Jump to content

I bricked my Omnia II M715 PLEASE HELP


Guest bilguunbayr

Recommended Posts

Guest bilguunbayr

Hi guys. I think i bricked my Omnia II Anycall SCH-M715 Korean WM 6.1 phone. I tried to flash my phone with Omnia II I8000 rom with Octans. I guess that was the big mistake. Now phone is not booting anymore. Then I tried to flash again Octans isn`t detected my phone. I attached screen shots. when i press reset button it writes on the screen(1st image) ` No charging image. Download CSC binary`. When i hit the power button(2nd image) it shows phone and pc screen. I tried to hard reset by using button combination such as volume up+hold+call+power key. but it's also unsuccessful. What am I supposed to do now. Send phone to Korea back?

post-684722-1270857929_thumb.jpg

post-684722-1270857937_thumb.jpg

Edited by bilguunbayr
Link to comment
Share on other sites

Guest jebise

yeah why in the world would you install i8000 ROM on different hardware? It just wont work, but you in luck i had that second screen shot once not to sure about CSC. I think you can fix it since it still boots.

Try this make sure you do not connect the phone till step 6

1.) Turn of phone take out batter and put it back in.

2.) Download korean stock PDA, CSC.

3.) Open OCTANS 2.14

4.) Add the stock PDA and CSC file

5.) Hit detect

6.) Plug in the phone

7.) Hit start download

8.) Pray

9.) If it works buy me a beer if it dose not i tried.

Edited by jebise
Link to comment
Share on other sites

Guest msra6la2
Hi guys. I think i bricked my Omnia II Anycall SCH-M715 Korean WM 6.1 phone. I tried to flash my phone with Omnia II I8000 rom with Octans. I guess that was the big mistake. Now phone is not booting anymore. Then I tried to flash again Octans isn`t detected my phone. I attached screen shots. when i press reset button it writes on the screen(1st image) ` No charging image. Download CSC binary`. When i hit the power button(2nd image) it shows phone and pc screen. I tried to hard reset by using button combination such as volume up+hold+call+power key. but it's also unsuccessful. What am I supposed to do now. Send phone to Korea back?

if you haven't touched the eboot then you still have a chance. I had the same (as the first image) problem when I upgraded my phone from Windows Mobile 6.1 HZHIH6 (without touching the eboot) to Windows Mobile 6.5 HZHIL1. I just flashed back to IH6 then tried it again and it worked.

Link to comment
Share on other sites

Guest bilguunbayr
yeah why in the world would you install i8000 ROM on different hardware? It just wont work, but you in luck i had that second screen shot once not to sure about CSC. I think you can fix it since it still boots.

Try this make sure you do not connect the phone till step 6

1.) Turn of phone take out batter and put it back in.

2.) Download korean stock PDA, CSC.

3.) Open OCTANS 2.14

4.) Add the stock PDA and CSC file

5.) Hit detect

6.) Plug in the phone

7.) Hit start download

8.) Pray

9.) If it works buy me a beer if it dose not i tried.

Hi jebise. I installed i8000 Rom on my phone because of KOREAN language. I tried to change its language. Now my phone is not booting. I think I erased everything. Thanx to you answer.

Edited by bilguunbayr
Link to comment
Share on other sites

Guest bilguunbayr
if you haven't touched the eboot then you still have a chance. I had the same (as the first image) problem when I upgraded my phone from Windows Mobile 6.1 HZHIH6 (without touching the eboot) to Windows Mobile 6.5 HZHIL1. I just flashed back to IH6 then tried it again and it worked.

Hi msra6la2. I'm afraid that i touched the eboot. Is that the reason why my phone is not booting? Non windows nor octans can detect it. I think it's gone ;)

Edited by bilguunbayr
Link to comment
Share on other sites

Guest h4x0r3d
Hi msra6la2. I'm afraid that i touched the eboot. Is that the reason why my phone is not booting? Non windows nor octans can detect it. I think it's gone ;)

are you use xp ? or other windows ?

is your usb cable in usb 2.0 ?

soft rest your Pc

take of the battery for 5 min.

change usb place (usb 2.0)

and follow jebise instructions

and pray ,if not work bye bye omnia ;)

Edited by h4x0r3d
Link to comment
Share on other sites

Guest jebise
Hi msra6la2. I'm afraid that i touched the eboot. Is that the reason why my phone is not booting? Non windows nor octans can detect it. I think it's gone ;)

yes that is why eboot is like the PC bios if you flash it in correctly then you brick it. But from the screen shots it looked like you could fix it, so i don't understand did you try to flash it again before you read my instructions?

Link to comment
Share on other sites

Guest bilguunbayr
are you use xp ? or other windows ?

is your usb cable in usb 2.0 ?

soft rest your Pc

take of the battery for 5 min.

change usb place (usb 2.0)

and follow jebise instructions

and pray ,if not work bye bye omnia ;)

i use xp sp3.

I've tried all of these ways. and nothing happened. And I sent my phone to Korea today. Lets see what will happen.

Link to comment
Share on other sites

Guest bilguunbayr
yes that is why eboot is like the PC bios if you flash it in correctly then you brick it. But from the screen shots it looked like you could fix it, so i don't understand did you try to flash it again before you read my instructions?

Hi jebise. I guess J-tag method is last chance. In our country no one has that cable. At least phone repairs. And I sent my phone to Korea back. Now all i can do is pray ;)

Link to comment
Share on other sites

Guest bilguunbayr
what's your latest status? is it working again?

Hocam sanirim Turksun. Tel.im bir turlu boot edemedi. NE bilgisayar ne de octans goruyor onu. Sonunda Kore'ye yolladim. Adamlar tamir edemezse artik h4x0r3d un dedigi gibi bye bye omnia ;) olacak. Calisirsa size haber veririm. Ilgin icin sagol.

Link to comment
Share on other sites

Guest drorcun
Hocam sanirim Turksun. Tel.im bir turlu boot edemedi. NE bilgisayar ne de octans goruyor onu. Sonunda Kore'ye yolladim. Adamlar tamir edemezse artik h4x0r3d un dedigi gibi bye bye omnia ;) olacak. Calisirsa size haber veririm. Ilgin icin sagol.

çok geçmiş olsun.. inşallah çalışır..

Link to comment
Share on other sites

Guest bilguunbayr
i had the same problem (omnia show picture like on your photo 2). Jebise's way is ok...now my omnia is redy to use

hey mpxxl. sounds you're the lucky guy. i'm steel waiting and praying ;)

Link to comment
Share on other sites

Guest bluhound

Looks like your eBoot is not damaged.

First picture shows that CSC file is corrupted.

Second picture shows that eBoot has started up but found a corrupted OS. It's like on a failsafe mode.

Link to comment
Share on other sites

Guest moxadrian

there should be a way to flash from storage card.I had your problem with an eten x500 and I succeded flashing from sdmmc but the easy way is to go to service if you want to have this device working

Link to comment
Share on other sites

  • 3 weeks later...
  • 4 months later...
Guest bilguunbayr
I have one i8000 Omina II same as to your m715

need J-tag repair it

i think

Hi xiaoyuz, my friend, i think you live in china. i visited beijing, china last month and i didnt find mobile phone repair shop in beijing. if you live in beijing, please tell me where can i go to j-tag repair sevice.

Link to comment
Share on other sites

Guest darkworldzz

try using Sorg's octan's mini to flash stock rom??

the 2.14 octans fails to detect my device sometimes even when its not 'spoilt' but just keep connecting and detecting..(i think you only tried and gave up only after a few tries?) it seems the boot loader still launches..

Link to comment
Share on other sites

  • 1 month later...
Guest moxadrian

1.) Turn of phone take out batter and put it back in.

2.) Download stock PDA(mst file), CSC,phone

3.) Open OCTANS 2.14

4.) Add the stock PDA, CSC file and phone part

5.)Check in octans the options Preserve devices content's and very important the option start downloading immediately

6.) Hit detect

7.) Plug in the phone

8.)Good luck

it worked for me but only if you have the bootloader screen

Link to comment
Share on other sites

  • 2 months later...
Guest larnaca

Hi I tried flashing a friends rom with no good battery and then only the samsung logo comes up, I tried also the other program you say but sometimes it hangs up so I restart it.

and then when i do it again it finishes ok but nothing happens on the phone, please help

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.