446 replies to this topic

[nfranto]

Is possible to flash any 2.2 stock rom to blade from different country? For example is possible to install TFIN_P729BV1.0.0B03 sweden stock rom to hungarian blade?

[groovepeppy]

groovepeppy, on 05 July 2011 - 10:19 AM, said:

hello to all Blade users here, i'm sorry if i'm asking this in the wrong section.
may i know which ROM got the greatest standby time cause i would like to try to use advance restore to put it's boot image to my N880
thank you very much

bump bump bump . . .

[hedgepigdaniel]

nfranto, on 13 July 2011 - 06:51 PM, said:

Is possible to flash any 2.2 stock rom to blade from different country? For example is possible to install TFIN_P729BV1.0.0B03 sweden stock rom to hungarian blade?

While its usually possible, its quite risky. As a general rule, European GSM 2.2 ROMs are all interchangeable. Keep in mind that the stock ROMs overwrite recovery, so if you flash one that doesn't boot at all you will be in a bit of hot water. You will need to flash stock Gen2 firmware to try them here or here, because all the custom layouts don't have enough space on the system partition.

[nfranto]

hedgepigdaniel, on 15 July 2011 - 04:59 AM, said:

While its usually possible, its quite risky. As a general rule, European GSM 2.2 ROMs are all interchangeable. Keep in mind that the stock ROMs overwrite recovery, so if you flash one that doesn't boot at all you will be in a bit of hot water. You will need to flash stock Gen2 firmware to try them here or here, because all the custom layouts don't have enough space on the system partition.

THX, I tried it. It works well except of market. It cannot download. It says starting download > download paused > download unsuccessful. Any proposal to fix it?

[hedgepigdaniel]

nfranto, on 15 July 2011 - 02:14 PM, said:

THX, I tried it. It works well except of market. It cannot download. It says starting download > download paused > download unsuccessful. Any proposal to fix it?

Are you using a non-standard partition layout (particularly one with a very small cache)? I think stock ROMs use it to cache market downloads.

[nfranto]

hedgepigdaniel, on 16 July 2011 - 03:02 AM, said:

Are you using a non-standard partition layout (particularly one with a very small cache)? I think stock ROMs use it to cache market downloads.

Filesystem		 	Size   Used   Free   Blksize
/dev			   	210M	32K   210M   4096
/sqlite_stmt_journals 	4M 	0K 	4M   4096
/mnt/asec			  210M 	0K   210M   4096
/mnt/obb		   	210M 	0K   210M   4096
/system				160M   118M	41M   4096
/data				  294M   126M   167M   4096
/mtdcache				2M 	1M   796K   4096
/cache			 	210M   944K   209M   4096
/mnt/sdcard			  1G   262M 	1G   32768
/mnt/secure/asec	 	1G   262M 	1G   32768

[k0zmic]

groovepeppy, on 15 July 2011 - 02:26 AM, said:

bump bump bump . . .

Best ROM with standby time seems to be Ginger Stir Fry.

@Nfranto

Your cache size is small, it's only 2MB.

I think there was a script that mounts RAM as the cache somewhere which might be able to help you though.

Edited by k0zmic, 16 July 2011 - 11:12 AM.

[hedgepigdaniel]

nfranto, on 16 July 2011 - 08:19 AM, said:

Filesystem	 		Size   Used   Free   Blksize
/dev		   		210M	32K   210M   4096
/sqlite_stmt_journals 	4M 	0K 	4M   4096
/mnt/asec			  210M 	0K   210M   4096
/mnt/obb	   		210M 	0K   210M   4096
/system				160M   118M	41M   4096
/data				  294M   126M   167M   4096
/mtdcache				2M 	1M   796K   4096
/cache		 		210M   944K   209M   4096
/mnt/sdcard			  1G   262M 	1G   32768
/mnt/secure/asec 		1G   262M 	1G   32768

yeah, looks like you are, although from the above is seems to have directed /cache to somewhere with plenty of space. you can try flashing stock Gen2 firmware and reinstalling the ROM to see if it works, but I'm not sure whether that is causing your problem.

[nfranto]

hedgepigdaniel, on 16 July 2011 - 11:14 AM, said:

yeah, looks like you are, although from the above is seems to have directed /cache to somewhere with plenty of space. you can try flashing stock Gen2 firmware and reinstalling the ROM to see if it works, but I'm not sure whether that is causing your problem.

I flashed stock gen2 firmware. Market now working! Thanks guys!

[OlivierBauwens]

oliwek, on 04 May 2011 - 09:19 AM, said:

Hello Sebastian,

I have just bought a "San Francisco" from a Mobistar shop in Brussels two days ago ; currently running Paul r12 froyo ROM, but I can revert back to stock with clockworkmod. Do you already have such a stock ROM from Mobistar (Belgium) and do you need one to help others in the need?

regards,
oliwek

ps. I have no details right now, but stock was a 2.1 rom, with no additional apps from Mobistar that I saw, it looked rather like an unbranded android device, see the following picture :

Hi! I bought the same phone as well, I put the r12 froyo rom as well but my gyroscope/accelerometer/Auto rotate screen,... is not working anymore and I would like to go back to the original Stock Android from Mobistar Belgium as it was working in that rom. I'm kind off desperate to find a dump somewhere, I hope someone can help me :-)

If there is another way to fix the problem with the accelerometer than I'd be more than happy to change to another rom, but Swedish Spring isn't working either for this despite having the option turned on. Does your Mobistar San Francisco work with the auto rotate/landscape mode in another rom or is it just me? :-)

Thank you in advance for reading my problem! :-)

Kind regards,
Olivier

[JimJam707]

I've started to upload these to ROMManager... http://android.modac...-in-rommanager/

[Droid 007]

Can someone please tell me a stable Android 2.3 Gen2 ROM that has call recording capability?

I am new to Android and just put Gen2 Android 2.3 by following another forum thread, however that ROM does not have call recording feature.

[gsam101]

I was wondering: Did anyone dump the French Bouygues Telecom 2.2 ROM ? Or the SFR 2.2 Rom ?

[D4T3N7OD]

Hello,

I did the official Base Lutea update (provider E-Plus/BASE in Germany) on my Gen1 Lutea and
made a ROM dump immediately after. Seems to work okay so far (just 2 days of testing, though).
Still working to get rid of some of the preinstalled crap...

Could the dump be useful for anyone here, to complete the Stock ROM archive?
If yes, where to send it?

From Telephone Info:
Modellnummer: BASE lutea
Android-Version: 2.2.2
Baseband-Version: P729B01
Kernel-Version: 2.6.32.9-perf zte-kernel@Zdroid-SMT
Build-Nummer: FRY_P729KV1.0.0B04

Also ran Mr Pigfish and according to its output, now my phone is Gen2.

romdump wasn´t able to use the root exploit with "wlan on" anymore, but I still could root the phone
using the *983*LOGSET# method

So, in the romdump the permissions of /system/bin/{su,sh} may be incorrect, haven´t checked it.

Greetings,
Datentod

[ksatriapetir]

help, somebody...
need Indonesian ZTE BLADE gen2 stock rom froyo 2.2.2

try to find it anywhere, but can't find it......

[k0zmic]

ksatriapetir, on 18 August 2011 - 05:02 PM, said:

help, somebody...
need Indonesian ZTE BLADE gen2 stock rom froyo 2.2.2

try to find it anywhere, but can't find it......

I don't think I've seen that before.

Is it a GSM or CDMA variant?

[ksatriapetir]

k0zmic, on 18 August 2011 - 05:24 PM, said:

I don't think I've seen that before.

Is it a GSM or CDMA variant?

it's ZTE blade GSM [gen2]

need that badly...


Okay.. my fellow ZTE blade user from Indonesia Dump the rom, and upload it. how to make it flashable?

here's the link

http://upload.ugm.ac...DEV1.0.0B01.rar

i hope someone could help us in Indonesia so the dumped Stock ROM can be Flashable and usefull for the backup, if we failed when flashing custom rom...

thanks anyway...

Edited by ksatriapetir, 19 August 2011 - 05:35 PM.

[wiggum]

Hi, I recently bought ZTE Blade from official czech distribution and I'm trying to dump its ROM through terminal (using install v72 and the tutorial), but when I enter first line i get "cannot create /data/local/install: permission denied". That's not OK, right?

And i can't see the "install" file on sdcard, but it is there, since when I try to copy it again, it is asking me whether i want to overwrite it. (I am copying it into the root of sdcard)

What should I do?

[SlyXo]

Hi, I need help. My internal screen is cracked, it on it just displays some purple lines and the rest is black. I want to send my blade back to Orange.

Original rom: SLOVAK Orange stock (gen1)
Now running: GSF (gen2)


I have clodkwork backup of Slovak Orange rom, but i dont have backup from  romdump.

What should i do?

1) Can I restore my backup of Slovak Orange stock in clockwork? I think no, because now my blade is gen2 and stock rom is gen1.
2) Should I change gen2 to gen1, then restore cwm backup and then remove clowkwork?
3) How to remove clockwork?


Thanks a lot and sorry for my eng.

[Carlos Manuel Leemet]

is there Estonian 2.2 FroYo ROM for Blade?