Jump to content

Swedish Spring RLS4 Respin - Gen 1 and 2 - Lite or Phat


Guest Len Ash

Recommended Posts

Guest Len Ash

Taking kallt_kaffe's latest iteration (NOTE: no real reason to update from RLS3, but ideal to go to Swedish Spring from A.N. Other ROM) and adding/subtracting numerous features.

First variant

This is a light version, intended for simplicity and ease of use.

  • Removed most of the non-phone type apps, these can be selectively added by the user later if desired
  • Removed VM Cache app and nofrills CPU - the ROM now defaults to ondemand governor AND is set to run the stock 600MHz max CPU frequency, but the lower 122.8MHz idle for reduced idle battery consumption
  • HW accel default off - LauncherPro is noticeably smoother with this OFF - can be turned on in kk's "extra settings" app
  • Stagefright ON (not http)
  • Slightly revised GPS and WLAN configs
  • Added updated notification and ringtone sounds
  • Boot animation changed
  • Autobrightness behaviour enhanced
  • Battery Circle mod included
  • Gingerbread Wallpaper added to /system/sd/ for easy adoption
  • Astro replaces Filer
  • Radios removed (neither are great experiences) If you want a reasonable Radio use Andorko's 0.5 version rather than the RDS 0.6 version - seems OK on battery (famous last words)
  • AOSP apps replace the ZTE efforts
  • LauncherPro replaces Launcher2



    Tip: turn window and transition animations in Spare Parts to OFF and in LauncherPro, set both opening speed settings in advanced to 9.

    SS RLS4 AOSP LPro Minimal md5 7f3ac6b348fc4a3e4c8246e2413ab9c2


    Second variant

    Full Phat version as above plus:

    • FB/EBay etc added
    • Google Apps in (Maps/Talk etc)
    • Speedtest added
    • Terminal added
    • VM Tool and nofrills CPU control in
    • Live and Magic Wallpaper in
    • Various other adds like Fancy Widgets
    • Updated Atheros driver from RLS4b added
    • Bootanimation more fluid

    Memory ~137M

    SS RLS4 Full Phat md5 5ebedbfe619a7083b3212d64a332d772

Edited by Len Ash
Link to comment
Share on other sites

Guest wookie16081965
Taking kallt_kaffe's latest iteration (NOTE: no real reason to update from RLS3, but fine to go to RLS4 from A.N. Other ROM) and adding/subtracting numerous features.

First variant:

  • Removed most of the non-phone type apps, these can be selectively added by the user later.
  • Removed VM Cache app and nofrills CPU - the ROM now defaults to ondemand governor AND is set to run the stock 600MHz max CPU frequency, but the lower 122.8MHz idle for reduced idle battery consumption
  • HW accel default off - this can be turned on in kk's "extra settings" app
  • Stagefright ON (not http)
  • Slightly revised GPS and WLAN configs
  • Added updated notification and ringtone sounds
  • Boot animation changed
  • Autobrightness behaviour enhanced
  • Battery Circle mod included
  • Gingerbread Wallpaper added to /system/sd/ for easy adoption
  • Astro replaces Filer
  • Radios removed (neither are great experience)
  • AOSP apps replace the ZTE efforts
  • LauncherPro replaces Launcher2

Memory <110MB

Tip: turn window and transition animations in Spare Parts to OFF and in LauncherPro, set both opening speed settings in advanced to 9.

SS RLS4 AOSP LPro Minimal md5 7f3ac6b348fc4a3e4c8246e2413ab9c2

Thanks Lance ive just flashed rls4 with frankish theme can i just flash this over the top or do i need wipe

Link to comment
Share on other sites

Guest Len Ash
Thanks Lance ive just flashed rls4 with frankish theme can i just flash this over the top or do i need wipe

Yes - you will probably have the ZTE dialler and the contacts will be FUBAR without a wipe.

Link to comment
Share on other sites

Guest wookie16081965
Yes - you will probably have the ZTE dialler and the contacts will be FUBAR without a wipe.

Thanks for quick reply ive flashed rls3 aosp contacts and everything is ok but like most roms better wipe get clean install then can i use frankish themes thankyou for your time

Link to comment
Share on other sites

Guest Hanks6

thanks for the tweaks...will try out SS this weekend. roughly what are the changes to the wifi/gps configs and is the battery indicator the blue circle mod?

Link to comment
Share on other sites

Guest Len Ash
thanks for the tweaks...will try out SS this weekend. roughly what are the changes to the wifi/gps configs and is the battery indicator the blue circle mod?

WLAN - DNS server set to a true global one (Google) instead of a useless Taiwanese one. This generally only has an effect when using Hotspots

GPS - AGPS enabled

(Strangely, Wiper.apk is missing from /app in SS3 and SS4)

Battery indicator is this one:

post-797753-1301734324_thumb.png

Link to comment
Share on other sites

Guest Superfuzz

Tip: turn window and transition animations in Spare Parts to OFF and in LauncherPro, set both opening speed settings in advanced to 9.

I don't really get this. Spare parts option changes every transition effect while the LP settings only go as far as modifying the app drawer opening/closing speed and the home screens preview speed.

Link to comment
Share on other sites

Guest WildeRNS
First variant:

Removed most of the non-phone type apps, these can be selectively added by the user later if desired

Removed VM Cache app and nofrills CPU - the ROM now defaults to ondemand governor AND is set to run the stock 600MHz max CPU frequency, but the lower 122.8MHz idle for reduced idle battery consumption

HW accel default off - LauncherPro is noticeably smoother with this OFF - can be turned on in kk's "extra settings" app

Stagefright ON (not http)

Slightly revised GPS and WLAN configs

Added updated notification and ringtone sounds

Boot animation changed

Autobrightness behaviour enhanced

Battery Circle mod included

Gingerbread Wallpaper added to /system/sd/ for easy adoption

Astro replaces Filer

Radios removed (neither are great experiences)

AOSP apps replace the ZTE efforts

LauncherPro replaces Launcher2

Memory <110MB

Great job!!! I'll try it in monday! thanks a lot!

Link to comment
Share on other sites

Guest TouchyAndalou

The full phat version is looking like a winner, but before flashing I have a couple of questions if you don't mind. Firstly, I prefer the stock battery icon to the circle one, so is this something a newb like myself can restore without too much difficulty? Secondly, don't know if you've seen it, but CM7 has an animation when you hit the lock button that looks like an old television screen cutting out. I like this and would like to use it with SS if possible. Again, is this something that'd be difficult to implement? Cheers, and thanks for sharing your respins.

Link to comment
Share on other sites

Guest Len Ash
The full phat version is looking like a winner, but before flashing I have a couple of questions if you don't mind. Firstly, I prefer the stock battery icon to the circle one, so is this something a newb like myself can restore without too much difficulty? Secondly, don't know if you've seen it, but CM7 has an animation when you hit the lock button that looks like an old television screen cutting out. I like this and would like to use it with SS if possible. Again, is this something that'd be difficult to implement? Cheers, and thanks for sharing your respins.

No intentions to reinstate the stock battery icon at the moment. The clever CM7 animation is probably a bridge too far! One day, one day.

Thanks for the suggestions though

Edited by Len Ash
Link to comment
Share on other sites

Guest DeeLon

Just installed the lite version on my 1st Generation Orange SF - works well so far - I really like the circle Battery Status with the percentage number in the middle

Only had it running a few hours so can't say if battery is better then the last version of Jelly Fish.

But well done to the creator . :D

Is it a good idea to totally wipe my battery stats since this is a new ROM?

Edited by DeeLon
Link to comment
Share on other sites

Guest John Mills

Hello Lance,

I have moved from release 2 direct to 4 and everything is just great except for one issue, that being my camcorder application will not work! It loads for a few seconds and then freezes up. With release 2 everything was fine, no issue at all. I am using the phat version of version 4. I performed a complete wipe and factory reset. I am using clockwork 3.0.0.14 (the latest released version) my phone is an original OLED Orange San Francisco. Please can you see if you can resolve this small problem in the next release as I am sure others must have experienced this problem too. I am not sure if I should post this here or in the 'parent' post for Kalt-Kafe to see. So I will post it in both places, I hope that is fine to do?

Best regards and thanks,

John

Link to comment
Share on other sites

Guest Len Ash
Hello Lance,

I have moved from release 2 direct to 4 and everything is just great except for one issue, that being my camcorder application will not work! It loads for a few seconds and then freezes up. With release 2 everything was fine, no issue at all. I am using the phat version of version 4. I performed a complete wipe and factory reset. I am using clockwork 3.0.0.14 (the latest released version) my phone is an original OLED Orange San Francisco. Please can you see if you can resolve this small problem in the next release as I am sure others must have experienced this problem too. I am not sure if I should post this here or in the 'parent' post for Kalt-Kafe to see. So I will post it in both places, I hope that is fine to do?

Best regards and thanks,

John

Just tried it on both TFT and OLED phones without issue (TFT with Basic apps and OLED with full apps). Have you a) added any apps yourself? or b ) changed ANY settings in nofrills CPU. VMHeap tool or kk's "extra settings"?

Edited by Len Ash
Link to comment
Share on other sites

Guest John Mills
Just tried it on both TFT and OLED phones without issue (TFT with Basic apps and OLED with full apps). Have you a) added any apps yourself? or b ) changed ANY settings in nofrills CPU. VMHeap tool or kk's "extra settings"?

Hi Lance,

I have added no additional apps and have not changed any speed settings or anything in KK's additional settings app. I remember reading on Fibblesan's ROM page that going between versions caused some people to have the same issue... I realise this is a different ROM but I find it strange that this stopped working between releases (2 - 4). Perhaps there is a different component in some of the original Orange San Francisco phones?

Another strange thing is that the camera works okay for me and if anything appears better than before. Did anything change in the code for the video camera that might cause this? I mustn't be the only person with this issue. If I restore back to version 2 the video camera works as before so I don't think this is a problem with my hardware.

Other than this the ROM and your additional add ons are fantastic. In my opinion this is currently the best ROM available for the blade.

Regards and thanks,

John

edit: I just tried to capture a screenshot for you and one other small point I just noticed is that the screenshot tool force closes whenever I try to start it. This is the first time I have launched this application and so I did not see it before.

Link to comment
Share on other sites

Guest sto1911

Hi!

Is there a way to set default CPU settings. I mean the current setting is 604Mhz with ondemand governor, and no matter how hard I try I can't make it back to 600 with ondemand. Every time I manage to set 600 it switches to performance governor... (I also asked this question in the 'official' R4 topic but so far got no attention...)

Link to comment
Share on other sites

Guest Superfuzz
Hi!

Is there a way to set default CPU settings. I mean the current setting is 604Mhz with ondemand governor, and no matter how hard I try I can't make it back to 600 with ondemand. Every time I manage to set 600 it switches to performance governor... (I also asked this question in the 'official' R4 topic but so far got no attention...)

Why, what would be the point, it's only 4 Mhz? I think Kallt_Kaffe already explained this anyway, he said that on stock kernel the 600MHz actually means 598 MHz or smthn, so he changed that.

I'd like to know btw why does NoFrills keeps on closing. Most of the time when I check the running processes it's not there.

Edited by Superfuzz
Link to comment
Share on other sites

Guest sto1911
Why, what would be the point, it's only 4 Mhz? I think Kallt_Kaffe already explained this anyway, he said that on stock kernel the 600MHz actually means 598 MHz or smthn, so he changed that.

I'd like to know btw why does NoFrills keeps on closing. Most of the time when I check the running processes it's not there.

Thanks for the answer.

Would that explain why 600 is the max with other ROMs or why the governor changes every time I change CPU speeds?

Link to comment
Share on other sites

Guest Superfuzz
Thanks for the answer.

Would that explain why 600 is the max with other ROMs or why the governor changes every time I change CPU speeds?

If 600 is the max then that rom probably has overclocking disabled. I don't know why it keeps changing your governor though, maybe it's a NoFrills bug or it has something to do with the ROM's kernel built in frequency and governor options. You can try messing around with SetCPU and see if that helps.

Link to comment
Share on other sites

Guest vrwmiaris

i put lite version and i wanna ask u if this is overclocked or i must add the overclock addon.with setcpu i can change limit to 691 instead of 600

Link to comment
Share on other sites

Guest shanewaz

Great work! Really looking forward to flash this but had a few questions:

Could someone confirm if I am to add on the 'Swedish_Spring_RLS4_aosp_contacts.zip' or the 'Swedish_Spring_RLS3_aosp_contacts.zip' as RLS3 was added by previous poster, but not sure if it was a typo or if they meant it.

Also, am I ok to add on the Swedish_Spring_RLS4_deskclock.zip after, or will this cause a problem?

Also, I know Google maps etc are listed in the full phat vesion, but are the full google apps added in the lite Rom?

Thanks!

Link to comment
Share on other sites

Guest mr_mufy

Hi,

This rom it's great, but lack off the power bar can be perfect.

Does any one can put that function on notifications bar?

I think i found a minor BUG.

I can't put the font more smaller, on the spares parts I put the font to smallest but the config doesn't work.

But congractulations I test all the roms posted on this forum and this it's very good, but please put the options off power bar on this rom.

Link to comment
Share on other sites

Guest Gerry P

Hi, love the ROM - just one question. How can I add live wallpapers into the Lite version they dont show up as selectable in the wallpaper picker.

Thanks,

Gerry

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.