

can i root it using aboe method? :)

Then how ...? or any other procedure

[email protected]

No, this is for the Acer Liquid Metal only. You need to find the appropriate forum for your device. I'd suggest looking on XDA or Samdroid.

Link to comment
Share on other sites

Guest Sascrypte

For older 2.3.3, use the v2.0.

Gives me Invalid download link.

I want to set my phone back to the original 2.2, but can't get it there, anybody some tips?

Thanks in advance!

Link to comment
Share on other sites

Anyone tried 3.0 yet?

Any news about what's updated/new?

I'm new to the LiquidMT (just got it yesterday) but i'll give it a go tonight.

Yup, working fine so far.

It's ClockworkMod so it works with ROM Manager which makes Nandroid's a bit simpler to do.

Link to comment
Share on other sites

It doesnt work for me..

The installation of OS_Acer_4.000.13.EMEA.GEN1_A23G_LiquidMT (official) and RecoveryMT-3.0

went fine. Till i tried to install a custom rom.

When i'm trying to open recovery via the key combo i'll get an android standing in a triangle with a

exclamation point, also tried opening recovery via quickboot. But the app closes when i hit recovery.

Anyone knows what went wrong?

Already reinstalled both the os and recovery and did a wipe via the os itselfe (including sd card)

Link to comment
Share on other sites

Guest astuermer

I did a nandroid backup with v3.0 but...

It's over 1 GB in size!!!

android_secure.img 420mb

android.img 448mb

boot.img 5mb

cache.img 0mb

data.img 117mb

nandroid.md5 0mb

recovery.img 5mb

system.img 164mb

these files are stored after a backup in CWM in clockworkmod/backup/2011-11-04

I have a 16 gb microsd, fat32 formatted, no ext or so.

any idea?

Link to comment
Share on other sites

Guest chemicalbuz

It doesnt work for me..

The installation of OS_Acer_4.000.13.EMEA.GEN1_A23G_LiquidMT (official) and RecoveryMT-3.0

went fine. Till i tried to install a custom rom.

When i'm trying to open recovery via the key combo i'll get an android standing in a triangle with a

exclamation point, also tried opening recovery via quickboot. But the app closes when i hit recovery.

Anyone knows what went wrong?

Already reinstalled both the os and recovery and did a wipe via the os itselfe (including sd card)

That symbol is standard android recovery symbol, probably cwm isn't installed at all

Link to comment
Share on other sites

During the installation it said that it was all "okay" or something..

But suppose that it isnt installed at all, how can i install it properly?

I mean, you can't do anything more that starting the install_recovery

right?

EDIT

Also tried to reinstall the acer driver but withouth anny positive effect.

Some more info:

When i do the key combo, it looks like it wants to start (unzipping the box figure)

but then i get the android standing next to a triangle figure and i'm stuck (need to remove the battery)

Anyone?

Edited by SybNl
Link to comment
Share on other sites

I did a nandroid backup with v3.0 but...

It's over 1 GB in size!!!

these files are stored after a backup in CWM in clockworkmod/backup/2011-11-04

I have a 16 gb microsd, fat32 formatted, no ext or so.

any idea?

I can see it's backed up Android_Secure which is there all your apps that are on the SD Card go.

Although, I'm not sure what Android.img is.

Edited by k0zmic
Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.