Jump to content

Dead MPx200


Guest News53

Recommended Posts

Guest News53

My MPx220 was interupted in the middle of updating, now I can't get it to power on. Is there any way to get it to power on or is it a lost cause?

Link to comment
Share on other sites

for the update, dont u just need to put it in modem mode?

turn it off, (well u cant turn it ON, but anyways)

hold the left key while plugging it in to the usb and then the updater will recognize it?

Link to comment
Share on other sites

  • 4 months later...
Guest xxcrashxx

im having a similar problem. i tried to upgrade to 2k5. the upgrade process was completed successfully, i disconnected the phone from the usb cable and tried to power on the phone. nothing... tried to plug it back into the comptuer in modem mode, now the phone isnt detected by the upgrade program, or the computer for that matter. i got a lil mad and threw my phone against my desk, ended up just breaking off a hinge, superglued it back on, phone opens fine, but still wont power on or go into modem mode at all. anyone know of a site that will possaibly fix this???

Link to comment
Share on other sites

Guest awarner [MVP]

That's the fuin of playing with ilegal roms, chances are you have a nice paperweight.

The wm5 rom you have may be corrupted or has been hacked badly.

I have seen phone killer roms before so your phone would not be the first.

Link to comment
Share on other sites

  • 4 weeks later...
That's the fuin of playing with ilegal roms, chances are you have a nice paperweight.

The wm5 rom you have may be corrupted or has been hacked badly.

I have seen phone killer roms before so your phone would not be the first.

<{POST_SNAPBACK}>

There is a working solution for MPX200s, which appear to be dead after flashing

on the german site mobiljoe.de .

Here are the instructions for the guys who don't speak german:

1. Remove the battery

2. Press the "Left Key" and hold it while doing the next steps

3. Plug in the USB cable

4. Insert the battery (still pressing the left key)

5. The Phone should be recognizes by Windows

Now you can reflash the phone again :)

Link to comment
Share on other sites

  • 6 months later...
Guest FIREY JACK
There is a working solution for MPX200s, which appear to be dead after flashing

on the german site mobiljoe.de .

Here are the instructions for the guys who don't speak german:

1. Remove the battery

2. Press the "Left Key" and hold it while doing the next steps

3. Plug in the USB cable

4. Insert the battery (still pressing the left key)

5. The Phone should be recognizes by Windows

Now you can reflash the phone again :D

I know this is an old post but it saved me.. I was in the middle of flashing wm05 and part 2 did not get a chance to complete and the phone was dead.. tried all the little tricks to try to get the phone to be detected but no luck..until I found your post.. thanks for posting this!!!!!

Link to comment
Share on other sites

  • 4 years later...
I know this is an old post but it saved me.. I was in the middle of flashing wm05 and part 2 did not get a chance to complete and the phone was dead.. tried all the little tricks to try to get the phone to be detected but no luck..until I found your post.. thanks for posting this!!!!!

YES! YOU ARE THE BEST!!! :)

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.