please help, currently on jj9 with 2.5.1.8 clockwork, in sebs recovery app do I just press "install firmware" to flash any jj theme?
[Themes]Unified Theme Thread
Started by
Frankish
, Feb 10 2011 04:19 PM
#61
Posted 15 February 2011 - 12:40 AM
ZTE Blade (white+TFT)
Clockwork recovery 3.0.2.7
CM7 110
GEN2 the next generation!
Check out this network and get us both a fiver..

CyanogenMOD 7(2.3.4) Status
Clockwork recovery 3.0.2.7
CM7 110
GEN2 the next generation!
Check out this network and get us both a fiver..

CyanogenMOD 7(2.3.4) Status
#62
Posted 15 February 2011 - 05:53 AM
Fou-lu, on Feb 15 2011, 00:40, said:
please help, currently on jj9 with 2.5.1.8 clockwork, in sebs recovery app do I just press "install firmware" to flash any jj theme?
Not sure as i think it may wipe using that option. Select Boot to recovery and then manually install .zip form sd.
Unified Theme Thread for Blade Currently supporting Japanese Jellyfish, FLB and MCR Froyo roms.
ZTE Blade Theme Porting/Editing Guide. Including other related bits.
ZTE Blade Theme Porting/Editing Guide. Including other related bits.
#63
Posted 15 February 2011 - 06:13 AM
ok thanks, bit of a bother to upgrade to 3.x.x.x clockwork, 2.5.1.8 should work fine? will flash the thin circle gingerbread later then 
ZTE Blade (white+TFT)
Clockwork recovery 3.0.2.7
CM7 110
GEN2 the next generation!
Check out this network and get us both a fiver..

CyanogenMOD 7(2.3.4) Status
Clockwork recovery 3.0.2.7
CM7 110
GEN2 the next generation!
Check out this network and get us both a fiver..

CyanogenMOD 7(2.3.4) Status
#64
Posted 15 February 2011 - 10:13 AM
Big thanks to Frankish for maintaining all these wonderful themes!
I just switched from JJ6 to FLB r8a... and might not have done it without knowing the blue gingerbread circle mod was also available for FLB's
Only annoyance was the incompatibility with RA Recovery. I should have read the 1st post better, could have saved me lots of re-boots and re-flashes which did not work. After downgrading to ClockWork 3 it then worked like a charm. (And yes, going from RA to CWR3 feels like a significant downgrade to me, menus just make much more sense in RA. But well, I don't expect to use the Recovery a lot
)
May I ask why RA Recovery compatibility was removed?
I just switched from JJ6 to FLB r8a... and might not have done it without knowing the blue gingerbread circle mod was also available for FLB's
Only annoyance was the incompatibility with RA Recovery. I should have read the 1st post better, could have saved me lots of re-boots and re-flashes which did not work. After downgrading to ClockWork 3 it then worked like a charm. (And yes, going from RA to CWR3 feels like a significant downgrade to me, menus just make much more sense in RA. But well, I don't expect to use the Recovery a lot
May I ask why RA Recovery compatibility was removed?
Edited by Salsaholic, 15 February 2011 - 10:43 AM.
#65
Posted 15 February 2011 - 10:22 AM
Frankish, on Feb 14 2011, 17:45, said:
No problem but if you have a specific request along the lines of something grey like you wanted i may have time in the next few days to fix something up.
#66
Posted 15 February 2011 - 01:01 PM
rufree2talk, on Feb 15 2011, 10:22, said:
ya sure I'll totally take that too... with this one, everything is fine, but I guess by removing of the modifications for DownloadProvider.apk, the Market notification for "Downloading/Installing xyz" gets lost in white-on-white now... I think you mean to say that the same happens for the "Playing xyz track" notifications also... so a mild grey background would be the best solution in my opinion...
I uploaded a fix for that to turn them back black. Could have sworn I posted it. Also could have sworn I posted steps for flashing using amon ra I'm off to check my posts now lol. If I missed anything ill update later tonight.
Unified Theme Thread for Blade Currently supporting Japanese Jellyfish, FLB and MCR Froyo roms.
ZTE Blade Theme Porting/Editing Guide. Including other related bits.
ZTE Blade Theme Porting/Editing Guide. Including other related bits.
#67
Posted 15 February 2011 - 03:27 PM
Ok, experiments carried out 
I can get a complete theme if I flash JJ9 + patches + theme before booting for the first time. Then go back to recovery and flash 0x90's mod (though thankfully, this way doesn't require data/cache resets). Flashing another theme after the first boot of a freshly flashed rom just doesn't work. Maybe I'm running out of space on the system partition? I'm using one @ 128mb rather than 256
. Or once they're flashed they're marked read only and so subsequent flashes don't wipe over them if they're just adding files. Or something.
I'm still on the last set of themes, so I've moved to the Gingerbread one for functionality reasons, and enjoying every minute of it! Thanks Frankish
I can get a complete theme if I flash JJ9 + patches + theme before booting for the first time. Then go back to recovery and flash 0x90's mod (though thankfully, this way doesn't require data/cache resets). Flashing another theme after the first boot of a freshly flashed rom just doesn't work. Maybe I'm running out of space on the system partition? I'm using one @ 128mb rather than 256
I'm still on the last set of themes, so I've moved to the Gingerbread one for functionality reasons, and enjoying every minute of it! Thanks Frankish
#68
Posted 15 February 2011 - 03:35 PM
Frankish, on Feb 15 2011, 14:01, said:
I uploaded a fix for that to turn them back black. Could have sworn I posted it. Also could have sworn I posted steps for flashing using amon ra I'm off to check my posts now lol. If I missed anything ill update later tonight.
#69
Posted 15 February 2011 - 05:15 PM
just flashed the blue gingerbread theme, no problems with 2.5.1.8..
great work Frankish!
great work Frankish!
ZTE Blade (white+TFT)
Clockwork recovery 3.0.2.7
CM7 110
GEN2 the next generation!
Check out this network and get us both a fiver..

CyanogenMOD 7(2.3.4) Status
Clockwork recovery 3.0.2.7
CM7 110
GEN2 the next generation!
Check out this network and get us both a fiver..

CyanogenMOD 7(2.3.4) Status
#70
Posted 15 February 2011 - 07:46 PM
rufree2talk, on Feb 15 2011, 15:35, said:
you did say "download them from here", but there was no link... are these files in the same folder as the themes too... if so then I guess I'll open the folder at home and let you know... file sharing websites blocked at work 
Ahh crap
The fix for anyone experiencing white on white or black on black text is here. Really this time. This is for anyone using my previous themes that modified Music.apk and DownloadProvider.apk. The files in my .zips are just the stock theme ones now. Please choose correct one for your rom.
Download Music and DownloadProvider fix.
Unified Theme Thread for Blade Currently supporting Japanese Jellyfish, FLB and MCR Froyo roms.
ZTE Blade Theme Porting/Editing Guide. Including other related bits.
ZTE Blade Theme Porting/Editing Guide. Including other related bits.
#71
Posted 16 February 2011 - 07:51 AM
yup there it is... downloaded and flashed and it is all perfect now...
#72
Posted 17 February 2011 - 02:43 PM
Just to confirm these work Flib's R9 release.
Cheers.
Cheers.
#73
Posted 17 February 2011 - 03:48 PM
#74
Posted 17 February 2011 - 06:55 PM
will any of the generation themes work on rls7 jellyfish rom??
#75
Posted 17 February 2011 - 08:23 PM
#76
Posted 17 February 2011 - 09:28 PM
Hello guys.
I installed the Gingerbread Circle mod on my Japanese Jellyfish rls 9 Blade today.
Everything went fine and the theme looked great. But one thing that I noticed is that the theme doesn't fit the screen. Around the screen there is a black border about 1 mm thick.
It's like a poorly adjusted desktop on a computer screen.
So I installed the other Gingerbread theme (the one without the circle battery) but that didn't help, and neither did the stock theme.
So what has happened to my screen and is there a way to fix it?
Thanks.
I installed the Gingerbread Circle mod on my Japanese Jellyfish rls 9 Blade today.
Everything went fine and the theme looked great. But one thing that I noticed is that the theme doesn't fit the screen. Around the screen there is a black border about 1 mm thick.
It's like a poorly adjusted desktop on a computer screen.
So I installed the other Gingerbread theme (the one without the circle battery) but that didn't help, and neither did the stock theme.
So what has happened to my screen and is there a way to fix it?
Thanks.
#77
Posted 18 February 2011 - 03:44 PM
Hey Frankish, why don't you give us CM7 users some thought... 
#78
Posted 18 February 2011 - 05:59 PM
robinhud2010, on Feb 18 2011, 15:44, said:
Hey Frankish, why don't you give us CM7 users some thought... 
I'm also a CM7 user. Due to the rom being so early in development i will not do framework-res based themes as the framework could change a lot. As for the T-Mobile engine themes...i'm not prepared to sit and rename around 1000 png files per theme :S
Unified Theme Thread for Blade Currently supporting Japanese Jellyfish, FLB and MCR Froyo roms.
ZTE Blade Theme Porting/Editing Guide. Including other related bits.
ZTE Blade Theme Porting/Editing Guide. Including other related bits.
#79
Posted 19 February 2011 - 10:12 PM
Amazing work : pinned
#80
Posted 20 February 2011 - 11:30 PM
Using one of your theme, cannot remember witch one. :redface: But i love it. 
Phone: ZTE Blade
Screen: TFT
Rom: JJ RLS9
Launcher: Go Launcher EX
CPU Speed: 691MHz
Hardware Acceleration: Enabled
Screen: TFT
Rom: JJ RLS9
Launcher: Go Launcher EX
CPU Speed: 691MHz
Hardware Acceleration: Enabled
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users







Sign In
Create Account


Back to top









