1042 replies to this topic

[o0ze]

GustavolisA, on 18 September 2011 - 09:42 AM, said:

With problems in Windows Mobile I mean that the device freezes randomly and the clock setting itself to November, 30th 1999 at 01:00 AM, also randomly. My device freezes at least 5 times a day in Windows Mobile.

I have taken some pictures from the wizard, like you've asked. The installation is done like ErnstJanF described in another topic. The wizard starts automatically after booting the device. When trying to sign in my Google Account, I don't get an on screen keyboard, but it is asking me to slide open the keyboard. However, when I do this, it doesn't recognize this...

I had the same thing just skip the step and setup the google account later. After its booted when you start the 'market' you can login there. And the keyboard works properly after that.

[sydney18]

anyone already try the new beta release for automatic install at sd that post on i8000?

any feedback? all things working on b7610? wifi etc.

please i want to know

[erikcas]

sydney18, on 22 September 2011 - 03:57 PM, said:

anyone already try the new beta release for automatic install at sd that post on i8000?

any feedback? all things working on b7610? wifi etc.

please i want to know

Working on it. Does not work yet. I have opened a new thread for it, see forum index.

Wifi is another story. B7610 uses another chip then I8000 does. So development on I8000 does not automatically solve wifi issues for B7610. It has to be developed separate from the I8000 development.

[marzell88]

i have a problem after installing beta2 on mij b7610, i used the sd card installer, and it boots just fine and runs like a charm. however i am not able to enter my sim pin so that i can actualy make a phonecall or anything. i cant find it anywhere on the phone and it also doesnt prompt anything. anyone else has this problem? i need help plz

[gibsonlp]

links don't work for me.i want to download the 512 or 1gb and links are dead

[erikcas]

marzell88, on 23 September 2011 - 09:21 AM, said:

i have a problem after installing beta2 on mij b7610, i used the sd card installer, and it boots just fine and runs like a charm. however i am not able to enter my sim pin so that i can actualy make a phonecall or anything. i cant find it anywhere on the phone and it also doesnt prompt anything. anyone else has this problem? i need help plz

Hi,

Everyone with B7610 has this problem. See issue #160 on google code page
Trying very hard to correct this, getting somewhere but not solved yest

[joseromi]

Hi.
Is this problem solved yet.

I did a lot of research before I ask here. I have an omnia B7610 and I  have installed 2011-10-18: Froyo beta3. Everything is working fine but  Icant make calls. The phone never ask me for the pin code. I tried  everywhere but still the same problem.
I uninstalled Froyo beta 3 and install it 3 times and still same problem.

I need help.

Many thanks

erikcas, on 02 October 2011 - 05:33 PM, said:

Hi,

Everyone with B7610 has this problem. See issue #160 on google code page
Trying very hard to correct this, getting somewhere but not solved yest

[ErnstJanF]

I can't work with android because after 1 reboot I cannot send text messages anymore and have to reinstall. Anyone confirm this?

[erikcas]

joseromi, on 10 November 2011 - 05:26 PM, said:

Hi.
Is this problem solved yet.

I did a lot of research before I ask here. I have an omnia B7610 and I  have installed 2011-10-18: Froyo beta3. Everything is working fine but  Icant make calls. The phone never ask me for the pin code. I tried  everywhere but still the same problem.
I uninstalled Froyo beta 3 and install it 3 times and still same problem.

I need help.

Many thanks

Yes it is download latest update from google projectpagr

[erikcas]

ErnstJanF, on 10 November 2011 - 05:43 PM, said:

I can't work with android because after 1 reboot I cannot send text messages anymore and have to reinstall. Anyone confirm this?

Rebooted 20 times today to try out kernels. Sms is still working

[joseromi]

Could you tell me wich one?
Or post the link because I tryed many of then and the phone never ask me for the pin code.


Many thanks again.

erikcas, on 10 November 2011 - 05:49 PM, said:

Yes it is download latest update from google projectpagr

[erikcas]

joseromi, on 10 November 2011 - 06:27 PM, said:

Could you tell me wich one?
Or post the link because I tryed many of then and the phone never ask me for the pin code.


Many thanks again.

Download beta 3 from http://o2droid.phj.hu/index_en.php
Download rev87 (it has beta3 update 1 included) from http://code.google.c.../downloads/list

good luck

[ErnstJanF]

erikcas, on 10 November 2011 - 05:51 PM, said:

Rebooted 20 times today to try out kernels. Sms is still working

That is VERY strange, as it happens to me after EVERY reboot and each new installation..  Anything that could be causing this problem?
I'm using Internal as 1024MB root (ext4) + 128MB linux-swap + xxMB left as FAT32 for haret.exe, zImage & default.txt
Installed using these packages: ext4.tar.gz (froyob3), REV87 (modified keylayout to LOCK = HOME, W&L = BACK)..

I cannot live without sms..

[erikcas]

ErnstJanF, on 10 November 2011 - 08:52 PM, said:

That is VERY strange, as it happens to me after EVERY reboot and each new installation..  Anything that could be causing this problem?
I'm using Internal as 1024MB root (ext4) + 128MB linux-swap + xxMB left as FAT32 for haret.exe, zImage & default.txt
Installed using these packages: ext4.tar.gz (froyob3), REV87 (modified keylayout to LOCK = HOME, W&L = BACK)..

I cannot live without sms..

I remember you had this sms-problems on previous beta's too? I wouldn't know what causes it, maybe make a logcat?

[ErnstJanF]

erikcas, on 10 November 2011 - 09:11 PM, said:

I remember you had this sms-problems on previous beta's too? I wouldn't know what causes it, maybe make a logcat?

Yes, I did have the problem on all of the beta's..
dmesb didn't give me any output.. can't connect to adb for logcat either as it instant-freezes the phone
Will try again with new REV87 tomorrow (the ADB-part)..

[erikcas]

ErnstJanF, on 10 November 2011 - 09:19 PM, said:

Yes, I did have the problem on all of the beta's..
dmesb didn't give me any output.. can't connect to adb for logcat either as it instant-freezes the phone
Will try again with new REV87 tomorrow (the ADB-part)..

In terminal emulator in dev tools do:
su

logcat > logcat.txt

this will save the output from logcat to the root of your android fs

by
cp logcat.txt /storage

it will be copied to your my storage

[ErnstJanF]

erikcas, on 10 November 2011 - 09:43 PM, said:

In terminal emulator in dev tools do:
su

logcat > logcat.txt

this will save the output from logcat to the root of your android fs

by
cp logcat.txt /storage

it will be copied to your my storage

Why didn't I think of the > parameter will be back soon.. Just reinstalled so i'll have to wait till the problem comes back! probably somewhere tomorrow

[joseromi]

Hi,

I dont know what I am doing wrong but still my phone  omnia B7610 doesn't ask me for the pin code. I follow all the teps and I have android working very smooth but never ask me for the pin code. When I install th version Froyo beta2_1024. The phone ask me for the pin code and I hahe phone line but when I install the new versions Beta 2 or Beta 3 the phone never ask me for the pin code.

I have tried to enable the fly mode but slitt same problem.

Is there any solution?

Thanks

erikcas, on 10 November 2011 - 07:29 PM, said:

Download beta 3 from http://o2droid.phj.hu/index_en.php
Download rev87 (it has beta3 update 1 included) from http://code.google.c.../downloads/list

good luck

[erikcas]

joseromi, on 11 November 2011 - 03:37 PM, said:

Hi,

I dont know what I am doing wrong but still my phone  omnia B7610 doesn't ask me for the pin code. I follow all the teps and I have android working very smooth but never ask me for the pin code. When I install th version Froyo beta2_1024. The phone ask me for the pin code and I hahe phone line but when I install the new versions Beta 2 or Beta 3 the phone never ask me for the pin code.

I have tried to enable the fly mode but slitt same problem.

Is there any solution?

Thanks

Did you apply the latest updatefrom google projectpage?
Can you post the output of dmesg?
howto? well.. Go to dev tools --> terminal emulator

Type:
su (then press enter)
dmesg > /storage/dmesg.txt (then press enter)
reboot to windows, you will have a file called dmesg.txt on your my storage. Post it as an attachment here.

Other questions:
Do you use the auto installer?
When you install beta3 with autoinstaller and you apply the update as should be (so, place the zImage,  and frb3update.tar.gz on your my storage and start haret) does the frb3update.tar.gz disappear from my storage?

[joseromi]

Hi,
I don't know what happened but I was going to follow your intructions so I said I will start from the begining. I removed the ext4 partition with gparted and I have formated the SD card with the mobile aplication. After that I followed again all the steps and I installed froyo beta 2 and then the update from froyo beta 2 to froyo beta 3.
After all the steps I got the screen to insert the pin code. Maybe I had something corrupted on the sd card from the begining.

Anyway many thanks for your help.

This is a great forum.

Thanks

erikcas, on 11 November 2011 - 05:00 PM, said:

Did you apply the latest updatefrom google projectpage?
Can you post the output of dmesg?
howto? well.. Go to dev tools --> terminal emulator

Type:
su (then press enter)
dmesg > /storage/dmesg.txt (then press enter)
reboot to windows, you will have a file called dmesg.txt on your my storage. Post it as an attachment here.

Other questions:
Do you use the auto installer?
When you install beta3 with autoinstaller and you apply the update as should be (so, place the zImage,  and frb3update.tar.gz on your my storage and start haret) does the frb3update.tar.gz disappear from my storage?