Guest sin7 Posted October 28, 2010 Report Share Posted October 28, 2010 If you want to use another rom , the first , you have to extract the kdz using lgutils. Then extract the cab file . Extract the dz file with dzdecryptor . Replace the two files .Create the dz file with dzcreator , create the cab file. Create the kdz file with LG R&D test tool . Then you can flash it to your phone .After flash you will have fastboot . In fastboot mode flash the clockwork recovery to the recovery partition. I have done it with the greek rom. joestone, can you upload greek rom with fastboot? Link to comment Share on other sites More sharing options...
Guest joestone Posted October 28, 2010 Report Share Posted October 28, 2010 (edited) joestone, can you upload greek rom with fastboot? You can download the modified greek rom here : http://addat.hu/181452bf/out.kdz.html Install recovery image according to the original post . If you want to use the black status bar too with the greek rom (based on the russian guys original work, but ported to greek rom) download the update.zip http://addat.hu/293f37f9/update.zip.html . Install the update.zip from recovery mode. The update.zip should be placed to the root of the sdcard . Not fully ported , the framework was only modified , the rom is still odexed. Layar,shazam,sims,app advisor removed. Edited October 28, 2010 by joestone Link to comment Share on other sites More sharing options...
Guest Satans_Hell Posted October 29, 2010 Report Share Posted October 29, 2010 Hi guys, I think I have finally got fastboot working on my phone and pc thanks to this version. When I put in the command "fastboot flash recovery <recovery_clockwork_2.5.0.5_swift>.img" I get the following error: The system cannot find message text for message number 0x2 in the message file for System.?? Link to comment Share on other sites More sharing options...
Guest hugocarmo Posted October 29, 2010 Report Share Posted October 29, 2010 (edited) Hi guys! I´ve modified the Baltic with the two files attached to the russian KDZ file wich enables fastboot on LG GT540, I followed the instructions of Joestone. Here it is: http://hotfile.com/dl/79166227/f0d0eba/V20B_00.kdz.html Peace! Hugo. Edited October 29, 2010 by hugocarmo Link to comment Share on other sites More sharing options...
Guest brqueiros Posted October 29, 2010 Report Share Posted October 29, 2010 Hi guys! I´ve modified the Baltic with the two files attached to the russian KDZ file wich enables fastboot on LG GT540, I followed the instructions of Joestone. Here it is: http://hotfile.com/dl/79166227/f0d0eba/V20B_00.kdz.html Peace! Hugo. Thanks a lot men :) Link to comment Share on other sites More sharing options...
Guest ilovelg Posted October 30, 2010 Report Share Posted October 30, 2010 Hi guys! I´ve modified the Baltic with the two files attached to the russian KDZ file wich enables fastboot on LG GT540, I followed the instructions of Joestone. Here it is: http://hotfile.com/dl/79166227/f0d0eba/V20B_00.kdz.html Peace! Hugo. i just flashed this rom, cant seem to launch fastboot. its camera + Power, right ? Link to comment Share on other sites More sharing options...
Guest hugocarmo Posted October 30, 2010 Report Share Posted October 30, 2010 (edited) i just flashed this rom, cant seem to launch fastboot. its camera + Power, right ? Hi! Sorry you´re right, it´s camera+power button. Can you confirm if it works? Edited October 30, 2010 by hugocarmo Link to comment Share on other sites More sharing options...
Guest ilovelg Posted October 30, 2010 Report Share Posted October 30, 2010 (edited) Hi! Sorry you´re right, it´s camera+power button. Can you confirm if it works? Nope, it dosnt, tryied like 5times. Camera + Power dont get me into fastboot. The ROM works well, i cant get into fastboot only. Edited October 30, 2010 by ilovelg Link to comment Share on other sites More sharing options...
Guest hugocarmo Posted October 30, 2010 Report Share Posted October 30, 2010 Hi again! Well so I compiled the rom again. These are the steps I followed: 1st. Extracted the cab from the baltic KDZ with KP500-utils. 2nd. Extracted the cab with winrar, resulting two files, the DZ file and the phone model dll. 3rd. Extracted the DZ file with Dzdecrypt, resulting a bunch of mbn files. 4th. Replaced the appsboot.mbn and the appsboothd.mbn who were inside the CIS rar. 5th. Created the DZ file with Dvcreate. 6th. Created the KDZ file with UpTestEX.exe (dz and dll). Here it is: http://www.fileserve.com/file/ZZEKKuh I think these are the correct steps for creating any 2.1 rom with fastboot, so can anybody test it, ilovelg in particullar, can you test it if this time you can boot in fastboot mode? Regards!! Hugo. Link to comment Share on other sites More sharing options...
Guest ilovelg Posted October 31, 2010 Report Share Posted October 31, 2010 Hi again! Well so I compiled the rom again. These are the steps I followed: 1st. Extracted the cab from the baltic KDZ with KP500-utils. 2nd. Extracted the cab with winrar, resulting two files, the DZ file and the phone model dll. 3rd. Extracted the DZ file with Dzdecrypt, resulting a bunch of mbn files. 4th. Replaced the appsboot.mbn and the appsboothd.mbn who were inside the CIS rar. 5th. Created the DZ file with Dvcreate. 6th. Created the KDZ file with UpTestEX.exe (dz and dll). Here it is: http://www.fileserve.com/file/ZZEKKuh I think these are the correct steps for creating any 2.1 rom with fastboot, so can anybody test it, ilovelg in particullar, can you test it if this time you can boot in fastboot mode? Regards!! Hugo. I just reinstalled my windows today, had some problems with it... I'll try to test it tommorow. Link to comment Share on other sites More sharing options...
Guest RDilus Posted October 31, 2010 Report Share Posted October 31, 2010 im in fastboot now but no driver found how to fix this one... Link to comment Share on other sites More sharing options...
Guest brqueiros Posted October 31, 2010 Report Share Posted October 31, 2010 Hello people. I'm having some problems with de recovery and I have one doubt. So i have installed the modified greek ROM with fastboot. Then i enter in fastboot mode (camera+power) and after this: you need to write a command for upload recovery fastboot flash recovery <recovery_name>.img http://narod.ru/disk/26369218000/recovery_..._swift.img.html open recovery - HOME+POWER. scrolling menu VOLUME UP/VOLUME DOWN, select item SEND CALL, return/cancel END OF CALL. Is this the right process? Thanks for any help Link to comment Share on other sites More sharing options...
Guest RDilus Posted November 1, 2010 Report Share Posted November 1, 2010 Hi again! Well so I compiled the rom again. These are the steps I followed: 1st. Extracted the cab from the baltic KDZ with KP500-utils. 2nd. Extracted the cab with winrar, resulting two files, the DZ file and the phone model dll. 3rd. Extracted the DZ file with Dzdecrypt, resulting a bunch of mbn files. 4th. Replaced the appsboot.mbn and the appsboothd.mbn who were inside the CIS rar. 5th. Created the DZ file with Dvcreate. 6th. Created the KDZ file with UpTestEX.exe (dz and dll). Here it is: http://www.fileserve.com/file/ZZEKKuh I think these are the correct steps for creating any 2.1 rom with fastboot, so can anybody test it, ilovelg in particullar, can you test it if this time you can boot in fastboot mode? Regards!! Hugo. in DZcreate what phone model you used ? Link to comment Share on other sites More sharing options...
Guest hugocarmo Posted November 1, 2010 Report Share Posted November 1, 2010 in DZcreate what phone model you used ? I used the GT540 model, wich as been provided by the creator of DZcreate somewhere in xda forum. Here are the lines added to DZcreate.ini: [GT540] Chipset=MSM7227 DZVersion=0x03 SplitSize=0x05000000 SubFiles=0x380C3E84 SubFileType03=amss.mbn SubFileType08=partition.mbn SubFileType0A=qcsblhd_cfgdata.mbn SubFileType0B=qcsbl.mbn SubFileType0C=oemsblhd.mbn SubFileType0D=oemsbl.mbn SubFileType0E=amsshd.mbn SubFileType13=appsboothd.mbn SubFileType14=appsboot.mbn SubFileType1C=kernel_ramdisk*.mbn SubFileType1D=system*.mbn SubFileType1E=fwua.mbn Regards! Hugo Link to comment Share on other sites More sharing options...
Guest Satans_Hell Posted November 1, 2010 Report Share Posted November 1, 2010 (edited) Hi guys need help with flashing the recovery image..... 1st post wrote: you need to write a command for upload recovery fastboot flash recovery <recovery_name>.img Questions: 1. Where do I put the recovery_clockwork_2.5.0.5_swift.img file for flashing? 2. What command do I put in the cmd window? I am putting in: fastboot flash recovery <recovery_clockwork_2.5.0.5_swift.img>.img Is this correct, as I get errors?? Edited November 1, 2010 by Satans_Hell Link to comment Share on other sites More sharing options...
Guest brqueiros Posted November 2, 2010 Report Share Posted November 2, 2010 Questions: 1. Where do I put the recovery_clockwork_2.5.0.5_swift.img file for flashing? 2. What command do I put in the cmd window? I am putting in: fastboot flash recovery <recovery_clockwork_2.5.0.5_swift.img>.img Is this correct, as I get errors?? 1. Put in the folder with the files of ADB. 2. fastboot flash recovery recovery_clockwork_2.5.0.5_swift.img Link to comment Share on other sites More sharing options...
Guest Satans_Hell Posted November 2, 2010 Report Share Posted November 2, 2010 1. Put in the folder with the files of ADB. 2. fastboot flash recovery recovery_clockwork_2.5.0.5_swift.img Ha ha ha what a numpty! Can't believe I was that close lol :) :) Thanks for your help. I have sucessfully flashed recovery now :( Link to comment Share on other sites More sharing options...
Guest brqueiros Posted November 2, 2010 Report Share Posted November 2, 2010 Satans_Hell by the way what ROM you used to install the recovery image? Link to comment Share on other sites More sharing options...
Guest Satans_Hell Posted November 3, 2010 Report Share Posted November 3, 2010 Satans_Hell by the way what ROM you used to install the recovery image? It was the ROM that was in the first post of this thread. Link to comment Share on other sites More sharing options...
Guest Satans_Hell Posted November 3, 2010 Report Share Posted November 3, 2010 Hi again! Well so I compiled the rom again. These are the steps I followed: 1st. Extracted the cab from the baltic KDZ with KP500-utils. 2nd. Extracted the cab with winrar, resulting two files, the DZ file and the phone model dll. 3rd. Extracted the DZ file with Dzdecrypt, resulting a bunch of mbn files. 4th. Replaced the appsboot.mbn and the appsboothd.mbn who were inside the CIS rar. 5th. Created the DZ file with Dvcreate. 6th. Created the KDZ file with UpTestEX.exe (dz and dll). Here it is: http://www.fileserve.com/file/ZZEKKuh I think these are the correct steps for creating any 2.1 rom with fastboot, so can anybody test it, ilovelg in particullar, can you test it if this time you can boot in fastboot mode? Regards!! Hugo. I just tried your ROM hugocarmo and it goes into fastboot :) Link to comment Share on other sites More sharing options...
Guest brqueiros Posted November 3, 2010 Report Share Posted November 3, 2010 (edited) To enter in fastboot mode: with the phone off, press camera+power on, right? I'm having troubles to enter in fastboot to install clockworkmod :S I'm using the Greek ROM modified provided by joestone It gives this message: "the system cannot find message text for messenge number 0x2331 in the message file for aplication" Edited November 3, 2010 by brqueiros Link to comment Share on other sites More sharing options...
Guest Satans_Hell Posted November 3, 2010 Report Share Posted November 3, 2010 (edited) To enter in fastboot mode: with the phone off, press camera+power on, right? I'm having troubles to enter in fastboot to install clockworkmod :S I'm using the Greek ROM modified provided by joestone It gives this message: "the system cannot find message text for messenge number 0x2331 in the message file for aplication" That is correct. :) Sometimes mine is temprimental as well. However, I got around it by doing this: Turn your pnone off, once its off plug in the usb cable and then hold camera+power. As soon as you put the usb cable into the phone it starts to turn on so you have to be quick to hold camera+power, but that usually puts it into fastboot mode for me if the other way does not work. :) Edited November 3, 2010 by Satans_Hell Link to comment Share on other sites More sharing options...
Guest hugocarmo Posted November 3, 2010 Report Share Posted November 3, 2010 I just tried your ROM hugocarmo and it goes into fastboot :) Thanks for your feedback Satans_Hell!! :) Link to comment Share on other sites More sharing options...
Guest brqueiros Posted November 3, 2010 Report Share Posted November 3, 2010 (edited) I have used lgutils to extract the kdz of Europe ROM. Then dzdecryptor to extract dz file, replaced files, created a dz file with dzcreator. Now how can I create the cab file to use in the LG R&D test tool to make the new kdz?? Some help please Edited November 3, 2010 by brqueiros Link to comment Share on other sites More sharing options...
Guest brqueiros Posted November 3, 2010 Report Share Posted November 3, 2010 That is correct. :) Sometimes mine is temprimental as well. However, I got around it by doing this: Turn your pnone off, once its off plug in the usb cable and then hold camera+power. As soon as you put the usb cable into the phone it starts to turn on so you have to be quick to hold camera+power, but that usually puts it into fastboot mode for me if the other way does not work. :) Gives the same message "the system cannot find message text for messenge number 0x2331 in the message file for aplication" :( :( :( :lol: :lol: :lol: ;) ;) :D Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now