Jump to content


Photo

Flashing using 64bit Windows 7

- - - - -

  • Please log in to reply
61 replies to this topic

#41
damagi

damagi

    Newbie

  • Members
  • Pip
  • 4 posts
  • Devices:Samsung Omnia 2 (VZW)
Hmm, I'm running into similar problems. When my phone is off and I plug it into the usb port it will detect, then after a couple seconds it will disconnect. Any ideas here?

  • 0

#42
mzabu

mzabu

    Newbie

  • Members
  • Pip
  • 31 posts
  • Devices:Omnia i8000 (Omnia II)
HI KSTAN,

Please help me in this,

i followed your instruction carefully "first time i flash my omnia 2 no problem at all" flashed successfully

but now i tried to flash my friend's omnia 2 (WM 6.1) (updated the driver already) after click the Detect button nothing happens.

then i tried mine again to see whether its detecting but nothing.

mine is Win7 64bit.

Hi guys,

You can now flash your O2 ROM using x64 Windows 7.

Procedure
1. Press F8 before windows boot (after bios).
2. Select "Disable Driver Signature Enforcement" and boot up windows.
3. Connect ur phone to ur PC / laptop (Phone must be off).
4. The driver Samsung MITs USB sync will be installed.
5. Open Device Manager, double-click on Samsung MITs USB sync and re-install with driver provided below.
6. Choose Update Driver->Browse my computer for driver software->Let me pick from a list of device drivers on my computer->Click on Have Disk and browse to the driver folder and install. (If prompted driver unsigned, ignore and click ok. Driver is dated 2003).
7. Then right-click on Octans Downloader->Compatibility, select "Windows XP (SP3)" and check "Run as Administrator".
8. Flash as per normal... :)

Note*: You will need to re-install the driver everytime if it is not the correct version after a reboot.

I have tested and flashed it numerous times without any issue.
Do not try on vista as I'm not sure.

Attached Files


Edited by mzabu, 17 May 2010 - 01:41 PM.

  • 0

#43
row hide in

row hide in

    Newbie

  • Members
  • Pip
  • 13 posts
  • Gender:Male
  • Location:indonesia

i have this messages in octans

WinUSB_queryinterfacesetting Error 1
WinUSB_querypipe Error 1
Setpipepolicy error 1
WinUSB_initialize

-
Service stopped successfully
[Setup] Windows 7
[Setup] Download Ram Size :41777920 bytes,(39 MB)
Service is already stopped. So I will NOT Re-start the service...
OnDeviceChange \\?\USB#VID_04E8&PID_6619#5&25cc7127&0&4#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}
[Error:0] Not receive OKUD! TimeOut:2
[Error:0] Not receive OKUD! TimeOut:1
[Error:0] Not receive OKUD! TimeOut:0



yap, same problem... :)

  • 0

#44
taziwac

taziwac

    Newbie

  • Members
  • Pip
  • 9 posts
I FINALLY got it to work. The key was changing Octans so that it was running in XP SP3 mode. I know that was in the instructions, but I kept breezing past that step.

  • 0

#45
Zebak

Zebak

    Newbie

  • Members
  • Pip
  • 1 posts

i have this messages in octans

WinUSB_queryinterfacesetting Error 1
WinUSB_querypipe Error 1
Setpipepolicy error 1
WinUSB_initialize

-
Service stopped successfully
[Setup] Windows 7
[Setup] Download Ram Size :41777920 bytes,(39 MB)
Service is already stopped. So I will NOT Re-start the service...
OnDeviceChange \\?\USB#VID_04E8&PID_6619#5&25cc7127&0&4#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}
[Error:0] Not receive OKUD! TimeOut:2
[Error:0] Not receive OKUD! TimeOut:1
[Error:0] Not receive OKUD! TimeOut:0


I am seeing the same error on Windows 7 SP1 x86 ...

  • 0

#46
Extremegmx

Extremegmx

    Regular

  • Members
  • PipPip
  • 66 posts
  • Location:Slovenija
  • Devices:Samsung I8000
Hey i want to flash my O2 but I get stuck here:
Posted Image

PLS help me im so angry, I trying to flash my phone for 2 hours now but with no luck :huh:

  • 0

#47
fytos

fytos

    Newbie

  • Members
  • Pip
  • 1 posts

Damn step ... and not mentioned a lot either!!

I read a lot of answers. Although I flashed the omnia 1-2 times in the past and my HTCs earlier than that, I was missing ONE MAJOR STEP!!
I tried to flash the omnia this time at least 5-6 times with the usbinitialize problem.
Tried with admin privilages (although I had the service off),
Turned OFF, Turned ON ... nothing would work. (Yes the modem and the driver were done).

PEOPLE PAY ATTENTION:
REMEMBER TO GO TO YOUR OCTANS THEN PROPERTIES AND SET THE COMPATIBILITY TO WINDOWS XP3 !!!
That way it will work on windows 7!!

If you don't do that you will stay there wondering what the problem might be!!

If anybody found this useful, send me a msg!

  • 0

#48
panman

panman

    Newbie

  • Members
  • Pip
  • 2 posts
  • Devices:SEX1
thank you very much for information...

  • 0

#49
WJames

WJames

    Newbie

  • Members
  • Pip
  • 10 posts
  • Devices:Samsumg Omnia 2
  • Twitter:@none
If your USB connection to your phone keeps connecting and then disconnecting, Windows 7 may be forcing the use of a previously installed, signed Samsung USB driver. If so, you may have to uninstall/delete this driver before you install the new 64 bit driver. Otherwise, Windows 7 keeps trying to use the signed version even with digitally signed option disabled.

This approach fixed my issue. I hope it helps other as well.

W James

  • 0

#50
MoDarKau

MoDarKau

    Newbie

  • Members
  • Pip
  • 3 posts
  • Devices:Samsung Omnia II i8000
For people who is stuck after following line:

OnDeviceChange \\?\USB#VID_04E8&PID_6619#5&c0aa250&0&2#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}

Try to set compatibility to XP SP3 and start Octans Mini using native Windows 7 Explorer, it works for me. It appears when running non native file browser programs --especially 32 bit ones-- it will fail to start Octans Mini in XP SP3 compatibility mode. It happens with me while using FreeCommander 32 bit. :P

  • 0

#51
drkphnx

drkphnx

    Newbie

  • Members
  • Pip
  • 9 posts

For people who is stuck after following line:

OnDeviceChange \\?\USB#VID_04E8&PID_6619#5&c0aa250&0&2#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}

Try to set compatibility to XP SP3 and start Octans Mini using native Windows 7 Explorer, it works for me. It appears when running non native file browser programs --especially 32 bit ones-- it will fail to start Octans Mini in XP SP3 compatibility mode. It happens with me while using FreeCommander 32 bit. :P

Hi,
I have a quite similar problem, I arrive at the above mentioned message, then I pust start, octans says:
[Down] PDA Image.
[Down] CSC Image.
[CSC:0] Download start 0x0

on the O2 the Download mode page appear but the download do not start,
do you know why ???
Thanks, bye bye!!!

  • 0

#52
MoDarKau

MoDarKau

    Newbie

  • Members
  • Pip
  • 3 posts
  • Devices:Samsung Omnia II i8000

Hi,
I have a quite similar problem, I arrive at the above mentioned message, then I pust start, octans says:
[Down] PDA Image.
[Down] CSC Image.
[CSC:0] Download start 0x0

on the O2 the Download mode page appear but the download do not start,
do you know why ???
Thanks, bye bye!!!


what OS you are using? maybe you are not using driver provided in this thread? :P

  • 0

#53
pma7779

pma7779

    Newbie

  • Members
  • Pip
  • 27 posts
  • Gender:Male
  • Location:Bronx
  • Interests:Windows
  • Devices:Omnia i920

what OS you are using? maybe you are not using driver provided in this thread? ;)


PLEASE HELP. First off, I know i'm a noobie. I have been reading every post on flashing my phone. And I think I followed all steps. When I connect my phone (turned off of course) it charges but it does not display in the device manager or devices and printers folder. I have no clue what I am doing wrong. I downloaded octans mini and Samsung_CDMA_modem_4_1_.34.zip. I installed the Samsung_CDMA_modem_4_1_.34.zip. But yet nothing happens.

I really hope someone can help me. I hate the garbage that comes with the omnia i920 and I want to flash the phone.

Thanks

Totally confused and lost.

  • 0

#54
Folkien

Folkien

    Newbie

  • Members
  • Pip
  • 1 posts
  • Devices:E71

okay i really need some help on this if anyone can. I tried to do the flash for my omnia 2 but for some reason i dont have any F8 Function on my laptop that allows me to toggle the whole driver signature thing, Because im not sure if its related but when i use octans, and set up the PDA part and turn off my phone, it doesnt do anything, just goes into battery charging mode...

Ive been trying this for a day now and cant seem to make it work... if anyone can help me please do!

Cheers



Bravo ! :P

  • 0

#55
Speedfrog

Speedfrog

    The Viking

  • Moderator Team
  • PipPipPipPipPipPip
  • 2,014 posts
  • Gender:Male
  • Location:Norway
  • Interests:football
  • Devices:Omnia II 16 GB
why do you post Folkien if you cant help him?

follow this guide
http://www.modaco.co...-win7-32-64bit/

and download the readysetdriver from post 24 and restart your computer. also you need to install the 32/64 bits drivers into your phone.

  • 0

#56
VitasLoWang

VitasLoWang

    Newbie

  • Members
  • Pip
  • 8 posts
  • Devices:Samsung Omnia II
Hello I have successfully flashed my Omnia, but now it seems active sync does not work with my pc! Windows mobile device center says "not connected" when I connect my phone and have activesync set as a USB connection. Is this custom driver the cause of it? Should I rollback to a previous one? Thank you

  • 0

#57
VitasLoWang

VitasLoWang

    Newbie

  • Members
  • Pip
  • 8 posts
  • Devices:Samsung Omnia II
anyone having similar problem?

  • 0

#58
idrak3

idrak3

    Regular

  • Members
  • PipPip
  • 96 posts
  • Gender:Male
  • Location:Indonesia

Hi guys,

You can now flash your O2 ROM using x64 Windows 7.

Procedure
1. Press F8 before windows boot (after bios).
2. Select "Disable Driver Signature Enforcement" and boot up windows.
3. Connect ur phone to ur PC / laptop (Phone must be off).
4. The driver Samsung MITs USB sync will be installed.
5. Open Device Manager, double-click on Samsung MITs USB sync and re-install with driver provided below.
6. Choose Update Driver->Browse my computer for driver software->Let me pick from a list of device drivers on my computer->Click on Have Disk and browse to the driver folder and install. (If prompted driver unsigned, ignore and click ok. Driver is dated 2003).
7. Then right-click on Octans Downloader->Compatibility, select "Windows XP (SP3)" and check "Run as Administrator".
8. Flash as per normal... :D

Note*: You will need to re-install the driver everytime if it is not the correct version after a reboot.

I have tested and flashed it numerous times without any issue.
Do not try on vista as I'm not sure.



Work like charm for me thanks dude..

Windows 7 B)

  • 0
Omnia II
Speedfrog
JJ1_6.5.3_21352_Sense_2018_Lite
Phone_I8000XXJJ1

#59
lordmorpheus

lordmorpheus

    Newbie

  • Members
  • Pip
  • 5 posts
OnDeviceChange \\?\USB#VID_

same error as many other user...

  • 0

#60
medicspecialist

medicspecialist

    Newbie

  • Members
  • Pip
  • 1 posts
  • Devices:Samsung Omnia 2 i920

did u read 1st post???

1. switch off ur phone.
2. connect to ur pc.
3. it will auto detect and install Samsung MITs USB sync driver.


you guys rock thank you soooo much
for taking the time to get newbees like me through this I just flash the sence all in one 2.0 and it is AWESOME. way better than the original RON beer mony will be on its way pay day


a big secret to any other noobs that follow this blog you really have to move during the driver install

  • 0




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users