Guest dalyer Posted July 14, 2014 Report Share Posted July 14, 2014 I've found only Coolpad MTP Device in Device manager, so I think that drivers aren't installed. Because every time I conect phone to pc, I use the 1st option to install drivers but after some steps, I see an errror message. so where can I find coolpad drivers for Windows Xp? thanks I used the Coolpad_driver.exe from here and had no problems (Win7SP1 64 bit) http://forum.xda-developers.com/showthread.php?t=2785891 Link to comment Share on other sites More sharing options...
Guest corvettec3 Posted July 15, 2014 Report Share Posted July 15, 2014 Damn :huh: can you charge on google drive this last version of 036 v4 by atx (revising ATX settings remove magic interesting list of animation) ? thanks Link to comment Share on other sites More sharing options...
Guest borsosg Posted July 15, 2014 Report Share Posted July 15, 2014 You can download 036 atx from my drive: https://drive.google.com/folderview?id=0B36Ay7pVtck6UE4yNEp1Vmp5OEk&usp=sharing Link to comment Share on other sites More sharing options...
Guest corvettec3 Posted July 15, 2014 Report Share Posted July 15, 2014 Problem with vroot I try to do root with vroot 1.7.3 downloaded by official site, but after that phone reboot automatically, phone opens camera and on the display there is written "Full restoration" . "if the restore data is encrypted, please enter the password below. In the low area of the screen there are 2 options: "do not restore" and "restore my data". On vroot program on pc start countdown with the same picture that there is on my phone. I try to don't make any action but vroot doesn't complete root. P.s. My pc recognize my phone on device manager. Please help me. Thanks Link to comment Share on other sites More sharing options...
Guest borsosg Posted July 15, 2014 Report Share Posted July 15, 2014 Why want to make root everybody with Vroot??? I shared a zip file what install from CWM or TWRP the phone will be root.... the link again: https://drive.google.com/folderview?id=0B36Ay7pVtck6alBkdEF0YmdYaGc&usp=sharing Link to comment Share on other sites More sharing options...
Guest johnickz Posted July 15, 2014 Report Share Posted July 15, 2014 (edited) Guys I noticed camera upgrade in 036 by ATX! Did you notice that too?? What you propose 036 original or 036 by ATX or whats the major differences? Can we put the camera libs and program of 036 in a MIUI out there? Edited July 15, 2014 by johnickz Link to comment Share on other sites More sharing options...
Guest dakok Posted July 15, 2014 Report Share Posted July 15, 2014 (edited) I moved to Baidu 52. :D Corvette, do you read instructions? You should install Vroot 1.7.7 or newer release. Borsosg, for cwm you need mobile uncle for which you need root. You can't have a simple root solution for first time root... Edited July 15, 2014 by dakok Link to comment Share on other sites More sharing options...
Guest borsosg Posted July 15, 2014 Report Share Posted July 15, 2014 You can use this zip from stock recovery too. Link to comment Share on other sites More sharing options...
Guest corvettec3 Posted July 15, 2014 Report Share Posted July 15, 2014 (edited) Hi, I've made root.where should I install mobileuncletools: on phone storage or on sd? In mobileuncle tools what is the exact recovery option name to see and install the file recovery.img (that I put on sd card)? thanks Edited July 15, 2014 by corvettec3 Link to comment Share on other sites More sharing options...
Guest borsosg Posted July 15, 2014 Report Share Posted July 15, 2014 In Mobile UncleTools choose recovery update and choose recovery.img from SD root. Link to comment Share on other sites More sharing options...
Guest corvettec3 Posted July 15, 2014 Report Share Posted July 15, 2014 In Mobile UncleTools choose recovery update and choose recovery.img from SD root. thanks. Where should I install mobileuncletools: on phone storage or on sd? Link to comment Share on other sites More sharing options...
Guest borsosg Posted July 15, 2014 Report Share Posted July 15, 2014 (edited) The Mobile UncleTools install to phone storage, recovery.img copy to SD root. Edited July 15, 2014 by borsosg Link to comment Share on other sites More sharing options...
Guest dakok Posted July 15, 2014 Report Share Posted July 15, 2014 (edited) You can use this zip from stock recovery too. When I press vol- and power phone just goes into boot... No stock recovery. EDIT: VeseliD commented about possibility of losing his IMEI with 036 restore. What about that? Edited July 15, 2014 by dakok Link to comment Share on other sites More sharing options...
Guest borsosg Posted July 15, 2014 Report Share Posted July 15, 2014 (edited) When I press vol- and power phone just goes into boot... No stock recovery. EDIT: VeseliD commented about possibility of losing his IMEI with 036 restore. What about that? The phone (you can buy it from anywhere) arrive with custom recovery (usually chinese CWM). So the stock recowery is everytime CWM... You can active it with vol+ and power button (as you know). The chinese recovery looks like this: https://drive.google.com/folderview?id=0B2BIusU_K5QBLUtOTUxkdXZPekU&usp=sharing you can use it without chinese konwledge.... The other thing: I dont think so that my 036 backup about anybody loose his IMEI. I maked this backup from virgin system without Nvram. If sombody afraid of loose his IMEI, before restore my backup, make an IMEI backup from Mobile Uncle tools. I think in any case it is important to make an Imei backup, and a nandroid backup before flash any new ROM, or do a restore from an other backup... In Hungary many peoples used my backup for update his system, and nobody comlained about loosing his Imei... Edited July 15, 2014 by borsosg Link to comment Share on other sites More sharing options...
Guest dakok Posted July 15, 2014 Report Share Posted July 15, 2014 (edited) Ok, IMEI subject is cleared out now. :) Now, back to stock and custom recoveries. Phone does not have to have a chinese custom recovery. My knowledge about recoveries is like this. There is a FACTORY or STOCK recovery in every phone that is usually activated by vol- and power button. It is easily recognised by android figure on its back and a very basic recovery menu. China sellers usualy put a chinese custom recovery on - for flashing multianguage roms - in your case it is custom recovery made by Mobileuncle team Short guide from XDA stated that you flash recovery.zip from STOCK recovery - so I understood that it is possible to do it from a STOCK (factory) recovery. It should state that it is actually a custom one :) Edited July 15, 2014 by dakok Link to comment Share on other sites More sharing options...
Guest baniko Posted July 15, 2014 Report Share Posted July 15, 2014 (edited) I moved to Baidu 52. :D... I have try it also. The first boot is OK, but, when i make restart, the phone became stuck in one cycle between the baidu logo and the lockscreen. No matter if i make again wipe cache etc. The reboot from recovery is OK but at the normal reboot again the same problem. The same has happened with the 51 also. Edited July 15, 2014 by baniko Link to comment Share on other sites More sharing options...
Guest corvettec3 Posted July 15, 2014 Report Share Posted July 15, 2014 (edited) hi, I've just installed 029 official version and I've tried to install update 036 by wireless update but it is failed, probably because on my phone there is cwm. Now I've downloaded twrp (recovery.img). I have to put it on sd card or in a sd card directory? And after that what I have to do? thanks ps. now my phone is again unroot, it hasn't playstore,gmail,google maps even if I have installed gapps by cwm. Let me know also for that. Edited July 16, 2014 by corvettec3 Link to comment Share on other sites More sharing options...
Guest dakok Posted July 16, 2014 Report Share Posted July 16, 2014 vbaniko I can make reboot with Baidu 52 without a problem. How did you install it? Which recovery? Like this? - Download zip file (rom) and Gapps and transfer that to SDcard- Turn on debugging on your phone, turn off quick boot, turn off phone (some folks remove battery now:))- Press vol. up and power button together for 10 seconds.- You are in CWM now (probably)- Wipe data/factory reset, wipe cache partition- Mounts and storage: Format System, Cache, Data. Go back- Advanced: Wipe Dalvik cache, Reboot recovery- Install zip from SDcard -> choose zip -> your rom (zip)- Install zip from SDcard -> choose zip -> gapps for 4.1 or 4.2 (zip)- Reboot to systemLeave your phone now for 5 minutes, let it take a breath. Sometimes it would be good to delete .android_secure Android LOSTDIR from (external) SD card before flashing @corvettec3 You have a detailed instructions on the first page. Driver->root->MobileUncle->CWM/TWRP->backup in CWM/TWRP->Gooagle aplications (gapps) You put recovery.img in the SD card root (not in a map) Link to comment Share on other sites More sharing options...
Guest dakok Posted July 16, 2014 Report Share Posted July 16, 2014 New releases for today: CoolLife UI 036 Lite v5 Baidu ROM 52 CoolLife UI 036 (Anzhi forum) Link to comment Share on other sites More sharing options...
Guest corvettec3 Posted July 16, 2014 Report Share Posted July 16, 2014 @dakok yesterday I made root, I installed gapps with cwm. After I installed 029 official rom following your instructions.After that phone asked me to upgrade to 036. But it failed. Now my phone is unroot. First of all I have to make root with vroot or I have to reinstall gapps with cwm? P.S. In my sd card I have Backup in directory Clockworkmod. I have put recovery.img (trwp) in no directory on sd card. Link to comment Share on other sites More sharing options...
Guest dakok Posted July 16, 2014 Report Share Posted July 16, 2014 It doesn't matter. You may flash gapps first if you want to. Link to comment Share on other sites More sharing options...
Guest corvettec3 Posted July 16, 2014 Report Share Posted July 16, 2014 It doesn't matter. You may flash gapps first if you want to. to make upgrade to 036, first of all I have to re-make root with vroot? Link to comment Share on other sites More sharing options...
Guest dakok Posted July 16, 2014 Report Share Posted July 16, 2014 (edited) You mainly need root for the first time recovery and gapps installation. If you have cwm or twrp, you can install root later Edited July 16, 2014 by dakok Link to comment Share on other sites More sharing options...
Guest Robi4ok Posted July 16, 2014 Report Share Posted July 16, 2014 Tried 036 version by borsosg. Now i have rooted 034 official version, all my installed apps restored, data usage is working fine. Hope OTA upgrade is also will work. Thanks to borsosg for his backup. Link to comment Share on other sites More sharing options...
Guest jobmarva Posted July 16, 2014 Report Share Posted July 16, 2014 Help me root my huawei mediapad 7 youth please people Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now