Jump to content

[SOLVED] [SOLUTION] OSFII Is Bricked


Guest AmbushReality

Recommended Posts

Guest AmbushReality

Alright. im at a dead end here. I tried to return to Stock and my phone wont boot into any ROM Whatssoever. Ive tried flashing CWM with the QPST Method, fastboot and everything but it just boots into FTM. ARGHH

Edited by AmbushReality
Link to comment
Share on other sites

Guest alphadavid99

I can help because this happened to me

The only problem is that you will have to boot your phone an alternative way

I havent got any links

You will need a charger

The zte flasher and the software updater

Your usb cable

The osf2 unlocker

And a rom preferably stock based for now

Firstly check if you can update your phone through zte software update

If so then after the update is done

Take out battery for a minute then put it back in

Do not touch any buttons (dont press power button)

put the charger in

It shpuld show green Android then turn black then come up with the charging screen if so then you press the power button

Then you let it boot

If the zte soft ware doesnt work

Flash recovery onto your phone with the osf2 unlocker

Take out battery after it has finished

Leave for a minute

plug in charger

Let it go to chrging screen

hold volume down

It should go to recovery

Then flash your rom

Then turn off phone after

Plug in charger

Charging screen

Power button let it boot up

(If you cant get into recovery by volume down try volume up)

Hope fully this works if it doesnt post your situation and i will see what i can do

Link to comment
Share on other sites

Guest alphadavid99

You hold volume down or volume up and press power button to get to recovery

Also wait until u see your battery charging screen and it shows an animated battery icon in middle of screen

Edited by alphadavid99
Link to comment
Share on other sites

Guest AmbushReality

Heres the problem, when i put the usb in it just does the FTM mode, also, ive tried download.exe (CWM Flasher unlocker) and it does nothing

Link to comment
Share on other sites

Guest iharrybao

hi ambush, I think you can try my words as i posted in the forum. but download your p736v rom for your osf2 not p736e. it must works!

Link to comment
Share on other sites

Guest iharrybao

Can you link to the ROM+Thread Pweasey? Cheers ;-)

it's here.and do sure you download your P736V stock ROM on the first step

Link to comment
Share on other sites

Guest AmbushReality

Nope. Everything fails. FTM Mode Again. And Everytime i put the charger in it goes to FTM mode. Every key combo does the same. Im at a dead end. Gotta wait 7 months for a new one o.o

Link to comment
Share on other sites

Guest irishpancake

I thought it was dead. Nothing worked. I had to press all buttons and then do some othet stuff

Man, that's a very poor explanation of how you fixed it.....can you give more info, for the forum???

Link to comment
Share on other sites

Guest AmbushReality

Alright. After trying the unlock qpst method, the zte updater and iharrybao's force flasher, it still wouldnt work. So i tried pressing every key on my phone with power. So then i pressed all the keys at the same time and it booted into cwm. So i flashed a rom and it booted. Simple really

Link to comment
Share on other sites

Guest BLu3HaZe

Are you sure it's not a hardware fault? That sort of thing was very common on Sony Ericsson and certain Nokia phones, when pressing all buttons at once, it used to be enough force to bend the circuit board to reestablish any broken connections. I have a K530i which can only be turned on or flashed while holding all buttons in.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.