Jump to content

MPX220 Camera Problem Solved !


Guest gorannet

Recommended Posts

  • 2 weeks later...
  • 1 month later...
Guest mizzramos
Finnaly i got idea howi can still use camera

Open on phon and then twist on top

Take a look at attached file

OMG, it workssss! How you found out by twisting it, you are a genius!

Link to comment
Share on other sites

Guest gfourner_mpx220
Finnaly i got idea howi can still use camera

Open on phon and then twist on top

Take a look at attached file

What exactly are you talking about, twisting the phone? Is this a joke to break the thing off it's hinges?

Which problem are you trying to solve exactly other than obvious 1.2 MP quality issues which we all know about?

Is the "twist method" meant to be a joke to express frustration with the cameras shortcomings?

OK..enough questions...there are not any answers in this thread.

EXPLAIN please.

G

Link to comment
Share on other sites

  • 2 weeks later...
Guest cingularv551

I have an mpx220 with a camera that intermittently doesn't work. Twisting the upper housing as shown above gets the camera working again when it acts up.

I acquired another upper housing/lcd/flex cable assembly and installed it. Unfortunetly, this one is from the same manufacturing batch as my original one and acts up in the same way.

Further investigation reveals that the circuit board which connects the flex cable to the camera appears to have an intermittent connection somewhere inside the board. Flexing the board one way will get the camera talking to the main board again. Flexing it another way will stop all communication between the two items.

Link to comment
Share on other sites

  • 2 weeks later...
Guest gfourner_mpx220
I have an mpx220 with a camera that intermittently doesn't work. Twisting the upper housing as shown above gets the camera working again when it acts up.

I acquired another upper housing/lcd/flex cable assembly and installed it. Unfortunetly, this one is from the same manufacturing batch as my original one and acts up in the same way.

Further investigation reveals that the circuit board which connects the flex cable to the camera appears to have an intermittent connection somewhere inside the board. Flexing the board one way will get the camera talking to the main board again. Flexing it another way will stop all communication between the two items.

Thank you for the insight and understanding of the matter. My camera didn't have any problems so I was curious to what everyone was talking about.

This makes sense with the flex ribbon not communicating and a little ingenuity to work around with a slight twist. I tried it and thought I would break my camera..LOL.

Thanks..I'll use this method if I need to..until then. so far so good.

G

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.