Jump to content

stock rom with baseband 109808


Guest voyager33

Recommended Posts

Guest tcpaulh

0. Backup anything you dont want to lose. You should make a backup of your imei while you are at it :- https://docs.google.com/document/d/1fHCqgv3Erj-IOAHssv20sxVMaphQJiVr3hebq9oQHNo/edit?pli=1

1. Download a rom from http://g300.thebronasium.com/huawei/

2. Download the 'middle package' file from (It's on the second line of the first page)

3. Decompress both files using winrar or 7zip or similar. Note that among the extracted files for each archive (from step 1 and 2) is a file called UPDATE.APP

4. Place the big UPDATE.APP file in a folder called dload on your SD card. Put the SD card in the phone.

5. Power on the phone using power button AND volume+ AND volume- all at the same time. Keep those three buttons pressed till the software starts updating. It will give you a brand new ROM on your phone.

6 If (and only if) it hangs or doesn't work, pull the battery then replace the big UPDATE.APP with the little one and go back to step 5. This should pave the way for a successful update. Then try again with the big UPDATE.APP

Link to comment
Share on other sites

Guest Emmepi

Thanks a lot !

Everything worked fine, without 6th step !

Just placed b888 (euro unbranded) on SDCard, maxi combo (vol+ vol- power), then pink progress bar.

No problem, after few reboots, G300 came back to life !

No IMEI lost

Then superrecovery, cwm and everything's ok now !

Device is more responsive on b888

Infusion ICS gave me less than 100mb ram available, b888 is still near 200mb ! (Only few apps installed !)

TCPAULH, THANKS ONCE AGAIN FOR YOUR MINI TUTORIAL, BUT REALLY ACCURATE & EFFICIENT !

Link to comment
Share on other sites

Guest tcpaulh

:) No worries

Just to point out that we have to change our ideas about free ram. There's a new paradigm. Free ram is wasted ram. ICS puts stuff in ram it thinks might be needed. This results in better performance as loading from flash memory to ram is eliminated (at point of requirement) in a lot of cases as it's already there.

Edited by tcpaulh
Link to comment
Share on other sites

Guest pedroxe

i got some strange behaviour...

when using the imei 0 or not mine the splash image/boot image is the original one with the huawei logo and if i'm using my own imei, and after restore it, the boot image is showing the chinese logo 3g wo something...

why is this happening?

Link to comment
Share on other sites

Guest elperroderoke

i got some strange behaviour...

when using the imei 0 or not mine the splash image/boot image is the original one with the huawei logo and if i'm using my own imei, and after restore it, the boot image is showing the chinese logo 3g wo something...

why is this happening?

Because the IMEI backup was made when the phone was "that way", and the IMEI backup includes more things not just the IMEI, and all that are back when you restore it.

Regards.

Regards.

Link to comment
Share on other sites

  • 5 months later...

0. Backup anything you dont want to lose. You should make a backup of your imei while you are at it :- https://docs.google....QHNo/edit?pli=1

1. Download a rom from http://g300.thebronasium.com/huawei/

2. Download the 'middle package' file from http://www.modaco.co...ade-tool-found/ (It's on the second line of the first page)

3. Decompress both files using winrar or 7zip or similar. Note that among the extracted files for each archive (from step 1 and 2) is a file called UPDATE.APP

4. Place the big UPDATE.APP file in a folder called dload on your SD card. Put the SD card in the phone.

5. Power on the phone using power button AND volume+ AND volume- all at the same time. Keep those three buttons pressed till the software starts updating. It will give you a brand new ROM on your phone.

6 If (and only if) it hangs or doesn't work, pull the battery then replace the big UPDATE.APP with the little one and go back to step 5. This should pave the way for a successful update. Then try again with the big UPDATE.APP

Does this still work for newer ICS versions? like B935

Link to comment
Share on other sites

  • 11 months later...
Guest Inglesina94

Hi, does this method work to downgrade from android version 4.0.3, baseband 2030 - build B952 to android version 2.3.6 baseband 109808 build 895?
 

Thanks in advance.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.