25 replies to this topic

[amitsharma.atc]

hi guys i hv seen a video on you tube
in this video gsenser and 3d carousel and 3d email/sms also working smooth

link



can somone able to find out how he did that

thanks
sorry for my bad english

[Iluhan]

WOW ! To this video already hundred it let-was discussed already time...

[lupus_hegemonia]

Unfortunatelly... it DOESN'T (working properly) in i900, as Omnia I doesn't supporting 3Ds...

[jebise]

lupus_hegemonia, on Mar 11 2010, 18:46, said:

Unfortunatelly... it DOESN'T (working properly) in i900, as Omnia I doesn't supporting 3Ds...

yeah carousel works fine on my omnia 2. I use pointui with pointsence now and that works great too.

[meabigbaldguy]

jebise, on Mar 11 2010, 21:41, said:

yeah carousel works fine on my omnia 2. I use pointui with pointsence now and that works great too.

That's strange, because I'm not getting the same effect with the carousel on my O2.  Did you have to enable the feature somewhere?

[meabigbaldguy]

jebise, on Mar 11 2010, 21:41, said:

yeah carousel works fine on my omnia 2. I use pointui with pointsence now and that works great too.

That's strange, because I'm not getting the same effect with the carousel on my O2.  Did you have to enable the feature somewhere?

[mattandy]

my carousel works fine but a can't get the sms sliding effect as in the video, please if someone knows haw to activate it
i've already installed GinKage OpenGL ES v1but no way  

[jebise]

no i didn't really do anything special. I remember it being laggy at some point, then after a bit of use it fixed itself. It could have been also CanKage openGL 0.26 that helped but i know i did a hard reset after i installed that and it still worked so i dunno

[arrowana]

Can someone please post a step by step instruction of how to get the carousel working in 3D for the i920 Omnia.  Thank you.

[amitsharma.atc]

arrowana, on Mar 12 2010, 19:42, said:

Can someone please post a step by step instruction of how to get the carousel working in 3D for the Omnia 2.  Thank you.

+1

[navin-shetty]

Found the solution here: You need to hack registry of SPB to enable Gsenser for carousel

Change the values as bellow:
HKLM\\Software\Spb Software House 2\Spb Mobile Shell\GI\GIEnabled =1
HKLM\\Software\Spb Software House 2\Spb Mobile Shell\GI\SelectorScene\ Gsensor = 1 Reflections =1

HKLM\\Software\Spb Software House 2\Spb Mobile Shell\GI\GIEnabled =1
HKLM\\Software\Spb Software House 2\Spb Mobile Shell\GI\SelectorScene\ Gsensor = 1 Reflections =1

Hope this will help ya....

[meabigbaldguy]

navin-shetty, on Mar 13 2010, 09:11, said:

Found the solution here: You need to hack registry of SPB to enable Gsenser for carousel

Change the values as bellow:
HKLM\\Software\Spb Software House 2\Spb Mobile Shell\GI\GIEnabled =1
HKLM\\Software\Spb Software House 2\Spb Mobile Shell\GI\SelectorScene\ Gsensor = 1 Reflections =1

HKLM\\Software\Spb Software House 2\Spb Mobile Shell\GI\GIEnabled =1
HKLM\\Software\Spb Software House 2\Spb Mobile Shell\GI\SelectorScene\ Gsensor = 1 Reflections =1

Hope this will help ya....

Thanks, N-S, for the info.  Actually, it did not work for me with 3.5.0; however, I upgraded to 3.5.3 and it works well.

[arrowana]

meabigbaldguy, on Mar 13 2010, 05:05, said:

Thanks, N-S, for the info.  Actually, it did not work for me with 3.5.0; however, I upgraded to 3.5.3 and it works well.

Yes, it's work in 3D but when I tilt the phone nothing change (G-sensor?)

[meabigbaldguy]

arrowana, on Mar 13 2010, 15:32, said:

Yes, it's work in 3D but when I tilt the phone nothing change (G-sensor?)

After playing with this for a little while, the carousel does tilt but it's very laggy - and the battery life seems to go much sooner than before hand.

To be honest, I find that this 3D carousel is really nothing exciting and doesn't really have a functional purpose.

[dwallersv]

jebise, on Mar 12 2010, 06:04, said:

no i didn't really do anything special. I remember it being laggy at some point, then after a bit of use it fixed itself. It could have been also CanKage openGL 0.26 that helped but i know i did a hard reset after i installed that and it still worked so i dunno

Uh, yeah, ya think?

Folks, that's the magic here. Note that the video is from.... drum roll please... GINKAGE!!!!

To get that sort of smooth 3D performance, you need to install Ginkage's accelerated OpenGL library, make the reg changes listed in this thread (it varies depending on which version of MS3 you've got -- 3.5.3 has 3D support for Omnia).

The key here is the accelerated 3D lib, however!

[meabigbaldguy]

dwallersv, on Mar 13 2010, 18:20, said:

Uh, yeah, ya think?

Folks, that's the magic here. Note that the video is from.... drum roll please... GINKAGE!!!!

To get that sort of smooth 3D performance, you need to install Ginkage's accelerated OpenGL library, make the reg changes listed in this thread (it varies depending on which version of MS3 you've got -- 3.5.3 has 3D support for Omnia).

The key here is the accelerated 3D lib, however!

This is absolutely right!  I missed the fact that the video is from GINKAGE - as I'm sure a few others did.  Anyway, I've installed the CAB, and made the proper reg edits and my
G Sensor works so much better now - especially with MS 3.5.3!  One thing to note from the Chainfire post is that it mentions to set the CPU performance to high; however, I've mine set to AUTO and it works well anyway.  Despite all of this, it's still a gimmick, albeit a cooler one now.

Thanks for the "shocking" revelation dwallersv.

Edited by meabigbaldguy, 14 March 2010 - 10:34 PM.

[trung365]

Hi,

I'm using B7610 (Omnia Pro-Qwerty), installed the cab and tried with SPB 3.5.3, but even after soft reset and all reg adjustments, it' still very laggy (carousel), and GSensor doesn't work too. Change power management to High can only improve very little.
Hope any one could help me out!

Thanks a lot in advance.

[amitsharma.atc]

meabigbaldguy, on Mar 15 2010, 04:02, said:

This is absolutely right!  I missed the fact that the video is from GINKAGE - as I'm sure a few others did.  Anyway, I've installed the CAB, and made the proper reg edits and my
G Sensor works so much better now - especially with MS 3.5.3!  One thing to note from the Chainfire post is that it mentions to set the CPU performance to high; however, I've mine set to AUTO and it works well anyway.  Despite all of this, it's still a gimmick, albeit a cooler one now.

Thanks for the "shocking" revelation dwallersv.

so you are saying that now its working fully means 3d carousel, 3d sms/email & gsenser

so if its working great with spb mobile shell 3.5.3 ???

i m gonna purchase omnia 2 this week

anything else any one want to say about it

[MufAtHome]

dwallersv, on Mar 13 2010, 18:20, said:

To get that sort of smooth 3D performance, you need to install Ginkage's accelerated OpenGL library, make the reg changes listed in this thread (it varies depending on which version of MS3 you've got -- 3.5.3 has 3D support for Omnia).

The key here is the accelerated 3D lib, however!

i have installed OpenGLESv1 by Ginkage, but Carousel in SPB 3.5.3 (build 9885) doesn't work anyway (works ... but no smooth at all). It behaves the same way, when i uninstall gl library. Carousel in "favourite contacts" works well.
I have i8000 (XXIJ3). Should I try flash to JB1 (feb 2010)? Or any other suggestion? Thx

[cliffco823]

I installed the cab and made the registry changes.  Everything appears good, but it will not let me select any panels while in the carousel.  SOft reset didn't help.