Guest AlbionCat Posted February 8, 2004 Report Share Posted February 8, 2004 Maybe this can help some of you who might be having a few fun and games with bluetooth car kits / headsets and connecting them to the E200. Albion >:> SPV E200 & Plug and Go 4 Pama Bluetooth Car Kit 1. Switch on PlugNGo Unit with the switch on the side [blue light will flash once] 2. Press the RED handset button for 2-3 secs and wait for the beep and blue light will flash slowly. 3. Press the RED handset button AGAIN for 2-3 secs and wait for the beep and blue light will flash quickly. 4. Go to settings on E200 and select Bluetooth. Change mode to “Discoverable” press DONE. 5. Reselect BLUETOOTH and press MENU then 1- BONDED DEVICES 6. Press MENU and select 1-NEW. 7. Press ADD when PAMA 8TB appears enter pin 8888 and press DONE. 8. A message should appear as follows:- “This Bluetooth device supports headset profile – would you like to set it as your Bluetooth headset YES / NO” – select YES The Bluetooth symbol will appear on the toolbar, however the headset icon ONLY appears when there is a call in progress. There is no other indication that you are “paired” with your device until a call comes in. Despite the Headset Icon appearing, I can’t make the phone auto answer the call. You still have to press the button on either the unit or the phone. The Pama PlugNGo does not seem to respond to “ending” the call via the RED button. You either have to wait for the other caller to hang up or press the RED button on the handset. Link to comment Share on other sites More sharing options...
Guest Will Posted February 9, 2004 Report Share Posted February 9, 2004 is your headset profile set to autoanswer? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now