Guest Garfield5 Posted December 4, 2011 Report Share Posted December 4, 2011 Just did a format of the SD card and full wipe and put the ACER BIN on and recovery 2.2. Everything wiped and back to stock completely. Flashed 7.4. Booted up and picked Android Setup as there were two choices. It will not connect to my account still. Have any ideas what might be wrong? Still no Market in the apps section either. I did absolutely everything to get back to new form 2. Could not retrieve contacts from gmail. Turns out the user id while sign-in to google account should be in this ([email protected]) format rather than ([email protected]). Well, you could try this. worked for me! Link to comment Share on other sites More sharing options...
Guest scotth324 Posted December 4, 2011 Report Share Posted December 4, 2011 I did try that. I tried installing the market apk as well and didn't work. Have no clue what is going wrong. I am going to wait for a little while till there is a more stable one out with SIM card reception and see if it works then. I wish I could get it to work because I would test bluetooth out as well as I have one in my car for talking on the road. Could it be because I am in Canada? Has anyone tried this ROM in North America yet? Seems most of you are from overseas. Link to comment Share on other sites More sharing options...
Guest davidevinavil Posted December 4, 2011 Report Share Posted December 4, 2011 Maybe in your country you can't access without sim.. You could try to access without sim and stock rom to see if works or not.. Btw I'm working to fix sim card but isn't easy.. Link to comment Share on other sites More sharing options...
Guest scotth324 Posted December 4, 2011 Report Share Posted December 4, 2011 I know it will work without SIM as I have an S100 without a SIM that I put my account onto. Now I did all this this morning and now when trying to go back to my Gingerouney backup in recovery 3.0 it will not recover anymore. I did format the card and I put the partition to 500mb instead of 1000mb. Will this make a backup not complete? It simply hangs on the boot screen now. Gonna go to T&L for a while now I think. Link to comment Share on other sites More sharing options...
Guest ben75011 Posted December 5, 2011 Report Share Posted December 5, 2011 Hello. First, sorry for my bad english :). I have im moment a Liquid s-100 with 256 mo swap and liquid next. I would like to buy a Metal. 1-would be Metal faster as my S100 with 256 mo swap? 2-what doesnt work with this CM7 beta? Thks. Link to comment Share on other sites More sharing options...
Guest Lens_flare Posted December 5, 2011 Report Share Posted December 5, 2011 It would be much faster than liquid even without swap. All working except FM and SIM recognition, and some little bugs :P Link to comment Share on other sites More sharing options...
Guest ben75011 Posted December 5, 2011 Report Share Posted December 5, 2011 THANKS but what means SIM recognition? thks Link to comment Share on other sites More sharing options...
Guest Lens_flare Posted December 5, 2011 Report Share Posted December 5, 2011 System stands that sim is missing so you can't read sim contacts etc but calls, sms and data works. Link to comment Share on other sites More sharing options...
Guest stoorzsto Posted December 6, 2011 Report Share Posted December 6, 2011 WIFI hotspot can not be opened. Link to comment Share on other sites More sharing options...
Guest upasaka Posted December 7, 2011 Report Share Posted December 7, 2011 THANKS dav and len。 好像彩信用着有问题。 Link to comment Share on other sites More sharing options...
Guest davidevinavil Posted December 7, 2011 Report Share Posted December 7, 2011 WIFI hotspot can not be opened. It's pretty fixed ;) Link to comment Share on other sites More sharing options...
Guest vikings123 Posted December 7, 2011 Report Share Posted December 7, 2011 It's pretty fixed ;) WiFi fixed? In v4.0? Link to comment Share on other sites More sharing options...
Guest davidevinavil Posted December 7, 2011 Report Share Posted December 7, 2011 WiFi fixed? In v4.0? No in 4.. In next release ;) And I mean wifi hotspot.. Link to comment Share on other sites More sharing options...
Guest moeaeon Posted December 7, 2011 Report Share Posted December 7, 2011 No in 4.. In next release ;) And I mean wifi hotspot.. Is there a ToDo-List for the "next release"? =) Link to comment Share on other sites More sharing options...
Guest Lens_flare Posted December 7, 2011 Report Share Posted December 7, 2011 (edited) as usual: sim, fm.. but have found something that kills google services recognition.. it's in wifi.. to access to google seems you should have data connection only. Edited December 7, 2011 by Lens_flare Link to comment Share on other sites More sharing options...
Guest stoorzsto Posted December 7, 2011 Report Share Posted December 7, 2011 (edited) Hi,David and Lens,can you make a zip pack of xt9IME? Thanks . Edited December 7, 2011 by stoorzsto Link to comment Share on other sites More sharing options...
Guest davidevinavil Posted December 10, 2011 Report Share Posted December 10, 2011 I need help about libaudio.. It's pretty full working but has a little issue: at every call it set volume at a low level and when press vol+ or vol- it set at right level... This is the source of libaudio.so http://www.multiupload.com/9NE6DNV4I2 Into this source you can find this status_t AudioHardware::setVoiceVolume(float v) { int factor = read_int("/system/etc/volumefactor.txt"); if(factor<0) factor = 120; int vol = lrint(v * factor); LOGD("setVoiceVolume(%f)\n", v); LOGI("Setting in-call volume to %d (available range is 0 to %d)\n", vol, factor); if(msm_set_voice_rx_vol(vol)) { LOGE("msm_set_voice_rx_vol(%d) failed errno = %d",vol,errno); return -1; } LOGV("msm_set_voice_rx_vol(%d) succeeded",vol); return NO_ERROR; } setVoiceVolume is a function called from what I don't know but I'm sure it is called every time I push volume button, so my idea is to call it every time is starting a call But how to do this? Any help is appreciated... Link to comment Share on other sites More sharing options...
Guest Lens_flare Posted December 10, 2011 Report Share Posted December 10, 2011 my idea is to call it every time is starting a call But how to do this? Not a libaudio issue though.. need a kernel modifications.. Link to comment Share on other sites More sharing options...
Guest davidevinavil Posted December 10, 2011 Report Share Posted December 10, 2011 V/AudioHardwareMSM7X30( 147): In SPEAKER D/AudioHardwareMSM7X30( 147): new_rx = 8 D/AudioHardwareMSM7X30( 147): new_tx = 20 D/AudioHardwareMSM7X30( 147): updateDeviceInfo: E rx_device 2 and tx_device 1 D/AudioHardwareMSM7X30( 147): No active voicecall/playback, disabling cur_rx 65535 D/AudioHardwareMSM7X30( 147): No active voicecall/recording, disabling cur_tx 65535 D/AudioHardwareMSM7X30( 147): updateDeviceInfo: X cur_rx 2 cur_tx 1 D/AudioHardwareMSM7X30( 147): AudioStreamOutMSM72xx::standby() D/AudioHardwareMSM7X30( 147): setVoiceVolume(1.000000) I/AudioHardwareMSM7X30( 147): Setting in-call volume to 100 (available range is 0 to 100) E/AudioHardwareMSM7X30( 147): msm_set_voice_rx_vol(100) failed errno = 1 V/AudioHardwareMSM7X30( 147): setFmVolume(100.000000) V/AudioHardwareMSM7X30( 147): No Active FM stream is running The only error I see is this E/AudioHardwareMSM7X30( 147): msm_set_voice_rx_vol(100) failed errno = 1 It append on boot, but on call it disappears V/AudioHardwareMSM7X30( 147): AudioStreamOutMSM72xx::setParameters() routing=1 V/AudioHardwareMSM7X30( 147): set output routing 1 I/AudioHardwareMSM7X30( 147): doRouting -1 1 I/AudioHardwareMSM7X30( 147): Routing audio to Handset I/AudioHardwareMSM7X30( 147): Routing audio to handset with DualMike enabled V/AudioHardwareMSM7X30( 147): doAudioRouteOrMute() device 9, mMode 2, mMicMute 1 V/AudioHardwareMSM7X30( 147): do_route_audio_rpc(9, 0, 1) V/AudioHardwareMSM7X30( 147): In DUALMIC_HANDSET D/AudioHardwareMSM7X30( 147): new_rx = 0 D/AudioHardwareMSM7X30( 147): new_tx = 20 V/AudioHardwareMSM7X30( 147): Going to enable RX/TX device for voice stream D/AudioHardwareMSM7X30( 147): Starting voice on Rx 0 and Tx 20 device D/AudioHardwareMSM7X30( 147): value of device and enable is 2 0 D/AudioHardwareMSM7X30( 147): value of device and enable is 0 1 D/AudioHardwareMSM7X30( 147): value of device and enable is 1 1 D/AudioHardwareMSM7X30( 147): Starting voice call and UnMuting the call D/AudioHardwareMSM7X30( 147): updateDeviceInfo: E rx_device 0 and tx_device 1 D/AudioHardwareMSM7X30( 147): case VOICE_CALL D/AudioHardwareMSM7X30( 147): updateDeviceInfo: X cur_rx 0 cur_tx 1 V/AudioHardwareMSM7X30( 147): setFmVolume(100.000000) V/AudioHardwareMSM7X30( 147): No Active FM stream is running Link to comment Share on other sites More sharing options...
Guest Lens_flare Posted December 10, 2011 Report Share Posted December 10, 2011 (edited) The only error I see is this Of course, you can't see kernel log :] But soundsystem is not only an audiolibrary ;) Let's ask to Thepasto, he worked on kernel audio so he could know.. 10 User(s) are reading this topic 4 members, 6 guests, 0 anonymous users Lens_flare,davidevinavil,vache,thepasto thepasto, Wow, you are already here :D Edited December 10, 2011 by Lens_flare Link to comment Share on other sites More sharing options...
Guest davidevinavil Posted December 10, 2011 Report Share Posted December 10, 2011 Of course, you can't see kernel log :] But soundsystem is not only an audiolibrary ;) Let's ask to Thepasto, he worked on kernel audio so he could know.. thepasto, Wow, you are already here :D I'm talking with Thepasto since some days ;) Link to comment Share on other sites More sharing options...
Guest davidevinavil Posted December 10, 2011 Report Share Posted December 10, 2011 About volume issue I'm not completely sure is caused by kernel.. With vision libaudio source this issue isn't present :/ Link to comment Share on other sites More sharing options...
Guest davidevinavil Posted December 10, 2011 Report Share Posted December 10, 2011 I made a dirty workaround.. I replace setFmVolume content with setVoiceVolume and fix volume at 100.. So at every call volume will fix to 100 but I don't know if FM will work when avaiable ;) Link to comment Share on other sites More sharing options...
Guest davidevinavil Posted December 11, 2011 Report Share Posted December 11, 2011 XT9_cm7 Flash as an update.zip by recovery without wipe.. Link to comment Share on other sites More sharing options...
Guest stonebear Posted December 11, 2011 Report Share Posted December 11, 2011 (edited) So we flash this in the usual way, then do I need to flash gapps or something? Thought I might take a look. :) Edited December 11, 2011 by stonebear Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now