nontha

PLEASE HELP . TOUCHSCREEN NOT WORKING .

Recommended Posts

nontha    0

My Huawei G300 mobile got wet in the rain a few months before . Its touchscreen is not working . I went to a vendor and replaced the touchscreen with a new one . It doesnt work . The vendor told me there must be an issue in my phone's motherboard or it could be that the port or female pin of digitzer in motherboard is not working  . So he said no digitizer will ever work on the phone . My phone's lcd display and the rest is working . I need to access my phone, so that i can write down in some book, all the notes in the MEMO app . I am using STOCK android version . I have never done "rooting" . As far as I know , my phone doesnt support USB OTG, so as to control with USB mouse . Even if it supports that , there is no use as I think I didnt enable USB debugging . What are my options ? I am also trying to see if USB debugging is enabled or disabled . Right now , I have installed ADB on my laptop, to use Android Control or Vysor . And i am going to install Vysor in Google Chrome in my lap . And i will check and see if it work , but I am quite sure it wont cause i havent enabled USB debugging , i think . If there was someway I could get USB debugging enabled and + I am somehow able to press "Ok" in the USB debugging prompt of"Should Android connect to laptop of this address ................" which comes when i connect mobile to laptop , i will be able to manage . Please advise . 

Share this post


Link to post
Share on other sites
gsf600y    4

does Memo save the data onto the sdcard?  can you see any Memo related directories when connecting the phone to your laptop using USB?

Share this post


Link to post
Share on other sites
nontha    0

Sorry for the delay . I cant access internal storage in my laptop because I cant press "Turn on USB Storage" option in my mobile phone, which comes when I connect mobile via usb to laptop . However since my Touchscreen is not working, I cant press this "Turn on USB Storage" . I am using Android 2.2 or 2.3 (Stock) .  I can access sd card however by mounting it in a different mobile . But the memo files are not there in sd card . I have tried this before . The memo app is a stock app . Thats why i think it doesnt have any visible directories . Also , even if I am able to access that , the files wont probably be able to be deciphered using software .

CAM00026.jpg

Share this post


Link to post
Share on other sites
nontha    0

I can access android Recovery screen by pressing Volume Up + Power On button . In there, there is an option "Apply update from sd card" .Is it possible to run any files which enable USB debugging using that option ? I read somehere that I could flash CyanogenMod Recovery Rom using that option Or upload ADB shell command files, with which I can enable USB debugging. I am unfamiliar with these operations . Is it possible ? 

CAM00029.jpg

Share this post


Link to post
Share on other sites
wbrambley    70

Is your boot loader unlocked? If not unlock it using fastboot mode and then flash custom recovery. I suggest clockwork mod. Then you can make a full backup and hopefully extract the files you need from that.

Share this post


Link to post
Share on other sites
nontha    0

I understood the procedure to do recovery now . Thank You very much . Your post had given me a headstart to understanding mods and rooting . I have somewhat learned what those terms mean by now . . I am going to do Clockwork mod recovery if my initial method doesnt work . 

My initial method : I have one option to enable USB debugging , a procedure which doesnt require a custom ROM . I might be able to do this with the stock ROM itself and also the data may not be wiped . it involves flashing the Stock ROM with just the difference that the system settings are edited in a notepad to enable USB debuggin to be on . But since my touchscreen is not working , I cant find out the exact stock ROM version I am using and also cant know the baseband version . I have never rooted . But still I dont know whether the android version is 2.2. or 2.3.6. Because the local Huawei shop from which I bought the phone might have upgraded it to 2.3.6 before selling it to me . Another problem is baseband version . Is baseband version dependent upon country or continent etc ? Will that be a problem ?

Could this be the correct baseband ? https://doc-0c-78-docs.googleusercontent.com/docs/securesc/ha0ro937gcuc7l7deffksulhg5h7mbp1/ts6n04e393p0b4unpnjrvaa9qe79ei8v/1473429600000/17287644221858152552/*/0B3Ry3PS2hoSVM2pQQTZscVJ5VVk?e=download

Share this post


Link to post
Share on other sites
nontha    0
Quote
22 hours ago, wbrambley said:

Is your boot loader unlocked? If not unlock it using fastboot mode and then flash custom recovery. I suggest clockwork mod. Then you can make a full backup and hopefully extract the files you need from that.

 If I am flashing the stock rom or official rom , I dont need to unlock bootloader and I dont need to root also , isnt it ? Its when i am flashing custom rom for the 1st time , i have to unlock the bootloader first and then root the phone ? Or is it the other way round - rooting and then unlocking ? What is the difference between rooting and unlocking bootloader ?

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


MoDaCo is part of the MoDaCo.network, © Paul O'Brien 2002-2016. MoDaCo uses IntelliTxt technology.