51 replies to this topic

[PJDelaney]

Anyone know if the Kaiser will fit inside this gamepad? I used to play games on my Wizard with it in landscape mode as the WnW and messaging buttons at the top/left made it fairly easy to game on but now I have my Vario III all the many button are around the 4-way pad making it, in portrait mode I always seem to catch another button when I don't mean to.  I'm not sure the bluetooth pad can still even be found or even if the driver work with WM6 but just wondered if anyone had tried?

Thanks

PJ

[yves]

PJDelaney, on Oct 21 2007, 21:35, said:

Anyone know if the Kaiser will fit inside this gamepad? I used to play games on my Wizard with it in landscape mode as the WnW and messaging buttons at the top/left made it fairly easy to game on but now I have my Vario III all the many button are around the 4-way pad making it, in portrait mode I always seem to catch another button when I don't mean to.  I'm not sure the bluetooth pad can still even be found or even if the driver work with WM6 but just wondered if anyone had tried?

Thanks

PJ

it works for me on the Motorola Q9h WM6 with the latest drivers. Chainpus' page seems unavailable by now so I uploaded the drivers here.

[Axman]

Just tried it with my Tilt and fits perfectly. Haven't tried the drivers though.

[PJDelaney]

yves, on Dec 23 2007, 20:42, said:

it works for me on the Motorola Q9h WM6 with the latest drivers. Chainpus' page seems unavailable by now so I uploaded the drivers here.

I tried these and I cannot get the Kaiser to recognise the pad, gives the message "Connection Error, We don't support this Bluetooth Gamepad".  I tried v1.4, v1.5 and v1.52 and none work, any ideas?  The pad itself seems to work and the Kaiser will see it if I try and pair although it needs a passkey which I don't have.

[PJDelaney]

PJDelaney, on Feb 11 2008, 21:22, said:

I tried these and I cannot get the Kaiser to recognise the pad, gives the message "Connection Error, We don't support this Bluetooth Gamepad".  I tried v1.4, v1.5 and v1.52 and none work, any ideas?  The pad itself seems to work and the Kaiser will see it if I try and pair although it needs a passkey which I don't have.

The passkey is 0000 but its of no use, I tried the desktop drivers and the pad works fine but it still won't connect with the Kaiser, anyone had it working?

[Immortal547]

yves, on Dec 23 2007, 19:42, said:

it works for me on the Motorola Q9h WM6 with the latest drivers. Chainpus' page seems unavailable by now so I uploaded the drivers here.

I know this thread is old but I was hoping someone could tell me how to get this gamepad to work. I have a Q9c but everytime I select activate gamepad on my Q9c I get an error saying I don't have enough memory to run it. I also tried using in the my pc but I can't seem to configure the gamepad at all even with the correct com port selected. Any help would be appreciated.

[yves]

Immortal547, on Jul 19 2008, 00:48, said:

I know this thread is old but I was hoping someone could tell me how to get this gamepad to work. I have a Q9c but everytime I select activate gamepad on my Q9c I get an error saying I don't have enough memory to run it. I also tried using in the my pc but I can't seem to configure the gamepad at all even with the correct com port selected. Any help would be appreciated.

This is odd. Is your bluetoothstack by Microsoft or by Widcomm?

[Pistacchio]

Hi.....sorry for my english...i'm italian.
I have the BGP100 bluetooth gamepad and Samsung Omnia (WM 6.1 pro)....i have tried install all driver but i get error:
Connection error! Sorry! We don't support this bluetooth GamePad

On PC (Windows XP) and N95 (Symbian s60 v3) work fine.....i have the last driver 1.5.0.2

I think the problem is the driver....the last drive for this pad is WM5....I need driver for WM 6.1 pro.......please help me !!!!!!

Edited by Pistacchio, 05 January 2009 - 02:28 PM.

[yves]

I use the latest driver (made for WM5) on my HTC Touch Diamond (WM6.1) without any problems.
Does the Omnia use the MS stack or widcomm one?

[PJDelaney]

yves, on Jan 5 2009, 15:59, said:

I use the latest driver (made for WM5) on my HTC Touch Diamond (WM6.1) without any problems.
Does the Omnia use the MS stack or widcomm one?

What driver version are you using?

[Pistacchio]

yves, on Jan 5 2009, 14:59, said:

I use the latest driver (made for WM5) on my HTC Touch Diamond (WM6.1) without any problems.
Does the Omnia use the MS stack or widcomm one?

I don't know.....
I tried all driver......the program work but when i connect to a pad (the led on bt pad flash) i get error....

Can you post or send via email the cab you install ???

I think the problem is in the bluetooth driver in Omnia.....

Edited by Pistacchio, 05 January 2009 - 04:23 PM.

[yves]

Pistacchio, on Jan 5 2009, 17:11, said:

I don't know.....
I tried all driver......the program work but when i connect to a pad (the led on bt pad flash) i get error....

Can you post or send via email the cab you install ???

I think the problem is in the bluetooth driver in Omnia.....

I just use the software I also uploaded to my server, see post above.
the bluetooth-stack can not be changed very easily I am afraid

[Pistacchio]

yves, on Jan 5 2009, 20:46, said:

I just use the software I also uploaded to my server, see post above.
the bluetooth-stack can not be changed very easily I am afraid

Hi...i have download your drive....tried another driver (1.4-1.5-1.5.02)...all mode...but i get the same error.....
In BT setting in Omnia i have tried with serialport enable/disable...with or without paring...nothing...error...error...error
              

Edited by Pistacchio, 05 January 2009 - 09:48 PM.

[yves]

you do not need the serial port settings. the software uses a proprietary setting and sets up a com port itsself. you still get the error about the gamepad not supported?

[Pistacchio]

yves, on Jan 5 2009, 22:32, said:

you do not need the serial port settings. the software uses a proprietary setting and sets up a com port itsself. you still get the error about the gamepad not supported?

I have tried for disperation.....
Yes i will get the same error....i tried on Nokia N95 and on a PC windows XP and work fine......on Diamond (WM6.1) work...on Omnia (WM6.1) DON'T WORK

Please help me......

[yves]

Pistacchio, on Jan 5 2009, 23:41, said:

I have tried for disperation.....
Yes i will get the same error....i tried on Nokia N95 and on a PC windows XP and work fine......on Diamond (WM6.1) work...on Omnia (WM6.1) DON'T WORK

Please help me......

hmm. try to use the widcomm-version of the driver

[Pistacchio]

yves, on Jan 6 2009, 12:12, said:

hmm. try to use the widcomm-version of the driver

Thanks...i will try.....

I have tried with the widcomm version but the program don't start....certificate error......
Tried HTC version and i got the error : Connection error! Sorry! We don't support this bluetooth GamePad

Please yves help me....when you insert cd there are many menu to choose....can you tell me step by step which menu you select ????
If possible make some screenshot.....pleeeeeeeeeeeeeeease....thanks

Edited by Pistacchio, 06 January 2009 - 08:37 PM.

[yves]

Pistacchio, on Jan 6 2009, 16:43, said:

Thanks...i will try.....

I have tried with the widcomm version but the program don't start....certificate error......
Tried HTC version and i got the error : Connection error! Sorry! We don't support this bluetooth GamePad

Please yves help me....when you insert cd there are many menu to choose....can you tell me step by step which menu you select ????
If possible make some screenshot.....pleeeeeeeeeeeeeeease....thanks

I have no clue what stack your device is using. Can you install files directly from BGP100_v150_no_games\Files\WinCE_MS\English\install.exe?
or try BGP100_v150_no_games\Files\WinCE_Widcomm\English\install.exe. If both wont'd work (propably becasue of the device version).
Thus, I RARed you the two installations.
Just try one after another: MS-files you have to place all of them in one folder (e.g. \Gamepad) and copy BGPSoftReset.exe to \Windows. Then, just run gamepad.exe
widcomm, you have to place BGPSoftReset.exe in \Windows again, the rest into another folder (e.g. \GamepadWid) and run Gamepad.exe again.

Attached Files

•  Install_MS.rar   41K   121 downloads
•  Install_widcomm.rar   139.38K   120 downloads

[Pistacchio]

yves, on Jan 6 2009, 22:27, said:

I have no clue what stack your device is using. Can you install files directly from BGP100_v150_no_games\Files\WinCE_MS\English\install.exe?
or try BGP100_v150_no_games\Files\WinCE_Widcomm\English\install.exe. If both wont'd work (propably becasue of the device version).
Thus, I RARed you the two installations.
Just try one after another: MS-files you have to place all of them in one folder (e.g. \Gamepad) and copy BGPSoftReset.exe to \Windows. Then, just run gamepad.exe
widcomm, you have to place BGPSoftReset.exe in \Windows again, the rest into another folder (e.g. \GamepadWid) and run Gamepad.exe again.

Hi...thanks again for your support...but i have the same problem....with Widcomm i got certificate error and with MS i got the same error.....

Edited by Pistacchio, 07 January 2009 - 05:06 PM.

[yves]

Pistacchio, on Jan 7 2009, 18:06, said:

Hi...thanks again for your support...but i have the same problem....with Widcomm i got certificate error and with MS i got the same error.....

Can you make a screenshot? If it's the message warning you about the not signed applications, just accept and dismiss it.