Guest thund3r Posted November 21, 2010 Report Share Posted November 21, 2010 Hi, I'm using one of the latest versions of S2U2 and I love it... BUT there are some problems using it with i8000... I could solve the default call screen issue that overlaps the S2U call screen. Another problem though is that the wake up alarm starts for a second or doesn't start at all !!! Does anyone else has this problem? If so pls help! 10x! Link to comment Share on other sites More sharing options...
Guest Djibril75 Posted November 24, 2010 Report Share Posted November 24, 2010 Hi, I'm using one of the latest versions of S2U2 and I love it... BUT there are some problems using it with i8000... I could solve the default call screen issue that overlaps the S2U call screen. Another problem though is that the wake up alarm starts for a second or doesn't start at all !!! Does anyone else has this problem? If so pls help! 10x! I have exactly the same problem with the alarm and I dont know how to solve it. Link to comment Share on other sites More sharing options...
Guest wm20320 Posted November 25, 2010 Report Share Posted November 25, 2010 I know that problem! Do you use g-alarm in combination with s2us and spb mobile shell? I think there isn't a solution at all. It's a spb mobil shell problem. Other alarm apps are working fine on my o2. You've just to add the app to the exception-list (settings --> enhanced --> exception EXE list (or so)). Hope I could help you! Link to comment Share on other sites More sharing options...
Guest krizek Posted November 25, 2010 Report Share Posted November 25, 2010 I had the same problem after apptodate G-alarm update. I uninstalled G-Alarm, deleted all ageye data from program files and installed it again -> works fine now. Link to comment Share on other sites More sharing options...
Guest benicillin Posted December 1, 2010 Report Share Posted December 1, 2010 i also had this problem and documented it at http://www.modaco.com/content-page/311262/...0/#entry1458362 i never really found a solution for it, though the solution i posted there did help substantially. the alarm always goes off now, its just sometimes i cant get back to the home screen from the lock screen and i have to hard reset. i dont have the G-alarm or SPB mobile shell or whatever the other posters were referencing above. however, i am using steels rom referenced in the post i linked to above. Link to comment Share on other sites More sharing options...
Guest hoegen Posted August 31, 2011 Report Share Posted August 31, 2011 Another problem though is that the wake up alarm starts for a second or doesn't start at all !!! Does anyone else has this problem? If so pls help! 10x! Same problem here! Anyone ever found a solution for this ? I couldn't find anything useful in benicillin's posts, they seem not to be related to this "alarm sound plays only for the part of a second" problem :/ Link to comment Share on other sites More sharing options...
Guest hoegen Posted September 6, 2011 Report Share Posted September 6, 2011 Fiddeling around with the alarm problem, I think I found a workaround: 1. set your alarm to remind after 1 minute 2. make sure, s2u2 power-off time is set to at least 60 seconds Now what happens: alarm time: phone wakes up, alarm gets cut off after part of a second alarm time +1: phone is still active, alarm sound plays correctly Probably it should also work, if you set the alarm reminder to another value and s2u2 power-off to at least the same. Maybe someone else can try and confirm it works for him/her too. Though still looking for a real fix for this Link to comment Share on other sites More sharing options...
Guest hoegen Posted September 7, 2011 Report Share Posted September 7, 2011 After playing around with s2u2 settings more, I think I found a solution or at least satisfying workaround: Go to s2u2 settings -> advanced -> "on wake up, delay start of s2u2" Default value looks to be 700ms. Switching this to "off" and my alarm is working fine as supposed. PS: I didn't bother to try increasing or decreasing the value, maybe that would work too. I don't see any problems or unwanted side-effects setting it off. Link to comment Share on other sites More sharing options...
Guest Leeds Posted September 12, 2011 Report Share Posted September 12, 2011 After playing around with s2u2 settings more, I think I found a solution or at least satisfying workaround: Go to s2u2 settings -> advanced -> "on wake up, delay start of s2u2" Default value looks to be 700ms. Switching this to "off" and my alarm is working fine as supposed. PS: I didn't bother to try increasing or decreasing the value, maybe that would work too. I don't see any problems or unwanted side-effects setting it off. Thumbs up for this solution, I was also having problems with s2u2+alarm, followed these instructions and the problem is gone Default value on mine was 500ms Thanks hoegen Link to comment Share on other sites More sharing options...
Guest thund3r Posted October 12, 2011 Report Share Posted October 12, 2011 After playing around with s2u2 settings more, I think I found a solution or at least satisfying workaround: Go to s2u2 settings -> advanced -> "on wake up, delay start of s2u2" Default value looks to be 700ms. Switching this to "off" and my alarm is working fine as supposed. PS: I didn't bother to try increasing or decreasing the value, maybe that would work too. I don't see any problems or unwanted side-effects setting it off. So all I need to do is switch off "on wake up, delay start of s2u2" ? Link to comment Share on other sites More sharing options...
Guest thund3r Posted October 13, 2011 Report Share Posted October 13, 2011 Wow hoegen - you are my hero !!! Million 10x for you! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now