13 replies to this topic

[aqwarel]

hi boys, i need help...
i damaged my power connector/ it is broken/ when i put phone to USB Cradle. i need some new power connector or some recovery tutorial...


i find on the net scheme ... its very difficulty create new connector because place pins between cca 1/2 mm ...

[Will]

is it the phone side or the charger side that is damaged? - i have some spare plugs to connect to the phone, but not sockets (inside the phone)

Will

[Pycon]

In the package of my E200 there're the cradle to connect the phone ( and charging it ) and the power charger too...  :??:  Don't u?

[aqwarel]

Will, on Jan 25 2006, 14:54, said:

is it the phone side or the charger side that is damaged? - i have some spare plugs to connect to the phone, but not sockets (inside the phone)

Will

<{POST_SNAPBACK}>

a need conector inside the phone

[Pycon]

aqwarel, on Jan 26 2006, 22:44, said:

a need conector inside the phone

<{POST_SNAPBACK}>

Oh oh... ops... No way to change it.  

[fluffcat1]

aqwarel, on Jan 26 2006, 23:44, said:

a need conector inside the phone

<{POST_SNAPBACK}>

I've sold out currently but they are £10 when I sell them on ebay.

See this thread:

http://www.modaco.co...rl-t233102.html

http://cgi.ebay.co.u...item=6474125387

Richard

Edited by fluffcat1, 29 January 2006 - 02:36 PM.

[fluffcat1]

Pycon, on Jan 29 2006, 14:02, said:

Oh oh... ops... No way to change it. 

<{POST_SNAPBACK}>

Done it a few times actually  8)

Richard

[Pycon]

fluffcat1, on Jan 29 2006, 14:31, said:

Done it a few times actually  8)

Richard

<{POST_SNAPBACK}>

Sure?   How? Only opening the phone is difficult...  :cry:

[fluffcat1]

Pycon, on Jan 30 2006, 12:14, said:

Sure?  How? Only opening the phone is difficult...  :cry:

<{POST_SNAPBACK}>

get yourself a 'case opening tool' and it's easy to open the phone! It's a small, flat edged piece of plastic, but you could use a gutar plectrum. There are many methods on modaco for opening the phone, but soldering the connector is harder, if you are not good with a solderng iron get someone else to do it for you.

Richard

[fluffcat1]

fluffcat1, on Jan 29 2006, 15:30, said:

I've sold out currently but they are £10 when I sell them on ebay.

<{POST_SNAPBACK}>

Listed some more. See here:

http://www.modaco.co...=0

I'll get around to doing a method in the future - any questions ask.

Richard

[Pycon]

fluffcat1, on Jan 30 2006, 11:22, said:

get yourself a 'case opening tool' and it's easy to open the phone! It's a small, flat edged piece of plastic, but you could use a gutar plectrum. There are many methods on modaco for opening the phone, but soldering the connector is harder, if you are not good with a solderng iron get someone else to do it for you.

Richard

<{POST_SNAPBACK}>

Oh man, I've found only one method to open the cell... What else methods do u know?  :oops: Could u wirte me the links? Thx in advance...  

[fluffcat1]

Pycon, on Feb 1 2006, 15:38, said:

Oh man, I've found only one method to open the cell... What else methods do u know?  :oops: Could u wirte me the links? Thx in advance... 

<{POST_SNAPBACK}>

There are no screws holding the case on - use your 'case opening tool' ( NOT a knife!) and slide it between the chassis and the face at an upward angle, the face will pop free of the retaining lugs.

Richard

[nisa]

Hi
I have a problem in Iran. My E200 's power cable has been lost and I can't find it here. Can I make it by myself. what kind of cable and connectors should I buy here. I need this just for power supply.
thank u in advance
nima

[Pycon]

fluffcat1, on Feb 1 2006, 14:47, said:

There are no screws holding the case on - use your 'case opening tool' ( NOT a knife!) and slide it between the chassis and the face at an upward angle, the face will pop free of the retaining lugs.

Richard

<{POST_SNAPBACK}>

Sure?  :oops:  Many thanks!  8)