Sign in to follow this  
Followers 0
zodh

power button no longer works.

31 posts in this topic

Good afternoon. I did fall from my phone and the power button no longer works.

how I can do.

thank you

0

Share this post


Link to post
Share on other sites

Good afternoon. I can not find gpio-keys.kl on my pc

0

Share this post


Link to post
Share on other sites

thank you for your answer. I made it a handling function. button on the camera is transform in c power button. succeeded al extinguish but I can not turn it on.

button to operate in one direction but not the other.

telephonne here is extinguished and I can not turn it on.

0

Share this post


Link to post
Share on other sites

If the phone physically cannot be turned on then it's not an issue caused by an app. best thing to do first is to remove the back cover and look where the power button goes. You should be able to see the small surface mounted button under the plastic button you normally press. Try using a pin to push this down to turn the phone on. If the phone does not turn on then 100% you have a hardware issue and you need to get the phone repaired. There is no way to swap the button over using software that will allow you to turn the phone on from shutdown - the power button is wired up to the power circuitry as you would expect it to be.

0

Share this post


Link to post
Share on other sites

my problem and a physical power button box. j all have already done what you said but nothing to do he does not start. unplugged reconnect batteris ps does not.

0

Share this post


Link to post
Share on other sites

You need to take the phone to orange shop for repair i think :(

0

Share this post


Link to post
Share on other sites

You need to take the phone to orange shop for repair i think :(

Only if you have a receipt.

0

Share this post


Link to post
Share on other sites

great now my power button is gone :angry:

Completely unusable, even if I press hard.

0

Share this post


Link to post
Share on other sites

hmm maybe its time to get rid of my osd while it still works and is in good nick and buy a razr i off fleabay :blush:

0

Share this post


Link to post
Share on other sites

This is bad... Mine is probably going to break then, but I never (no jokes) drop my phone or scratch it. I had not a single scratch on my blade.

0

Share this post


Link to post
Share on other sites

great now my power button is gone :angry:

Completely unusable, even if I press hard.

Worrying

Has anybody checked to make sure that it's 100% broken? Take the back off the phone and use a pin to push and hold down the button below the plastic button.

0

Share this post


Link to post
Share on other sites

If I push very hard it works, but it worries me to be pressing so hard that I may damage the actual button underneath. It seems the button itself is fine , and I know if I took the device apart I could wedge/glue something between the power button and the one we press to raise it. This would void warranty as I would have to remove the white security tabs over the screws, so not a good plan really but, it is a serious design floor.

Edited by jikobutsu
0

Share this post


Link to post
Share on other sites

If I push very hard it works, but it worries me to be pressing so hard that I may damage the actual button underneath. It seems the button itself is fine , and I know if I took the device apart I could wedge/glue something between the power button and the one we press to raise it. This would void warranty as I would have to remove the white security tabs over the screws, so not a good plan really but, it is a serious design flaw.

I agree with that. Glad that the button isn't 100% broken though.. just very hard to press down. It IS a design flaw though.. BTW you can access the button without removing any security tabs.. might be able to put a small piece of card under it using some tweezers.

BTW has anybody got volume wake working? This would be useful. I did read somewhere that volume wake is disabled if you use the sliding lock screen. I'll test things out when I have some time as I may need to add WAKE to some of the keypad files.

Failing that it'll need some framework editing

0

Share this post


Link to post
Share on other sites

I did try getting volume wake working, I made changes to android policy and generic but it would not work for me.......may have another crack at it tomorrow.

The power button is having no effect on me really as I use proximity sensor pro so when I take device in and out of case screen goes on/off. Some say this app stops device sleeping, however, it sleeps just fine for me, and it does not drain battery. Only draw back really is I wont want to risk powering down in case the button completely fails, not a big deal really leaving the device on permanently ;)

I will take it back for replacement if the button fails completely as I am bound to orange via contract :wacko: which is not all bad when it comes to your device developing a fault as usually you will have a replacement within days.

This app may help: http://forum.xda-developers.com/showthread.php?t=850464

Edited by jikobutsu
0

Share this post


Link to post
Share on other sites

I'm working on a fix all you need is a piece of card and a screw driver

0

Share this post


Link to post
Share on other sites

I'm working on a fix all you need is a piece of card and a screw driver

Had a go at this method myself! Buttons not quite as 'clicky' as it originally was but it works again.

0

Share this post


Link to post
Share on other sites

Had a go at this method myself! Buttons not quite as 'clicky' as it originally was but it works again.

Try this, where the button is, there is an arm in the centre which goes to the power switch, raise it a little so there is a gap for a thin peice of card.....This works 100% for me, my button is now better than when I buy it, very sensitive to touch, only need to press power button lightly and it works :D

0

Share this post


Link to post
Share on other sites

Try this, where the button is, there is an arm in the centre which goes to the power switch, raise it a little so there is a gap for a thin peice of card.....This works 100% for me, my button is now better than when I buy it, very sensitive to touch, only need to press power button lightly and it works :D

Exactly what I did. Took a couple of goes myself to get the snuggest fit, but persevere and it'll work. Was worried the back wasnt going

to fit at first though.

0

Share this post


Link to post
Share on other sites

I love it when the simple solution is the one that works best.

0

Share this post


Link to post
Share on other sites

did you try it flibblesan ?

It works very well, the button is better than when I buy the device lol

0

Share this post


Link to post
Share on other sites

Not yet. I'll probably use a small piece of plastic from an old card or something.

1

Share this post


Link to post
Share on other sites

Well I'm glad to see it's actually a simple fix, although touch wood I won't need it.

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

MoDaCo is part of the MoDaCo.network, © Paul O'Brien 2002-2016. MoDaCo uses IntelliTxt technology.