Sign in to follow this  
Followers 0
glossywhite

"Hudl" info, gleaned using the terminal

2 posts in this topic

## THIS IS AN OUTBOUND DATA PIPE - QUESTIONS WILL NOT BE RESPONDED TO - IF THIS DATA IS PERTINENT TO YOUR KNOWLEDGE LEVEL, YOU WON'T NEED HELP ##

 

 

 

VARIOUS:

 

Processor	: ARMv7 Processor rev 0 (v7l)
processor	: 0
BogoMIPS	: 1631.46

processor	: 1
BogoMIPS	: 1631.46

processor	: 2
BogoMIPS	: 1631.46

processor	: 3
BogoMIPS	: 1631.46

Features	: swp half thumb fastmult vfp edsp neon vfpv3 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x3
CPU part	: 0xc09
CPU revision	: 0

Hardware	: RK30board
Revision	: 0000
Serial		: 0000000000000000
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
/sys/kernel/debug /sys/kernel/debug debugfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/secure tmpfs rw,relatime,mode=700 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
/dev/block/mtdblock7 /system ext4 ro,noatime,nodiratime,barrier=1,data=ordered,noauto_da_alloc 0 0
/dev/block/mtdblock9 /data ext4 rw,nosuid,nodev,noatime,nodiratime,barrier=1,data=ordered,noauto_da_alloc 0 0
/dev/block/mtdblock5 /cache ext4 rw,nosuid,nodev,noatime,nodiratime,barrier=1,data=ordered,noauto_da_alloc 0 0
/dev/fuse /mnt/shell/emulated fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
tmpfs /storage/emulated tmpfs rw,nosuid,nodev,relatime,mode=050,gid=1028 0 0
/dev/fuse /storage/emulated/0 fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /storage/emulated/0/Android/obb fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /storage/emulated/legacy fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /storage/emulated/legacy/Android/obb fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
MemTotal:        1048576 kB
MemFree:           26028 kB
Buffers:            2732 kB
Cached:           100444 kB
SwapCached:            0 kB
Active:           500260 kB
Inactive:          55252 kB
Active(anon):     454080 kB
Inactive(anon):     6060 kB
Active(file):      46180 kB
Inactive(file):    49192 kB
Unevictable:        1664 kB
Mlocked:               0 kB
HighTotal:        548864 kB
HighFree:           1408 kB
LowTotal:         335748 kB
LowFree:           24620 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:                 0 kB
Writeback:             0 kB
AnonPages:        454060 kB
Mapped:            59752 kB
Shmem:              6140 kB
Slab:              17472 kB
SReclaimable:       5292 kB
SUnreclaim:        12180 kB
KernelStack:        7000 kB
PageTables:        11908 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:      442304 kB
Committed_AS:    8200812 kB
VmallocTotal:     516096 kB
VmallocUsed:       95236 kB
VmallocChunk:     372612 kB
acct
bcm4329_cybertan.hcd
bcm4329_samsung.hcd
bcm4329_usi.hcd
cache
charger
config
d
data
default.prop
dev
drmboot.ko
etc
init
init.goldfish.rc
init.rc
init.rk30board.rc
init.rk30board.usb.rc
init.trace.rc
init.usb.rc
mnt
proc
res
rk30xxnand_ko.ko.3.0.36+
rk30xxnand_ko.ko.3.0.8+
root
sbin
sdcard
storage
sys
system
ueventd.goldfish.rc
ueventd.rc
ueventd.rk30board.rc
vendor
BusyBox v1.11.1 (2009-03-11 09:17:49 CST) multi-call binary
Copyright (C) 1998-2008 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.

Usage: busybox [function] [arguments]...
   or: function [arguments]...

	BusyBox is a multi-call binary that combines many common Unix
	utilities into a single executable.  Most people will create a
	link to busybox for each function they wish to use and BusyBox
	will act like whatever it was invoked as!

Currently defined functions:
	[, [[, addgroup, adduser, adjtimex, ar, arp, arping, ash, awk, basename, brctl, bunzip2,
	bzcat, bzip2, cal, cat, catv, chat, chattr, chgrp, chmod, chown, chpasswd, chpst, chroot,
	chrt, chvt, cksum, clear, cmp, comm, cp, cpio, crond, crontab, cryptpw, cttyhack, cut,
	date, dc, dd, deallocvt, delgroup, deluser, depmod, df, dhcprelay, diff, dirname, dmesg,
	dnsd, dos2unix, du, dumpkmap, dumpleases, echo, ed, egrep, eject, env, envdir, envuidgid,
	ether-wake, expand, expr, fakeidentd, false, fbset, fbsplash, fdflush, fdformat, fdisk,
	fetchmail, fgrep, find, fold, free, freeramdisk, fsck, fsck.minix, ftpget, ftpput, fuser,
	getopt, getty, grep, gunzip, gzip, halt, hdparm, head, hexdump, hostid, hostname, httpd,
	hush, hwclock, id, ifconfig, ifdown, ifenslave, ifup, inetd, init, inotifyd, insmod, install,
	ip, ipaddr, ipcalc, ipcrm, ipcs, iplink, iproute, iprule, iptunnel, kbd_mode, kill, killall,
	killall5, klogd, lash, last, length, less, linux32, linux64, linuxrc, ln, loadfont, loadkmap,
	logger, login, logname, logread, losetup, lpd, lpq, lpr, ls, lsattr, lsmod, lzmacat, makedevs,
	man, md5sum, mdev, mesg, microcom, mkdir, mkfifo, mkfs.minix, mknod, mkswap, mktemp, modprobe,
	more, mount, mountpoint, msh, mt, mv, nameif, nc, netstat, nice, nmeter, nohup, nslookup,
	od, openvt, passwd, patch, pgrep, pidof, ping, ping6, pipe_progress, pivot_root, pkill,
	poweroff, printenv, printf, ps, pscan, pwd, raidautorun, rdate, readahead, readlink, readprofile,
	realpath, reboot, renice, reset, resize, rm, rmdir, rmmod, route, rpm, rpm2cpio, rtcwake,
	run-parts, runlevel, runsv, runsvdir, rx, script, sed, sendmail, seq, setarch, setconsole,
	setkeycodes, setlogcons, setsid, setuidgid, sh, sha1sum, slattach, sleep, softlimit, sort,
	split, start-stop-daemon, stat, strings, stty, su, sulogin, sum, sv, svlogd, swapoff,
	swapon, switch_root, sync, sysctl, syslogd, tac, tail, tar, taskset, tcpsvd, tee, telnet,
	telnetd, test, tftp, tftpd, time, top, touch, tr, traceroute, true, tty, ttysize, udhcpc,
	udhcpd, udpsvd, umount, uname, uncompress, unexpand, uniq, unix2dos, unlzma, unzip, uptime,
	usleep, uudecode, uuencode, vconfig, vi, vlock, watch, watchdog, wc, wget, which, who,
	whoami, xargs, yes, zcat, zcip

USER     PID   PPID  VSIZE  RSS     WCHAN    PC         NAME
root      1     0     548    412   ffffffff 00000000 S /init
root      2     0     0      0     ffffffff 00000000 S kthreadd
root      3     2     0      0     ffffffff 00000000 S ksoftirqd/0
root      4     2     0      0     ffffffff 00000000 S kworker/0:0
root      6     2     0      0     ffffffff 00000000 S migration/0
root      7     2     0      0     ffffffff 00000000 S migration/1
root      8     2     0      0     ffffffff 00000000 S kworker/1:0
root      9     2     0      0     ffffffff 00000000 S ksoftirqd/1
root      10    2     0      0     ffffffff 00000000 S migration/2
root      12    2     0      0     ffffffff 00000000 S ksoftirqd/2
root      13    2     0      0     ffffffff 00000000 S migration/3
root      15    2     0      0     ffffffff 00000000 S ksoftirqd/3
root      16    2     0      0     ffffffff 00000000 S khelper
root      17    2     0      0     ffffffff 00000000 S suspend_sys_syn
root      18    2     0      0     ffffffff 00000000 S suspend
root      19    2     0      0     ffffffff 00000000 S kconsole
root      20    2     0      0     ffffffff 00000000 S sync_supers
root      21    2     0      0     ffffffff 00000000 S bdi-default
root      22    2     0      0     ffffffff 00000000 S kblockd
root      23    2     0      0     ffffffff 00000000 S khubd
root      24    2     0      0     ffffffff 00000000 S irq/58-rk30-adc
root      25    2     0      0     ffffffff 00000000 S kworker/0:1
root      26    2     0      0     ffffffff 00000000 S cfg80211
root      27    2     0      0     ffffffff 00000000 S fb-vsync
root      28    2     0      0     ffffffff 00000000 S fb-vsync
root      29    2     0      0     ffffffff 00000000 S rk_battery
root      30    2     0      0     ffffffff 00000000 S cfinteractive
root      32    2     0      0     ffffffff 00000000 S rk3188_cpufreqd
root      33    2     0      0     ffffffff 00000000 S kswapd0
root      34    2     0      0     ffffffff 00000000 S fsnotify_mark
root      35    2     0      0     ffffffff 00000000 S crypto
root      48    2     0      0     ffffffff 00000000 S irq/95-rga
root      55    2     0      0     ffffffff 00000000 S f_mtp
root      56    2     0      0     ffffffff 00000000 S file-storage
root      59    2     0      0     ffffffff 00000000 S ft5606_0x74_ts
root      60    2     0      0     ffffffff 00000000 S binder
root      62    2     0      0     ffffffff 00000000 S kworker/u:3
root      63    2     0      0     ffffffff 00000000 S krfcommd
root      64    2     0      0     ffffffff 00000000 S hdmi
root      65    2     0      0     ffffffff 00000000 S irq/254-2-004c
root      67    2     0      0     ffffffff 00000000 S ddrfreqd
root      68    2     0      0     ffffffff 00000000 S rk_cam_wkque_ci
root      69    1     356    4     ffffffff 00000000 S /sbin/ueventd
root      75    2     0      0     ffffffff 00000000 S rknand_buffer
root      76    2     0      0     ffffffff 00000000 S mtdblock0
root      77    2     0      0     ffffffff 00000000 S mtdblock1
root      78    2     0      0     ffffffff 00000000 S mtdblock2
root      79    2     0      0     ffffffff 00000000 S mtdblock3
root      80    2     0      0     ffffffff 00000000 S mtdblock4
root      81    2     0      0     ffffffff 00000000 S mtdblock5
root      82    2     0      0     ffffffff 00000000 S mtdblock6
root      83    2     0      0     ffffffff 00000000 S mtdblock7
root      84    2     0      0     ffffffff 00000000 S mtdblock8
root      85    2     0      0     ffffffff 00000000 S mtdblock9
root      89    2     0      0     ffffffff 00000000 S jbd2/mtdblock7-
root      90    2     0      0     ffffffff 00000000 S ext4-dio-unwrit
root      92    2     0      0     ffffffff 00000000 S jbd2/mtdblock9-
root      93    2     0      0     ffffffff 00000000 S ext4-dio-unwrit
root      95    2     0      0     ffffffff 00000000 S jbd2/mtdblock5-
root      96    2     0      0     ffffffff 00000000 S ext4-dio-unwrit
root      97    2     0      0     ffffffff 00000000 S mali_freq_workq
shell     98    1     824    132   ffffffff 00000000 S /system/bin/sh
system    99    1     892    268   ffffffff 00000000 S /system/bin/servicemanager
root      100   1     4068   424   ffffffff 00000000 S /system/bin/vold
root      101   1     10228  712   ffffffff 00000000 S /system/bin/netd
root      102   1     936    128   ffffffff 00000000 S /system/bin/debuggerd
system    103   1     101256 7320  ffffffff 00000000 S /system/bin/surfaceflinger
root      104   1     640620 17132 ffffffff 00000000 S zygote
drm       105   1     13224  2996  ffffffff 00000000 S /system/bin/drmserver
media     106   1     64452  17568 ffffffff 00000000 S /system/bin/mediaserver
install   107   1     924    376   ffffffff 00000000 S /system/bin/installd
keystore  109   1     1832   536   ffffffff 00000000 S /system/bin/keystore
media_rw  111   1     2320   620   ffffffff 00000000 S /system/bin/sdcard
root      112   1     9320   1056  ffffffff 00000000 S /system/bin/glgps
root      115   2     0      0     ffffffff 00000000 S irq/42-vdpu
root      116   2     0      0     ffffffff 00000000 S irq/41-vepu
root      131   2     0      0     ffffffff 00000000 S flush-31:9
system    376   104   765464 51744 ffffffff 00000000 S system_server
u0_a29    565   104   713064 45892 ffffffff 00000000 S com.android.systemui
root      581   2     0      0     ffffffff 00000000 S dhd_cfg80211_ev
root      583   2     0      0     ffffffff 00000000 S dhd_watchdog
root      584   2     0      0     ffffffff 00000000 S dhd_dpc
root      585   2     0      0     ffffffff 00000000 S dhd_sysioc
wifi      615   1     2724   924   ffffffff 00000000 S /system/bin/wpa_supplicant
u0_a38    630   104   704676 28844 ffffffff 00000000 R com.google.android.inputmethod.latin
u0_a42    647   104   647960 14192 ffffffff 00000000 S com.android.rk.mediafloat
radio     661   104   659636 16876 ffffffff 00000000 S com.android.phone
system    667   104   647900 14116 ffffffff 00000000 S com.keenhi.helper
system    685   104   672164 21348 ffffffff 00000000 S hudl.appupdater
system    701   104   648024 14452 ffffffff 00000000 S hudl.setup
u0_a2     711   104   654444 17612 ffffffff 00000000 S hudl.devicemonitor
u0_a36    727   104   655228 15792 ffffffff 00000000 S system
u0_a4     808   104   675028 17292 ffffffff 00000000 S com.google.process.location
u0_a74    822   104   647908 14428 ffffffff 00000000 S com.android.location.fused
u0_a3     836   104   663200 20164 ffffffff 00000000 S android.process.media
u0_a4     855   104   690860 21032 ffffffff 00000000 S com.google.process.gapps
u0_a15    870   104   647884 14232 ffffffff 00000000 S com.android.smspush
u0_a39    925   104   666600 23516 ffffffff 00000000 S com.google.android.apps.currents
dhcp      995   1     984    300   ffffffff 00000000 S /system/bin/dhcpcd
u0_a22    1114  104   731120 69856 ffffffff 00000000 S com.android.vending
u0_a26    1522  104   678272 20152 ffffffff 00000000 S com.google.android.music:main
u0_a8     2218  104   753620 40968 ffffffff 00000000 S com.android.launcher
root      2729  2     0      0     ffffffff 00000000 S kworker/3:1
root      3858  2     0      0     ffffffff 00000000 S kworker/2:1
root      3985  2     0      0     ffffffff 00000000 S kworker/0:2
u0_a4     4547  104   763316 20788 ffffffff 00000000 S com.google.android.gms
root      4613  2     0      0     ffffffff 00000000 S kworker/u:2
root      4755  2     0      0     ffffffff 00000000 S kworker/1:1
system    4865  104   665372 29420 ffffffff 00000000 S com.android.settings
root      4977  2     0      0     ffffffff 00000000 S kworker/3:0
u0_a4     5123  104   663660 19236 ffffffff 00000000 S com.google.android.gsf.login
u0_a83    5137  104   738160 108652 ffffffff 00000000 S com.channel4.ondemand
root      5152  2     0      0     ffffffff 00000000 S kworker/2:0
u0_a81    5206  104   669764 30332 ffffffff 00000000 S com.estrongs.android.pop
u0_a81    5259  5206  1808   156   ffffffff 00000000 S /data/data/com.estrongs.android.pop/files/libestool2.so
root      5312  2     0      0     ffffffff 00000000 S kworker/u:1
u0_a84    5335  104   734992 80732 ffffffff 00000000 S org.adblockplus.android
u0_a84    5366  5335  0      0     ffffffff 00000000 Z Thread-409
u0_a29    5464  104   679876 40436 ffffffff 00000000 S com.android.systemui:screenshot
u0_a43    5508  104   698612 37724 ffffffff 00000000 S com.google.android.googlequicksearchbox
u0_a12    5524  104   649240 16380 ffffffff 00000000 S com.google.android.partnersetup
root      5644  2     0      0     ffffffff 00000000 S kworker/1:2
u0_a77    5661  104   647900 15644 ffffffff 00000000 S com.android.defcontainer
u0_a1     5675  104   657212 21888 ffffffff 00000000 S android.process.acore
u0_a59    5695  104   653388 19828 ffffffff 00000000 S com.google.android.gallery3d
u0_a64    5710  104   666160 29176 ffffffff 00000000 S com.google.android.apps.plus
u0_a85    5723  104   669996 25188 ffffffff 00000000 R jackpal.androidterm
u0_a68    5743  104   648008 15848 ffffffff 00000000 S com.android.musicfx
u0_a85    5762  5723  828    492   c057dba4 4003309c S /system/bin/sh
root      5969  2     0      0     ffffffff 00000000 S kworker/u:0
root      6060  2     0      0     ffffffff 00000000 S kworker/2:2
root      6104  2     0      0     ffffffff 00000000 S kworker/0:3
u0_a85    6140  5762  1152   228   00000000 400374a0 R ps
Edited by glossywhite
0

Share this post


Link to post
Share on other sites

arbitrary dmesg poll:

 

                                                                     
                                                                     
                                                                     
                                             
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.0.36+ ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Sep 23 02:05:55 BST 2013
<4>[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: RK30board
<4>[    0.000000] LCD=1
<6>[    0.000000] memory reserve: Memory(base:0x79800000 size:80M) reserved for <ion>
<6>[    0.000000] memory reserve: Memory(base:0x78800000 size:16M) reserved for <fb0 buf>
<6>[    0.000000] memory reserve: Memory(base:0x77800000 size:16M) reserved for <ipp buf>
<6>[    0.000000] memory reserve: Memory(base:0x76800000 size:16M) reserved for <fb2 buf>
<6>[    0.000000] memory reserve: Memory(base:0x76200000 size:6M) reserved for <camera_ipp_mem>
<6>[    0.000000] memory reserve: Total reserved 134M
<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
<6>[    0.000000] bootconsole [earlycon0] enabled
<4>[    0.000000] CPU SRAM: copied sram code from c0c56000 to fef00100 - fef02218
<4>[    0.000000] CPU SRAM: copied sram data from c0c58118 to fef02218 - fef029a4
<4>[    0.000000] sram_log:      4q ?&     :     4q ?)     !?, # 0q    *!  ! 3q   @      3q 
<4>[    0.000000] CLKDATA_MSG: pll_flag = 0x00
<6>[    0.000000] L310 cache controller enabled
<6>[    0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
<4>[    0.000000] DDR DEBUG: version 1.00 20130814 
<4>[    0.000000] DDR DEBUG: fix 2cs bug
<4>[    0.000000] DDR DEBUG: DDR3 Device
<4>[    0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
<4>[    0.000000] DDR DEBUG: init success!!! freq=300MHz
<4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[    0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
<4>[    0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
<4>[    0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
<4>[    0.000000] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200)
<7>[    0.000000] On node 0 totalpages: 227840
<7>[    0.000000] free_area_init_node: node 0, pgdat c0c53b80, node_mem_map c16ff000
<7>[    0.000000]   Normal zone: 976 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 89648 pages, LIFO batch:15
<7>[    0.000000]   HighMem zone: 1072 pages used for memmap
<7>[    0.000000]   HighMem zone: 136144 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @c1f08000 s6976 r8192 d13504 u32768
<7>[    0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 225792
<5>[    0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 board.ap_has_alsa=0 init=/init initrd=0x62000000,0x00120000 mtdparts=rk29xxnand:[email protected](misc),[email protected](kernel),[email protected](boot),[email protected](recovery),[email protected](backup),[email protected](cache),[email protected](kpanic),[email protected](system),[email protected](factory),[email protected](userdata) bootver=2013-05-18#1.20 firmware_ver=4.1.1
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 354MB 536MB = 890MB total
<5>[    0.000000] Memory: 882000k/882000k available, 166576k reserved, 548864K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     DMA     : 0xff600000 - 0xffe00000   (   8 MB)
<5>[    0.000000]     vmalloc : 0xdf000000 - 0xfe800000   ( 504 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xde800000   ( 488 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .init : 0xc0408000 - 0xc0575000   (1460 kB)
<5>[    0.000000]       .text : 0xc0575000 - 0xc0bd7730   (6538 kB)
<5>[    0.000000]       .data : 0xc0bd8000 - 0xc0c559e8   ( 503 kB)
<5>[    0.000000]        .bss : 0xc0c59024 - 0xc16fea70   (10903 kB)
<6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:352
<4>[    0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
<6>[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<4>[    0.000000] rk_timer: version 1.2
<6>[    0.000000] Console: colour dummy device 80x30
<6>[    0.008760] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
<6>[    0.017928] pid_max: default: 32768 minimum: 301
<6>[    0.023254] Mount-cache hash table entries: 512
<6>[    0.028811] Initializing cgroup subsys debug
<6>[    0.033591] Initializing cgroup subsys cpuacct
<6>[    0.038581] Initializing cgroup subsys freezer
<6>[    0.043566] CPU: Testing write buffer coherency: ok
<4>[    0.129818] CPU1: Booted secondary processor
<4>[    0.169807] CPU2: Booted secondary processor
<4>[    0.209806] CPU3: Booted secondary processor
<6>[    0.209837] Brought up 4 CPUs
<6>[    0.227502] SMP: Total of 4 processors activated (6525.87 BogoMIPS).
<6>[    0.234885] devtmpfs: initialized
<6>[    0.244500] NET: Registered protocol family 16
<6>[    0.249577] last_log: 0xd5d00000 map to 0xdf004000 and copy to 0xc0c5d1a0 (version 2.1)
<4>[    0.273119] KeenHigh: PowerKey IS NOT Pressed
<6>[    0.278414] lcdc0 is used as primary display device contoller!
<6>[    0.284966] lcdc1 is used as external display device controller!
<4>[    0.291780]  this is tcl battery
<6>[    0.395535] rk29sdk_wifi_bt_gpio_control_init: init finished
<6>[    0.403134] console [ttyFIQ0] enabled, bootconsole disabled
<6>[    0.412290] Registered FIQ tty driver d5c63cc0
<6>[    0.423668] bio: create slab <bio-0> at 0
<5>[    0.428079] SCSI subsystem initialized
<6>[    0.428289] usbcore: registered new interface driver usbfs
<6>[    0.428400] usbcore: registered new interface driver hub
<6>[    0.442653] usbcore: registered new device driver usb
<6>[    0.443028] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
<6>[    0.443271] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
<6>[    0.443663] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
<6>[    0.443795] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
<6>[    0.443976] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
<6>[    0.474235] rk30-adc rk30-adc: rk30 adc: driver initialized
<4>[    0.474469] timed-gpio: probe of timed-gpio failed with error -22
<6>[    0.474594] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    0.475009] Bluetooth: Core ver 2.16
<6>[    0.475075] NET: Registered protocol family 31
<6>[    0.475110] Bluetooth: HCI device and connection manager initialized
<6>[    0.475158] Bluetooth: HCI socket layer initialized
<6>[    0.475195] Bluetooth: L2CAP socket layer initialized
<6>[    0.475243] Bluetooth: SCO socket layer initialized
<4>[    0.476292] ssd2828_gpio_init: request ssd2828_vdd_mipi_PIN error
<4>[    0.476339] ssd2828_gpio_init: request ssd2828_shut_PIN error
<4>[    0.476395] Create proc entry:ssd2828 success!
<4>[    0.476487] rk fb probe ok!
<4>[    0.481336] act8846_set_init,line=17
<4>[    0.481366] act8846_set_init:g_pmic_type=3
<4>[    0.483151] act8846_set_init  act_dcdc1 =1200000mV end
<4>[    0.485024] act8846_set_init  vdd_core =1000000mV end
<4>[    0.486895] act8846_set_init  vdd_cpu =1000000mV end
<4>[    0.488766] act8846_set_init  act_dcdc4 =3000000mV end
<4>[    0.490009] act8846_set_init  act_ldo1 =1000000mV end
<4>[    0.491148] act8846_set_init  act_ldo2 =1200000mV end
<4>[    0.492918] act8846_set_init  act_ldo3 =1800000mV end
<4>[    0.494055] act8846_set_init  act_ldo4 =3300000mV end
<4>[    0.495192] act8846_set_init  act_ldo5 =3300000mV end
<4>[    0.496329] act8846_set_init  act_ldo6 =3300000mV end
<4>[    0.497465] act8846_set_init  act_ldo7 =1800000mV end
<4>[    0.499236] act8846_set_init  act_ldo8 =2800000mV end
<4>[    0.499281] act8846_set_init,line=78 END
<4>[    0.499348] i2c-core: driver [act8846] using legacy suspend method
<4>[    0.499393] i2c-core: driver [act8846] using legacy resume method
<6>[    0.499460] Switching to clocksource rk_timer
<6>[    0.499848] Switched to NOHz mode on CPU #3
<6>[    0.499861] Switched to NOHz mode on CPU #1
<6>[    0.499873] Switched to NOHz mode on CPU #2
<4>[    0.506151] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xdf0a0000
<4>[    0.506239] fb0:win0
<4>[    0.506244] fb1:win1
<4>[    0.506249] fb2:win2
<4>[    0.506386] rk3188 lcdc0 clk enable...
<6>[    0.509201] Switched to NOHz mode on CPU #0
<4>[    0.531626] rk3188 lcdc0 clk disable...
<4>[    0.571111] fb0:phy:78800000>>vir:e0000000>>len:0x1000000
<4>[    0.610599] fb0:phy:77800000>>vir:e2000000>>len:0x1000000
<4>[    0.610858] rk_fb_register>>>>>fb0
<4>[    0.611173] rk_fb_register>>>>>fb1
<4>[    0.611270] rk3188 lcdc0 clk enable...
<4>[    0.611313] lcdc0: dclk:84857142>>fps:58 load mipi dsi chip:ssd2828 id:2828
<6>[    0.693865] cfg80211: Calling CRDA to update world regulatory domain
<6>[    0.840757] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
<6>[    0.840805] lcdc0 wakeup from standby!
<6>[    0.840844] lcdc0 win0 open,atv layer:1
<4>[    0.860596] rk3188 lcdc0 probe ok!
<4>[    0.860693] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xdf0a4000
<4>[    0.860777] fb0:win0
<4>[    0.860782] fb1:win1
<4>[    0.860787] fb2:win2
<4>[    0.860866] rk3188 lcdc1 clk enable...
<4>[    0.885946] rk3188 lcdc1 clk disable...
<4>[    0.922791] fb2:phy:76800000>>vir:e4000000>>len:0x1000000
<4>[    0.923038] rk_fb_register>>>>>fb2
<4>[    0.931799] rk_fb_register>>>>>fb3
<4>[    0.931833] rk3188 lcdc1 probe ok!
<4>[    1.072808] regbase df100000 0x0, otg_phy_confed08114, 0xda8
<4>[    1.123056] cw2015 driver v1.0 probe sucess
<6>[    1.127386] NET: Registered protocol family 2
<6>[    1.127523] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[    1.127872] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
<6>[    1.128861] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[    1.130058] TCP: Hash tables configured (established 65536 bind 65536)
<6>[    1.130108] TCP reno registered
<6>[    1.130139] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    1.130196] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    1.130511] NET: Registered protocol family 1
<4>[    1.130595] lp8556_backlight_probe , line:387 .
<6>[    1.211255] Unpacking initramfs...
<6>[    1.266709] Freeing initrd memory: 1152K
<6>[    1.266825] PMU: registered new PMU device of type 0
<4>[    1.266947] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 2
<4>[    1.267001] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 2
<4>[    1.290025] rk3188 cpufreq version 2.1, suspend freq 1008 MHz
<6>[    1.290640] Loaded driver for PL330 DMAC-1 rk29-pl330
<6>[    1.290683] 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
<6>[    1.290881] Loaded driver for PL330 DMAC-2 rk29-pl330
<6>[    1.290922] 	DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
<4>[    1.318331] highmem bounce pool size: 64 pages
<6>[    1.318518] ashmem: initialized
<6>[    1.327399] fuse init (API version 7.16)
<6>[    1.332068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    1.332123] io scheduler noop registered
<6>[    1.332161] io scheduler deadline registered
<6>[    1.332229] io scheduler cfq registered (default)
<6>[    1.352509] rga: Driver loaded succesfully
<4>[    1.352743] rk_serial.c v1.3 2012-12-14
<6>[    1.352841] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
<6>[    1.539535] rk_serial rk_serial.0: membase 0xdf0bc000
<6>[    1.539604] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
<6>[    1.699536] rk_serial rk_serial.3: membase 0xdf0c0000
<6>[    1.699732] Rockchip ion module(version: 1.0) is successfully loaded
<6>[    1.701103] loop: module loaded
<6>[    1.701149] Android kernel panic handler initialized (bind=kpanic)
<6>[    1.701715] input: rk_headsetdet as /devices/platform/rk_headsetdet.0/input/input0
<6>[    1.701791] PPP generic driver version 2.4.2
<6>[    1.701917] PPP Deflate Compression module registered
<6>[    1.701946] PPP BSD Compression module registered
<6>[    1.742144] PPP MPPE Compression module registered
<6>[    1.742179] NET: Registered protocol family 24
<6>[    1.742215] tun: Universal TUN/TAP device driver, 1.6
<6>[    1.742242] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[    1.742426] usbcore: registered new interface driver asix
<6>[    1.742486] usbcore: registered new interface driver cdc_ether
<6>[    1.742537] usbcore: registered new interface driver dm9620
<6>[    1.742586] usbcore: registered new interface driver SR9700_android
<6>[    1.742637] usbcore: registered new interface driver net1080
<6>[    1.742684] usbcore: registered new interface driver cdc_subset
<6>[    1.742744] usbcore: registered new interface driver zaurus
<6>[    1.742783] cdc_ncm: 04-Aug-2011
<6>[    1.742820] usbcore: registered new interface driver cdc_ncm
<4>[    1.742851] Rockchip WiFi SYS interface (V1.00) ... 
<6>[    1.742898] Initializing USB Mass Storage driver...
<6>[    1.742949] usbcore: registered new interface driver usb-storage
<6>[    1.742981] USB Mass Storage support registered.
<6>[    1.743059] usbcore: registered new interface driver usbserial
<6>[    1.743106] USB Serial support registered for generic
<6>[    1.743153] usbcore: registered new interface driver usbserial_generic
<6>[    1.743188] usbserial: USB Serial Driver core
<6>[    1.743226] USB Serial support registered for GSM modem (1-port)
<6>[    1.743295] usbcore: registered new interface driver option
<6>[    1.743327] option: v0.7.2:USB Driver for GSM modems
<6>[    1.955081] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
<6>[    1.955121] usb20_otg usb20_otg: DWC OTG Controller
<6>[    1.955209] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
<6>[    1.955281] usb20_otg usb20_otg: irq 48, io mem 0x00000000
<6>[    1.955313] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
<6>[    1.955384] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    1.955424] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    1.955467] usb usb1: Product: DWC OTG Controller
<6>[    1.955494] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
<6>[    1.955526] usb usb1: SerialNumber: usb20_otg
<6>[    1.955805] hub 1-0:1.0: USB hub found
<6>[    1.955834] hub 1-0:1.0: 1 port detected
<6>[    2.020566] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[    2.020608] android_usb gadget: Number of LUNs=2
<6>[    2.020644]  lun0: LUN: removable file: (no medium)
<6>[    2.020671]  lun1: LUN: removable file: (no medium)
<6>[    2.020829] android_usb gadget: android_usb ready
<6>[    2.021074] input: rk29-keypad as /devices/platform/rk29-keypad/input/input1
<6>[    2.021251] usbcore: registered new interface driver xpad
<6>[    2.021306] usbcore: registered new interface driver usb_acecad
<6>[    2.021338] acecad: v3.2:USB Acecad Flair tablet driver
<6>[    2.021385] usbcore: registered new interface driver aiptek
<6>[    2.021415] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
<6>[    2.021459] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
<6>[    2.021516] usbcore: registered new interface driver gtco
<4>[    2.021544] GTCO usb driver version: 2.00.0006
<6>[    2.021586] usbcore: registered new interface driver hanwang
<6>[    2.021635] usbcore: registered new interface driver kbtab
<6>[    2.021665] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
<6>[    2.021724] usbcore: registered new interface driver wacom
<6>[    2.021754] wacom: v1.52:USB Wacom tablet driver
<6>[    2.021799] ft5x0x_ts 2-0038: ft5306_ts_probe!
<4>[    2.021824] ft5306_init_platform_hw 
<3>[    2.439851] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 2...
<3>[    2.440210] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 1...
<3>[    2.440565] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 0...
<4>[    2.440613] FT5306 I2C TEST FAILED, retry = 1, ret = -11, will again...
<3>[    2.469848] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 2...
<3>[    2.470203] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 1...
<3>[    2.470557] i2c i2c-2: No ack, Maybe slave(addr: 0x38) not exist or abnormal power-on, retry 0...
<4>[    2.470607] FT5306 I2C TEST FAILED, retry = 2, ret = -11, will again...
<4>[    2.499546] FT5306 I2C TEST OK, retry = 2, ret = -11
<4>[    2.499574] FT5306 I2C TEST ERROR! retry = 2, ret = -11
<4>[    2.499603] ft5606_exit_platform_hw
<6>[    2.499672] ft5606_0x72_ts 2-0039: ft5606_0x72_ts_probe!
<4>[    2.499702] ft5606_0x72_init_platform_hw 
<3>[    2.919854] i2c i2c-2: No ack, Maybe slave(addr: 0x39) not exist or abnormal power-on, retry 2...
<3>[    2.920212] i2c i2c-2: No ack, Maybe slave(addr: 0x39) not exist or abnormal power-on, retry 1...
<3>[    2.920567] i2c i2c-2: No ack, Maybe slave(addr: 0x39) not exist or abnormal power-on, retry 0...
<4>[    2.920614] FT5606_0X72 I2C TEST FAILED, retry = 1, ret = -11, will again...
<3>[    2.949835] i2c i2c-2: No ack, Maybe slave(addr: 0x39) not exist or abnormal power-on, retry 2...
<3>[    2.950190] i2c i2c-2: No ack, Maybe slave(addr: 0x39) not exist or abnormal power-on, retry 1...
<3>[    2.950545] i2c i2c-2: No ack, Maybe slave(addr: 0x39) not exist or abnormal power-on, retry 0...
<4>[    2.950592] FT5606_0X72 I2C TEST FAILED, retry = 2, ret = -11, will again...
<4>[    2.979526] FT5606_0X72 I2C TEST OK, retry = 2, ret = -11
<4>[    2.979558] FT5606_0X72 I2C TEST ERROR! retry = 2, ret = -11
<4>[    2.979588] ft5606_exit_platform_hw
<6>[    2.979646] ft5606_0x74_ts 2-003a: ft5606_0x74_ts_probe!
<4>[    2.979675] ft5606_0x74_init_platform_hw 
<4>[    3.399856] ft5606_0x74 I2C TEST OK, retry = 0, ret = 1
<6>[    3.399982] input: ft5606_0x74_ts-touchscreen as /devices/virtual/input/input2
<4>[    3.619999] [TSP] firmware version = 0x33
<4>[    3.996444] [FTS] upgrade failed i_ret = 2.
<6>[    8.000403] lsm303d driver: init
<6>[    8.000452] lsm303d 0-001d: probe start.
<6>[    8.000477] lsm303d 0-001d: using default plaform_data for accelerometer and magnetometer
<6>[    8.000523] lsm303d: hw init start
<6>[    8.000995] lsm303d: hw init done
<6>[    8.006238] input: lsm303dlh_acc as /devices/platform/rk30_i2c.0/i2c-0/0-001d/input/input3
<6>[    8.006425] input: lsm303dlh_mag as /devices/platform/rk30_i2c.0/i2c-0/0-001d/input/input4
<6>[    8.007220] lsm303d 0-001d: lsm303d: probed
<6>[    8.007282] l3gd20_gyr: probe start.
<6>[    8.007305] l3gd20_gyr 0-006b: polling enabled
<6>[    8.007330] l3gd20_gyr hw init
<7>[    8.008351] dev_data->pdata->gpio_int2 = -22
<6>[    8.009512] input: l3gd20_gyr as /devices/platform/rk30_i2c.0/i2c-0/0-006b/input/input5
<6>[    8.009693] l3gd20_gyr power off
<6>[    8.016927] using rtc device, rtc_hym8563, for alarms
<6>[    8.016974] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
<6>[    8.017033] i2c /dev entries driver
<6>[    8.017446] lirc_dev: IR Remote Control driver registered, major 250 
<6>[    8.017485] IR NEC protocol handler initialized
<6>[    8.017509] IR RC5(x) protocol handler initialized
<6>[    8.017535] IR RC6 protocol handler initialized
<6>[    8.017559] IR JVC protocol handler initialized
<6>[    8.017583] IR Sony protocol handler initialized
<6>[    8.017608] IR RC5 (streamzap) protocol handler initialized
<6>[    8.017638] IR LIRC bridge handler initialized
<6>[    8.017661] Linux video capture interface: v2.00
<4>[    8.017815] def_ref_volt: 1800mV, curr_ref_volt: 1800mV
<4>[    8.017845] start_charge_logo_display
<6>[    8.018088] device-mapper: uevent: version 1.0.3
<6>[    8.018271] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<6>[    8.018395] Bluetooth: HCI UART driver ver 2.2
<6>[    8.018422] Bluetooth: HCI H4 protocol initialized
<6>[    8.018448] Bluetooth: HCILL protocol initialized
<6>[    8.018475] Bluetooth: BlueSleep Mode Driver Ver 1.1
<6>[    8.018623] cpuidle: using governor ladder
<6>[    8.018649] cpuidle: using governor menu
<7>[    8.033934] mmc_rescan:1822,mmc_rescan Begin host name is [mmc0]
<7>[    8.033952] mmc_rescan:1829,find no SDMMC host name is [mmc0]
<6>[    8.034007] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21.  [sd_mmc]
<7>[    8.034163] mmc_rescan:1822,mmc_rescan Begin host name is [mmc1]
<6>[    8.034198] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21.  [sdio]
<6>[    8.034285] Skipping unavailable LED gpio -1 (button-backlight)
<6>[    8.035309] usbcore: registered new interface driver usbhid
<6>[    8.035341] usbhid: USB HID core driver
<6>[    8.035586] logger: created 256K log 'log_main'
<6>[    8.035656] logger: created 256K log 'log_events'
<6>[    8.035722] logger: created 256K log 'log_radio'
<6>[    8.035787] logger: created 256K log 'log_system'
<6>[    8.075020] asoc: ES8323 HiFi <-> rk29_i2s.1 mapping ok
<6>[    8.075320] ALSA device list:
<6>[    8.075340]   #0: RK29_ES8323
<6>[    8.075428] GACT probability NOT on
<6>[    8.075454] Mirror/redirect action on
<6>[    8.075477] u32 classifier
<6>[    8.075492]     Actions configured
<6>[    8.075513] Netfilter messages via NETLINK v0.30.
<6>[    8.075571] nf_conntrack version 0.5.0 (13799 buckets, 55196 max)
<6>[    8.075836] ctnetlink v0.93: registering with nfnetlink.
<6>[    8.075888] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    8.075925] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    8.076183] xt_time: kernel timezone is -0000
<6>[    8.076320] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    8.076438] arp_tables: (C) 2002 David S. Miller
<6>[    8.076491] TCP cubic registered
<6>[    8.076511] Initializing XFRM netlink socket
<6>[    8.076829] NET: Registered protocol family 10
<6>[    8.077335] Mobile IPv6
<6>[    8.077369] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    8.077482] IPv6 over IPv4 tunneling driver
<6>[    8.077991] NET: Registered protocol family 17
<6>[    8.078034] NET: Registered protocol family 15
<6>[    8.078220] Bluetooth: RFCOMM TTY layer initialized
<6>[    8.078275] Bluetooth: RFCOMM socket layer initialized
<6>[    8.078304] Bluetooth: RFCOMM ver 1.11
<6>[    8.078325] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    8.078355] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    8.078473] NET: Registered protocol family 35
<6>[    8.078608] [BT_RFKILL]: Enter rfkill_rk_init
<6>[    8.099641] [BT_RFKILL]: bt shut off power
<6>[    8.099669] [BT_RFKILL]: bcm4334 device registered.
<4>[    8.271988] CAT66121: Reg[0-3] = 0x[54].[49].[12].[16]
<6>[    8.350040] cat66121_hdmi 2-004c: cat66121 hdmi i2c probe ok
<6>[    8.350206] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<4>[    8.350266] rk3066b-camera version: v0.2.31  Zoom by ipp
<5>[    8.350324] Registering SWP/SWPB emulation handler
<6>[    8.350739] ddrfreq: verion 2.4 20130427
<6>[    8.350766] ddrfreq: normal 408MHz video 300MHz dualview 0MHz idle 0MHz suspend 300MHz reboot 300MHz
<6>[    8.351818] ddrfreq: change freq to 408 MHz when normal
<6>[    8.353163] rtc_hym8563 1-0051: setting system clock to 2013-10-03 00:21:23 UTC (1380759683)
<6>[    8.353446] Freeing init memory: 1460K
<4>[    8.359483] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<3>[    8.390848] init: could not open /dev/keychord
<3>[    8.391010] init: cannot open '/initlogo.rle'
<4>[    8.491764] Probe mt9t113_back success
<4>[    8.673055] gp_rknand_info = : 0xd5ef3200
<4>[    8.673124] rk30_chip_set:1 
<4>[    8.673177] request IRQ_NANDC irq , ret=0.........
<4>[    8.673211] FTL INFO:Version = 438,Date = 20130620
<4>[    8.673278] FlashCopyProgBuf1=0xc15a3000
<4>[    8.673318] ATime: 40 ns AHB: 140 timming: 1081
<4>[    8.673344] No.1 FLASH INFO:ff ff ff ff ff
<4>[    8.673366] gBootMedia = 2 gSdmmcFwPartOffset =2000!
<4>[    8.673393] CardId = 2
<4>[    8.771767] Probe bf3720_front success
<4>[    8.808709] rk29_dma_set_buffdone_fn
<4>[    8.808732] EmmcBus_khz = 48000
<4>[    8.808758] SDM_Init OK
<4>[    8.809785] SDC_SetHostBusWidth flag 1 , 2 bits
<4>[    8.809824] EmmcBus_khz = 4000 , need = 4000
<4>[    8.868058] EmmcBus_khz = 24000 , need = 36000
<4>[    8.868587] EmmcBus_khz = 96000 , need = 100000
<4>[    8.868615] SDC_SetHostBusWidth flag 3 , 8 bits
<4>[    8.868673] SdmmcInit BootCapSize: 0x400
<4>[    8.868694] gEmmcBootPart 1
<4>[    8.869084] SdmmcInit UserCapSize: 0x1d1f000
<4>[    8.869107] SdmmcInit ret = 0!
<4>[    8.869125] rknand_buffer.c version: 4.38 20121130!
<5>[    8.869245] 10 cmdlinepart partitions found on MTD device rk29xxnand
<5>[    8.869279] Creating 10 MTD partitions on "rk29xxnand":
<5>[    8.869309] 0x000000400000-0x000000800000 : "misc"
<5>[    8.870252] 0x000000800000-0x000001000000 : "kernel"
<5>[    8.871005] 0x000001000000-0x000002000000 : "boot"
<5>[    8.871705] 0x000002000000-0x000004000000 : "recovery"
<5>[    8.872410] 0x000004000000-0x000008000000 : "backup"
<5>[    8.873160] 0x000008000000-0x000028000000 : "cache"
<5>[    8.874179] 0x000028000000-0x000028400000 : "kpanic"
<6>[    8.875595] apanic: Bound to mtd partition 'kpanic'
<6>[    8.875622] apanic: No panic data available
<5>[    8.875759] 0x000028400000-0x000068400000 : "system"
<5>[    8.877093] 0x000068400000-0x00006c400000 : "factory"
<5>[    8.877861] 0x00006c400000-0x0003a3a00000 : "userdata"
<6>[    9.002225] EXT4-fs (mtdblock7): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<6>[    9.060472] EXT4-fs (mtdblock9): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<6>[    9.077412] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<4>[    9.089726] UMP: Using OS memory backend, allocation limit: 536870912
<4>[    9.089801] UMP: UMP device driver  loaded
<4>[    9.109693] Mali: Mali400 inside of rk3188!
<4>[    9.109739] Mali: mali freq table num : 6 
<4>[    9.109778] Mali: mali freq table :Mali: 132,Mali: 198,Mali: 256,Mali: 297,Mali: 396,Mali: 594,Mali: 
<4>[    9.109873] Mali: init mali clock success 
<4>[    9.116796] Mali: @@@@@@@Mali device driver loaded success@@@@@@@@
<4>[    9.126227] mirroring: Unknown symbol video_data_to_mirroring (err 0)
<4>[    9.127496] mirroring: Unknown symbol audio_data_to_mirroring (err 0)
<4>[    9.131251] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
<4>[    9.132378] ipp irq 47
<4>[    9.132817] IPP init, version rk30-ipp 1.003
<3>[    9.217934] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
<3>[    9.226875] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
<3>[    9.226950] init: cannot find '/system/bin/rild3', disabling 'ril-daemon3'
<3>[    9.332162] init: cannot find '/system/bin/chrome.sh', disabling 'chrome'
<3>[    9.332300] init: cannot find '/system/bin/akmd', disabling 'akmd'
<3>[    9.356999] VPU_SERVICE: failed on clk_get pd_video
<4>[    9.357061] vpu: power on
<6>[    9.357132] VPU_SERVICE: checking hw id 4831
<4>[    9.357629] vpu: power off...done
<6>[    9.357667] VPU_SERVICE: init success
<3>[    9.363843] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
<3>[    9.363888] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
<3>[    9.364102] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
<3>[    9.490089] android_usb: already disabled
<3>[    9.490356] android_usb: already disabled
<6>[    9.490578] mtp_bind_config
<4>[    9.597574] [rknand_sys_storage_ioctl:90] rknand_sys_storage_ioctl in
<4>[    9.597672] [rknand_sys_storage_ioctl:251] RKNAND_GET_SN_SECTOR
<4>[    9.597762] [rknand_sys_storage_ioctl:365] return ret = 0
<4>[    9.601511] [rknand_sys_storage_ioctl:90] rknand_sys_storage_ioctl in
<4>[    9.601614] [rknand_sys_storage_ioctl:103] RKNAND_GET_DRM_KEY
<4>[    9.601700] [rknand_sys_storage_ioctl:365] return ret = 0
<4>[   10.090542] rk fb use 3 buffers
<6>[   10.107494] lcdc0 win1 open,atv layer:2
<6>[   10.109562] lcdc0 win1 closed,atv layer:1
<3>[   10.685543] mt9t113 sensor_ioctl cmd(0x3) is unknown !
<3>[   10.790599] bf3720bf3720 sensor_ioctl cmd(0x3) is unknown !
<6>[   11.205020] ES8323 4-0010: es8323_off_amp 0
<6>[   15.826569] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<6>[   17.959570] DWC_OTG: ********vbus detect*********************************************
<6>[   18.144853] DWC_OTG: ********soft connect!!!*****************************************
<6>[   18.150861] DWC_OTG: USB SUSPEND
<6>[   18.283026] DWC_OTG: USB RESET
<6>[   18.355298] android_work: sent uevent USB_STATE=CONNECTED
<6>[   18.358945] DWC_OTG: USB RESET
<6>[   18.448297] android_usb gadget: high speed config #1: android
<6>[   18.448461] android_work: sent uevent USB_STATE=CONFIGURED
<6>[   18.458980] ES8323 4-0010: es8323_off_amp 1
<6>[   27.615918] request_suspend_state: awake (mem->on) at 27566390254 (2013-10-03 00:21:42.754755253 UTC)
<4>[   28.099255] wifi_set_power = 1
<4>[   28.100211] wifi_set_power = 1
<6>[   28.100263] rk29sdk_wifi_power: 1
<6>[   28.210359] acc_open
<6>[   28.210399] acc_release
<6>[   28.384685] wifi turn on power
<4>[   28.589697] wifi_set_carddetect = 1
<6>[   28.589789] rk29sdk_wifi_set_carddetect:1
<6>[   28.589878] mmc1: slot status change detected(0-1)
<6>[   28.589911] rk29_sdmmc_change_clk_div..1935..  newDiv=80, newCLK=300Khz [sdio]
<7>[   28.789737] mmc_rescan:1822,mmc_rescan Begin host name is [mmc1]
<6>[   28.834230] 
<6>[   28.834268] mmc_attach_sdio..802..  ===== Begin to identify card as SDIO-card. [mmc1]
<7>[   28.853912] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<7>[   28.856015] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<7>[   28.858136] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<7>[   28.862152] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<7>[   28.870881] mmc1: queuing unknown CIS tuple 0x80 (14 bytes)
<7>[   28.872638] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<6>[   28.962239] rk29_sdmmc_change_clk_div..1935..  newDiv=0, newCLK=48000Khz [sdio]
<6>[   28.965623] mmc1: new high speed SDIO card at address 0001
<6>[   28.967181] mmc_rescan_try_freq..1675..  ===== Initialize SDIO successfully. [mmc1]
<4>[   28.968156] alloc static buf at d5dc0000!
<4>[   28.968877] dhdsdio_probe : no mutex held. set lock
<4>[   28.969393] F1 signature read @0x18000000=0x16034334
<4>[   28.984255] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
<4>[   28.990777] wl_create_event_handler thr:20a started
<4>[   28.995279] p2p0: P2P Interface Registered
<4>[   28.995803] dhd_attach thr:20b started
<4>[   28.996444] dhd_attach thr:20d started
<4>[   28.998636] dhd_attach thr:20e started
<4>[   28.998916] wifi_get_mac_addr
<4>[   29.001234] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
<4>[   29.001346] dhdsdio_probe : the lock is released.
<4>[   29.001789] 
<4>[   29.001796] Dongle Host Driver, version 1.88.2 (r388528)
<4>[   29.001811] Compiled in drivers/net/wireless/bcmdhd on Aug 17 2013 at 22:45:42
<4>[   29.001934] =========== WLAN placed in RESET ========
<4>[   29.230734] 
<4>[   29.230767] Dongle Host Driver, version 1.88.2 (r388528)
<4>[   29.230837] Compiled in drivers/net/wireless/bcmdhd on Aug 17 2013 at 22:45:42
<4>[   29.231229] wl_android_wifi_on in
<4>[   29.231267] =========== WLAN going back to live  ========
<4>[   29.369625] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<6>[   29.688382] CFG80211-ERROR) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=fe:4d:d4:fc:6d:44
<6>[   30.820010] mtp_open
<4>[   32.444717] wl_bss_connect_done succeeded with 1c:c6:3c:2e:6d:b3
<4>[   32.524119] wl_bss_connect_done succeeded with 1c:c6:3c:2e:6d:b3
<6>[   37.599605] [BT_RFKILL]: bt shut off power
<6>[   37.629629] [BT_RFKILL]: bt turn on power
<7>[   40.109564] p2p0: no IPv6 routers present
<7>[   40.169572] wlan0: no IPv6 routers present
<6>[   42.069613] ES8323 4-0010: es8323_off_amp 0
<6>[   44.618626] binder: 771:1452 transaction failed 29189, size 604-4
<6>[   44.900811] binder: 375:434 transaction failed 29189, size 100-4
<6>[   46.799810] ES8323 4-0010: es8323_off_amp 1
<6>[   47.018976] ES8323 4-0010: es8323_off_amp 0
<6>[   55.760191] ES8323 4-0010: es8323_off_amp 1
<6>[   57.528094] ES8323 4-0010: es8323_off_amp 0
<6>[   74.444883] ES8323 4-0010: es8323_off_amp 1
<6>[   74.916414] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3
<6>[   74.942895] CFG80211-ERROR) wl_is_linkdown : 
<6>[   74.946984] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[   74.947549] Link down Reason : WLC_E_LINK
<6>[   74.947792] cfg80211: Calling CRDA to update world regulatory domain
<4>[   74.951389] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 1c:c6:3c:2e:6d:b3
<6>[   74.951478] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DEAUTH
<4>[   75.111628] wl_android_wifi_off in
<4>[   75.114139] =========== WLAN placed in RESET ========
<4>[   75.418020] net_ratelimit: 5 callbacks suppressed
<4>[   75.418095] dhdsdio_disconnect : no mutex held. set lock
<4>[   75.418360] dhd_detach thr:20e terminated OK
<4>[   75.679816] dhd_detach thr:20b terminated OK
<4>[   75.680008] dhd_detach thr:20d terminated OK
<6>[   75.839603] CFG80211-ERROR) wl_event_handler : was terminated
<4>[   75.845395] wl_destroy_event_handler thr:20a terminated OK
<4>[   75.989900] wd wakelock count:0
<4>[   75.993171] dhdsdio_disconnect : the lock is released.
<4>[   75.993563] ## wifi_remove
<4>[   75.993588] wifi_set_power = 0
<6>[   75.993612] rk29sdk_wifi_power: 0
<6>[   76.198269] wifi shut off power
<4>[   76.198303] wifi_set_carddetect = 0
<6>[   76.198347] rk29sdk_wifi_set_carddetect:0
<6>[   76.198376] mmc1: slot status change detected(1-0)
<6>[   76.198626] mmc1: card 0001 removed
<7>[   76.198713] mmc_rescan:1822,mmc_rescan Begin host name is [mmc1]
<4>[   76.199040] wifi_set_power = 0
<6>[   76.199064] rk29sdk_wifi_power: 0
<6>[   76.404007] wifi shut off power
<4>[   77.914149] wifi_set_power = 1
<4>[   77.914631] wifi_set_power = 1
<6>[   77.914687] rk29sdk_wifi_power: 1
<6>[   78.196585] wifi turn on power
<4>[   78.399569] wifi_set_carddetect = 1
<6>[   78.399606] rk29sdk_wifi_set_carddetect:1
<6>[   78.399648] mmc1: slot status change detected(0-1)
<6>[   78.399691] rk29_sdmmc_change_clk_div..1935..  newDiv=80, newCLK=300Khz [sdio]
<7>[   78.599628] mmc_rescan:1822,mmc_rescan Begin host name is [mmc1]
<6>[   78.643584] 
<6>[   78.643593] mmc_attach_sdio..802..  ===== Begin to identify card as SDIO-card. [mmc1]
<7>[   78.661273] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<7>[   78.663427] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<7>[   78.665554] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
<7>[   78.669347] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
<7>[   78.676048] mmc1: queuing unknown CIS tuple 0x80 (14 bytes)
<7>[   78.677757] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
<6>[   78.756624] rk29_sdmmc_change_clk_div..1935..  newDiv=0, newCLK=48000Khz [sdio]
<6>[   78.759973] mmc1: new high speed SDIO card at address 0001
<4>[   78.762728] 
<4>[   78.762739] Dongle Host Driver, version 1.88.2 (r388528)
<4>[   78.762759] Compiled in drivers/net/wireless/bcmdhd on Aug 17 2013 at 22:45:42
<4>[   78.764003] alloc static buf at d5dc0000!
<4>[   78.764554] dhdsdio_probe : no mutex held. set lock
<4>[   78.782112] wl_create_event_handler thr:7a3 started
<4>[   78.783971] p2p0: P2P Interface Registered
<4>[   78.784092] dhd_attach thr:7a4 started
<4>[   78.784256] dhd_attach thr:7a5 started
<4>[   78.784382] dhd_attach thr:7a6 started
<4>[   78.786211] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
<6>[   78.786334] mmc_rescan_try_freq..1675..  ===== Initialize SDIO successfully. [mmc1]
<4>[   78.786418] =========== WLAN placed in RESET ========
<4>[   78.960002] wl_android_wifi_on in
<4>[   78.960038] =========== WLAN going back to live  ========
<6>[   79.308007] CFG80211-ERROR) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=fe:4d:d4:fc:6d:44
<4>[   82.177360] wl_bss_connect_done succeeded with 1c:c6:3c:2e:6d:b3
<4>[   82.191435] wl_bss_connect_done succeeded with 1c:c6:3c:2e:6d:b3
<6>[   86.565754] ES8323 4-0010: es8323_off_amp 0
<7>[   89.779556] wlan0: no IPv6 routers present
<7>[   90.419539] p2p0: no IPv6 routers present
<6>[  100.924834] ES8323 4-0010: es8323_off_amp 1
<6>[  101.835225] ES8323 4-0010: es8323_off_amp 0
<6>[  104.862911] ES8323 4-0010: es8323_off_amp 1
<6>[  105.935016] ES8323 4-0010: es8323_off_amp 0
<6>[  108.962618] ES8323 4-0010: es8323_off_amp 1
<6>[  109.144305] ES8323 4-0010: es8323_off_amp 0
<6>[  113.308026] CFG80211-ERROR) wl_cfg80211_disconnect : Reason 3
<6>[  113.322639] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_LINK
<4>[  113.322828] link down if wlan0 may call cfg80211_disconnected. event : 16, reason=2 from 1c:c6:3c:2e:6d:b3
<6>[  113.323095] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DEAUTH
<6>[  113.328241] cfg80211: Calling CRDA to update world regulatory domain
<6>[  116.444193] ES8323 4-0010: es8323_off_amp 1
<6>[  116.943523] ES8323 4-0010: es8323_off_amp 0
<6>[  118.094123] CFG80211-ERROR) wl_is_linkdown : Link down Reason : WLC_E_DEAUTH
<6>[  118.099425] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev d36b3000 wl->escan_on 1 drv_status 0x0 e_type 69 e_states 4
<6>[  123.732854] ES8323 4-0010: es8323_off_amp 1
<6>[  123.867176] ES8323 4-0010: es8323_off_amp 0
<6>[  126.894728] ES8323 4-0010: es8323_off_amp 1
<6>[  131.795866] ES8323 4-0010: es8323_off_amp 0
<4>[  148.008393] wl_bss_connect_done succeeded with 1c:c6:3c:2e:6d:b3
<4>[  148.036372] wl_bss_connect_done succeeded with 1c:c6:3c:2e:6d:b3
<6>[  148.045791] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[  148.824822] ES8323 4-0010: es8323_off_amp 1
<6>[  151.356801] ES8323 4-0010: es8323_off_amp 0
<6>[  158.290770] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=2175 tgid=652 uid=10003
<6>[  158.836330] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=2175 tgid=652 uid=10003
<7>[  159.439651] wlan0: no IPv6 routers present
<6>[  160.307607] ES8323 4-0010: es8323_off_amp 1
<6>[  161.436099] ES8323 4-0010: es8323_off_amp 0
<6>[  165.282289] ES8323 4-0010: es8323_off_amp 1
<6>[  170.523931] ES8323 4-0010: es8323_off_amp 0
<6>[  175.547613] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=2253 tgid=652 uid=10003
<6>[  176.082286] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=2253 tgid=652 uid=10003
<6>[  177.618345] ES8323 4-0010: es8323_off_amp 1
<6>[  195.728408] ES8323 4-0010: es8323_off_amp 0
<6>[  198.756084] ES8323 4-0010: es8323_off_amp 1
<6>[  199.669999] ES8323 4-0010: es8323_off_amp 0
<6>[  202.442397] binder: 375:395 transaction failed 29189, size 144-0
<6>[  202.697745] ES8323 4-0010: es8323_off_amp 1
<6>[  222.222852] ES8323 4-0010: es8323_off_amp 0
<3>[  227.308971] init: untracked pid 2609 exited
<6>[  229.546494] ES8323 4-0010: es8323_off_amp 1
<6>[  230.671918] ES8323 4-0010: es8323_off_amp 0
<3>[  231.913417] init: untracked pid 2648 exited
<6>[  250.464157] ES8323 4-0010: es8323_off_amp 1
<6>[  254.586831] ES8323 4-0010: es8323_off_amp 0
<6>[  315.827691] ES8323 4-0010: es8323_off_amp 1
<6>[  325.426466] ES8323 4-0010: es8323_off_amp 0
<6>[  330.801540] ES8323 4-0010: es8323_off_amp 1
<6>[  340.472248] ES8323 4-0010: es8323_off_amp 0
<6>[  343.500174] ES8323 4-0010: es8323_off_amp 1
<6>[  343.836295] ES8323 4-0010: es8323_off_amp 0
<6>[  349.232290] ES8323 4-0010: es8323_off_amp 1
<6>[  349.272861] ES8323 4-0010: es8323_off_amp 0
<6>[  354.065106] ES8323 4-0010: es8323_off_amp 1
<6>[  354.755001] ES8323 4-0010: es8323_off_amp 0
<6>[  357.782795] ES8323 4-0010: es8323_off_amp 1
<6>[  358.663363] ES8323 4-0010: es8323_off_amp 0
<6>[  369.237753] ES8323 4-0010: es8323_off_amp 1
<6>[  371.005259] ES8323 4-0010: es8323_off_amp 0
<6>[  374.032974] ES8323 4-0010: es8323_off_amp 1
<6>[  390.885146] ES8323 4-0010: es8323_off_amp 0
<6>[  393.912703] ES8323 4-0010: es8323_off_amp 1
<6>[  395.560533] ES8323 4-0010: es8323_off_amp 0
<6>[  400.770834] ES8323 4-0010: es8323_off_amp 1
<6>[  518.041620] request_suspend_state: sleep (on->mem) at 517992071686 (2013-10-03 00:29:53.975612557 UTC)
<4>[  518.042253] ft5606_0x74_set_regs OK!!
<4>[  518.079583] lcd_standby...
<4>[  518.362256] net_ratelimit: 11 callbacks suppressed
<4>[  518.362312] dhd_set_suspend: force extra Suspend setting 
<4>[  518.379912] rk3188 lcdc0 clk disable...
<4>[  518.384234] dhd_get_suspend_bcn_li_dtim beacon=100 bcn_li_dtim=3 DTIM=1 Listen=10
<6>[  518.419686] ddrfreq: change auto self refresh to 1 when suspend
<6>[  518.420425] ddrfreq: change freq to 300 MHz when suspend
<6>[  676.795143] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=2969 tgid=652 uid=10003
<6>[  677.482650] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=2969 tgid=652 uid=10003
<6>[  698.992414] qtaguid: ctrl_tag(t 70 18446742978492891136 10022): insufficient priv from pid=3181 tgid=652 uid=10003
<6>[  699.555364] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3181 tgid=652 uid=10003
<6>[  728.069890] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3352 tgid=652 uid=10003
<6>[  728.646504] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3352 tgid=652 uid=10003
<6>[  733.088872] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3434 tgid=652 uid=10003
<6>[  733.683428] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3434 tgid=652 uid=10003
<6>[  756.158681] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3499 tgid=652 uid=10003
<6>[  756.761418] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3499 tgid=652 uid=10003
<4>[  767.622019] [rknand_sys_storage_ioctl:90] rknand_sys_storage_ioctl in
<4>[  767.622087] [rknand_sys_storage_ioctl:251] RKNAND_GET_SN_SECTOR
<4>[  767.622154] [rknand_sys_storage_ioctl:365] return ret = 0
<4>[  767.622591] [rknand_sys_storage_ioctl:90] rknand_sys_storage_ioctl in
<4>[  767.622649] [rknand_sys_storage_ioctl:103] RKNAND_GET_DRM_KEY
<4>[  767.622703] [rknand_sys_storage_ioctl:365] return ret = 0
<6>[  768.424134] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3601 tgid=652 uid=10003
<6>[  768.996989] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3601 tgid=652 uid=10003
<6>[  785.188728] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3665 tgid=652 uid=10003
<6>[  785.572698] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3665 tgid=652 uid=10003
<6>[  791.749119] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3730 tgid=652 uid=10003
<6>[  792.401335] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3730 tgid=652 uid=10003
<6>[  824.459052] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3838 tgid=652 uid=10003
<6>[  824.933702] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=3838 tgid=652 uid=10003
<6>[  862.427383] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3932 tgid=652 uid=10003
<6>[  863.124303] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=3932 tgid=652 uid=10003
<6>[  909.235706] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4014 tgid=652 uid=10003
<6>[  909.624404] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4014 tgid=652 uid=10003
<6>[  914.763688] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4070 tgid=652 uid=10003
<6>[  915.430432] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4070 tgid=652 uid=10003
<6>[  933.344422] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4129 tgid=652 uid=10003
<6>[  934.321278] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4129 tgid=652 uid=10003
<6>[  941.293945] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4188 tgid=652 uid=10003
<6>[  941.664889] qtaguid: ctrl_tag(t 57 18446742978492891136 10022): insufficient priv from pid=4188 tgid=652 uid=10003
<6>[  957.023383] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=4269 tgid=652 uid=10003
<6>[  958.440278] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=4269 tgid=652 uid=10003
<6>[  970.105018] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=4341 tgid=652 uid=10003
<6>[  970.639367] qtaguid: ctrl_tag(t 48 18446742978492891136 10022): insufficient priv from pid=4341 tgid=652 uid=10003
<6>[ 1485.941391] request_suspend_state: awake (mem->on) at 1485891844301 (2013-10-03 00:46:01.875385922 UTC)
<6>[ 1485.941658] ddrfreq: change auto self refresh to 0 when normal
<4>[ 1485.941901] rk3188 lcdc0 clk enable...
<6>[ 1485.943483] ddrfreq: change freq to 408 MHz when normal
<4>[ 1486.210844] rk3188 lcdc1 clk enable...
<4>[ 1486.271001] dhd_set_suspend: Remove extra suspend setting 
<4>[ 1486.280196] rk3188 lcdc1 clk disable...
<6>[ 1487.608026] ES8323 4-0010: es8323_off_amp 0
<6>[ 1491.868955] ES8323 4-0010: es8323_off_amp 1
<6>[ 1492.860564] ES8323 4-0010: es8323_off_amp 0
<6>[ 1498.233155] ES8323 4-0010: es8323_off_amp 1
<6>[ 1502.351141] ES8323 4-0010: es8323_off_amp 0
<6>[ 1506.145754] ES8323 4-0010: es8323_off_amp 1
<6>[ 1510.790682] ES8323 4-0010: es8323_off_amp 0
<6>[ 1524.847780] ES8323 4-0010: es8323_off_amp 1
<6>[ 1524.952117] ES8323 4-0010: es8323_off_amp 0
<6>[ 1543.328864] ES8323 4-0010: es8323_off_amp 1
<6>[ 1556.342176] ES8323 4-0010: es8323_off_amp 0
<6>[ 1562.273111] ES8323 4-0010: es8323_off_amp 1
<6>[ 1565.081540] ES8323 4-0010: es8323_off_amp 0
<6>[ 1568.109019] ES8323 4-0010: es8323_off_amp 1
<6>[ 1584.278375] ES8323 4-0010: es8323_off_amp 0
Edited by glossywhite
0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

MoDaCo is part of the MoDaCo.network, © Paul O'Brien 2002-2016. MoDaCo uses IntelliTxt technology.