Anyone know what this is ?

[Guest muttsnutts]

So I searched how to get my Omnia apart to change the digitizer and found a very good photo step by step Anyway to cut a long story short it wasnt clear how to remove a white wire so my question is does any body know what this wire is for?

Edited April 29, 2010 by muttsnutts

[Guest eXen The Cracker]

antenna i think.

[Guest muttsnutts]

Thanks a lot , Ok that answers my question then , after I put everything back I get no signal , Now my next question is where do I get a replacement? Does anybody know? I have searched everywhere

[Guest muttsnutts]

Well ive tried everywhere even Samsung direct about as helpful as a chocolate fireguard Anyway another option does anybody know of a different model that uses that cable? then I can try and get a parts phone Thanks in advance

[Guest muttsnutts]

So now I have the part number so any help would be appreciated Part # QCB01

[Guest kdkinc]

He is a similar guide they may help you out if you do not have it

site I got info from....

http://downloads.ziddu.com/downloadfiles/6...yReassembly.pdf

DisassemblyReassembly.pdf

hope it helps

:huh: :P

Edited May 1, 2010 by kdkinc

[Guest muttsnutts]

Thanks ive already done that part just I need the cable it got broken during the dissassembly

[Guest duycuongn]

it looks like a wifi antenna

[Guest muttsnutts]

Im thinking cell and wifi antenna as now I get NO SIGNAL and cannot pick up wi fi Anyway never the less the cable is broken so I really need to get one from somewhere :huh:

[Guest kawgirlval69]

i just need to ask, what did you do to take it off? how did you damage it? yes it is your antenna. btw exactly how long is the wire? i may have something in my parts bin you can use...

Edited May 3, 2010 by kawgirlval69

[Guest muttsnutts]

I pulled the plug as opposed to lifting it up from the board The picture was a bit misleading

[Guest muttsnutts]

I found one in a scrap Blackjack but the plugs are slightly to big :huh:

[Guest muttsnutts]

Heres the part number and measurement QCB01 COAXIAL CABLE-60MM(GT-I8000) GH39-01359A

[Guest kawgirlval69]

Heres the part number and measurement QCB01 COAXIAL CABLE-60MM(GT-I8000) GH39-01359A

so it is the white cable that is damaged? not the connector on the board what did you do to it as in how is it damaged?.......... and just for giggles could you actually measure it end to end... im tryin to help you here :huh: i may have something close....

Edited May 3, 2010 by kawgirlval69

[Guest muttsnutts]

Its the cable not the socket on the board and like the part number says 60mm The wire came out of the plug :huh:

[Guest kawgirlval69]

Its the cable not the socket on the board and like the part number says 60mm The wire came out of the plug :huh:

sorry i tried it on mine and no go...center pin not right... i do have one off a g1 its a bit long but it fits... you interested?

Edited May 3, 2010 by kawgirlval69

[Guest muttsnutts]

sorry i tried it on mine and no go...center pin not right... i do have one off a g1 its a bit long but it fits... you interested?

If it fits sure I have no choice I really want to use the Omnia again How much longer is it?

[Guest kawgirlval69]

If it fits sure I have no choice I really want to use the Omnia again How much longer is it?

it is the same size connector and is 80mm if you do pm me with your email addy.

[Guest Hammanu666]

You could open the connector back up and crimp the wire back in, The wire is nothing special anything should work if the connector is still reusable.

[Guest muttsnutts]

its a coax cable I tried already no go

[Guest muttsnutts]

it is the same size connector and is 80mm if you do pm me with your email addy.

PM'd

[Guest scherer]

its a coax cable I tried already no go

I'm stuck with exactly the same problem, pulled the cable out of the connector's crimp as i thought it would go off this way (yes, I deserve the giggles). However, I've done some message exchange with the local samsung guys here in austria, to no avail.

Just to save you some efforts: I tried with a replacement from an U-800 "Soul". This has the same connectors, but it is too short. So don't use it!

I'm delighted to have found the part number, so will try with samsung here, let you know what came from it.

In the meantime: does anyone know the official name and maybe manufacturer / part number of the connectors?

[Guest muttsnutts]

As I put in a previous post the part number is GH39-01359A

[Guest muttsnutts]

As I put in a previous post the part number is GH39-01359A

Sorry didnt read you post correctly :) You want the part number for the connector not the complete cable Sorry

[Guest eric2k]

wow i feel bad for guy guys...