87 replies to this topic

[Murshad]

Rapid81, on Apr 19 2010, 23:24, said:

This video shows you how to flash your Omnia 2 under Windows 7 32 & 64bit operating system.

If you follow the video's instructions you can easely flash a new ROM to your PDA.



The programs/drivers what mentioned in the video:
OCTANS_D...er_v2.14.zip
CDMA_Mod...ver_4.34.zip
USB_Driv...86_32bit.zip
USB_Driv...64_64bit.zip

Watch it and happy flashing!

Update:
I attached the X64 driver.
The method is the same, but you need to turn off the Win7's driver signature enforcement:
Restart your computer. At the boot screen, keep pressing F8 and you will be lead into the boot menu, select disable driver signature enforcement and click ok.
After that you can update the MIT driver with the 64bit version.

All things go fine. I have received the Job done. Launched message by octan. But my phone is now not turn on. It only turns on for a second. show samsung omnia II then turns off. Hard reset is also not working? What to do?

[Indian Curry]

Hi,

I have 64 bit and have security enabled at start-up; so can't disable driver signature enforcement; any other workaround for that?

Thanks,

[ijim]

Hi!

Im following this guide using win 7 x64. I installed x64 drivers, cdma driver. I started the update and eboot and previous parts updated fine, but the process stops on: "[MOVINAND:0] Download start 0x0", and nothing happens. In  the phone I can see the ! signal download mode and the green bar is complete. I left the phone all night on that steps but the process dont complete. the log says:

[Setup:0] Device name:6&35b93047&0&3
[Setup:0] PDA Device Found! TimeOut:2
[Setup:0] PDA Device detected. TimeOut:2


Anybody have this same situation? Anybody can help me? thank you in advance!

iJIM

[ingcalrossosa]

ijim, on 04 August 2011 - 04:27 PM, said:

Hi!

Im following this guide using win 7 x64. I installed x64 drivers, cdma driver. I started the update and eboot and previous parts updated fine, but the process stops on: "[MOVINAND:0] Download start 0x0", and nothing happens. In  the phone I can see the ! signal download mode and the green bar is complete. I left the phone all night on that steps but the process dont complete. the log says:

[Setup:0] Device name:6&35b93047&0&3
[Setup:0] PDA Device Found! TimeOut:2
[Setup:0] PDA Device detected. TimeOut:2


Anybody have this same situation? Anybody can help me? thank you in advance!

iJIM

i have the same problem!! how can i solved it? please somebody!

[the-rock]

PROBLEM-HEPL pls..

cannot flash: the phone is stuck with an image of a mobile device, a pc, and a (!) sign in between!

unable to hard reset, unabe to flash - octan does detect the phone, but flash phone image and error (the end)

octan write: [Setup:0] PDA Device removed.
[Setup] Windows XP
[Setup] Download Ram Size :41777920 bytes,(39 MB)
OnDeviceChange \\?\USB#VID_04E8&PID_6619#5&ed04620&0&4#{25dbce51-6c8f-4a72-8a6d-b54c2b4fc835}
[Down] CSC Image.
[Down] MoviNAND Image.
[Down] Phone Image.
[CSC:0] Download start 0x0

[CSC:0] ----------------- Information of Multi CSC Image ------------------
[CSC:0] Verision:[I8000ATOIJ8]
[CSC:0] SalesCode:[ATO]
[CSC:0] Priority:[0x1]
[PDA:0] LANG_ID:[7][0405]
[Phone:0] Download to 0x0
[Phone:0] StartOffset: 0
[Phone:0] EndOffset: 16777216
[MOVINAND:0] Download start 0x0 and all!! :-(

I have win 7 32bit..driver install from modaco..octans (setting XP service pack3), restart..but cannot flash..HELP please? Soory, my bad english...

Edited by the-rock, 21 December 2011 - 02:14 PM.

[the-rock]

Same problems..help please!!!

Edited by the-rock, 21 December 2011 - 04:26 PM.

[skurakai]

Hi all,

is possible make Flashing procedure by bluetooth connection, because i missed usb cable to my Omnia i8000?


Thanks for answer

Edited by skurakai, 17 February 2012 - 11:21 AM.

[Zeeplay9]

skurakai, on 17 February 2012 - 11:19 AM, said:

Hi all,

is possible make Flashing procedure by bluetooth connection, because i missed usb cable to my Omnia i8000?


Thanks for answer

I think NO. Never heard....maybe im mistaken