290 replies to this topic

[Bardai]

Well, it seems that nobody can make a real update to any ZTE. It's just a fraud.

[chadgray06]

gud day everyone..can anyone help me how to unbrick my ZTE V9 Light 2.2?..i encountered boot loop when i rooted it to cyanogenmod7..pressing the vol- and power can't help, vol+ and power also can't..help me with this please..

[Fifek]

Sebastian404, on 14 April 2011 - 03:02 PM, said:

A Couple of People have asked me now so here are some more involved instuctions:

1) download the two files from the first post
2) unrar both files to a temporary directory
3) install the Sales_MultiDL_MSM7227_V1.00.01 program
4) download this PATCHED exe (thanks to mrradmir) and place it into the directory you installed MultiDL_MSM7227_V1.00.01
5) run Sales_MultiDL_MSM7227_V1.00.01 program and at the bottom left point it at the location you unrared the larger file
6) remove the usb cable and the battery from your device, wait 10 seconds, put it the battery back in.
7) holding down VOL UP + VOL DOWN press the power button, you will see the power LED flash once
8) now connect the USB cable to your PC
9) using hardware manager find the port for your device and set it in Sales_MultiDL_MSM7227_V1.00.01's setting (read the DOC file for more info)
10) at the bottom of the application under 'File Information' press SW Directory and browse to the 'V9_GENERICV1.0.0B03(offical)' directory
11) in Action Mode tick the 'Backup NV' box and then Press 'Start All'
12) you should find a file called 'Channel1.nvm' in the program directory, take a copy of that
13) back in Action Mode tick the 'Download' box and Press 'Start All' again
14) wait
15) pray


I should mention that using this method, I've managed to get my v9 working again, even tho I screwed it first time around


EDIT:

Some people have reported better results from re-installing a STOCK ROM and then rebooting the device into FTM mode, rather than the method mentioed in step 7...  you might want to give that  go

Everything working with ZTE V9 from polish network P4 (Play)

Divice working faster.

Thanks for tutorial.

Regards.

Fifek

[alpha xs]

Flash Player for Arm7 tested and working (except with opera)

FlashPlayer-10.2.apk (4.41 MB) http://www.multiupload.com/XFT7DVWURY

[mccmmm]

<p>
please link me to the v9 diagnostic drivers ,thank you

</p><p><br></p><p>your help will be much appreciated </p>

Edited by mccmmm, 14 November 2011 - 03:45 AM.

[imran_fool]

Anyone happened to get this??

http://www.engadget....stuff-your-gen/

[blackjack13]

slapnuts, on 15 April 2011 - 06:18 AM, said:

got it running, damn near scared me to death when it wouldn't come out of ftm mode, but works well now.

let me know if you need that file sebastian.

i have the same problem now. it doesn't come out of ftm. what should i do?

[mrhary]

how will i get the FTM Mode back if i flashed the clockwork Recovery to my zte V9?

[sarthi longani]

i finally managed to install CM7 on my ZTE V9C RELIANCE, which initially came shipped with stock 2.3.4 with operator customisations, and carrier SIM lock.

to my great surprise, I am able to use any sim in the tablet now! thanks cyanogen for this

no problems with 3G or GSM data, phone calls or SMS.

my tab has capacitive touch, which seems to work as good as it was.

few issues as of now though, and quite major ones:

1. bluetooth fails to turn on. shows error.

2. no wifi tethering either. error.

3. gps shows the flashing symbol in notification bar, but can't seem to turn it off, no matter what I do.

4. no auto rotation of screen at all.

5. my tablet has a front VGA camera meant for video calls. in the stock 2.3.4, none of the video chat apps were able to recognize it. though the default camera app did. now, I can't seem to find it anywhere. any hopes of getting it to work with skype etc.?

can fixes be applied for these issues? or do I have to wait for another release?

if resolved, I think CM7 will be a successful port onto the V9C too

please help with your suggestions.

thanks in advance.

[sarthi longani]

i finally managed to install CM7 on my ZTE V9C RELIANCE, which initially came shipped with stock 2.3.4 with operator customisations, and carrier SIM lock.

to my great surprise, I am able to use any sim in the tablet now! thanks cyanogen for this

no problems with 3G or GSM data, phone calls or SMS.

my tab has capacitive touch, which seems to work as good as it was.

few issues as of now though, and quite major ones:

1. bluetooth fails to turn on. shows error.

2. no wifi tethering either. error.

3. gps shows the flashing symbol in notification bar, but can't seem to turn it off, no matter what I do.

4. no auto rotation of screen at all.

5. my tablet has a front VGA camera meant for video calls. in the stock 2.3.4, none of the video chat apps were able to recognize it. though the default camera app did. now, I can't seem to find it anywhere. any hopes of getting it to work with skype etc.?

can fixes be applied for these issues? or do I have to wait for another release?

if resolved, I think CM7 will be a successful port onto the V9C too

please help with your suggestions.

thanks in advance.

[AbdoulKader]

Bonjour moi c'est la ZTE light que j'ai et j'ai a peu près le même problème mon téléphone ne démarre plus normalement ni tactile ni écran(illisible) .en fait je me suis tromper de carte memoire et il a booter sur le dossier image qui était dans la carte mémoire comportant une rom de ZTE blade donc ce qui veut dire que j'ai flasher mon phone ZTE light V9 avec une room ZTE BLADE.J'ai le backup de l'ancien version mais si je le place sur ma memoire dans le dossier image ca ne boot pas es ce que je doit convertir ces fichier image qui sont dans le backup pour que ca puisse booter la dessus? dans l'autre mauvais room il ya des fichiers MBN et dans le backup c'est uniquement des fichiers image. Que dois je faire pour retrouver mon phone a son état initial? comment booter directement sur le backup?:
ci joint une capture d'écran du dossier backup et du mauvais dossier que j'ai utilisé par erreur pour le flasher  zte.jpg   115.65K   9 downloads

Merci d'avance!

Edited by AbdoulKader, 04 December 2011 - 01:47 PM.

[adel alkhalili]

Nevertheless I got a problem.
Windows 7 doesn't recognize my ZTE when it is in FTM mode. So it doesn't  get assigned to a COM port (Windows 7 is asking for a driver) and the  flash software won't recognize it.
The ZTE is listed as "ZTE HSUSB Device" with exclamation point in yellow  triangle but not as "ZTE Handset Diagnostic (DFU) (COM XY)" as  described in the Word File.

i don't understood the solution
can any one explain me more
thanks

[beefsteak]

good!!!!

[reborn35]

Help! I recently flashed my 2.2 V9 to CyanogenMod.. then flashed the cm7_zte_v9_ahb_oveclocked kernel and google apps for CM7.. then when i turn on the tablet it's stuck at the ZTE logo.. when i go to recovery only the power button works so i can only select reboot.. i cant do anything with it!

[wsl2011]

Sebastian404, on 14 April 2011 - 12:30 AM, said:

As far as I know there is only the custom 2.1 rom I made, its linked on the other post in this forum...

When you do get the device back, PLEASE PLEASE PLEASE make sure you run rom dump on it, http://android.podtwo.com/romdump/ and share the resulting dump with us..

Hi. Sebastian404. Finally i got my V9 back. But they refused  to reinstall stock rom  because i put unauthorised software on it. So i stll have a device what can't download apps from Market. My questions:
1. Could i still use ROMDUMP and get some useful infos out of it?
2. Could i make the update to 2.2 with this device from Austria?
3. Do You plan to make a custom rom to 2.3?
Thank you for your answer.

[wsl2011]

Hi.
I am not able to switch to FTM Mode.
I tried
A. Remove the battery and reinsert the battery of the unit .
B. Then long press the volume DOWN button first ,then press the power button 3 sec to boot up the device  only. ( KEEP PRESS THE VOLUME DOWN BUTTON UNTIL THE FTM MODE SCREEN PROMT)
either i get the device started or i get in to Recovery.
I need some help.
Thanks

[raniah]

EDIT: The guide seems really good; however, it needs FTM mode.

Unfortunately I had clockworkmod installed, and everytime I boot with vol- + power it gets into clockworkmod recovery menu, so I cannot proceed. Any idea on how to override clockworkmod and get into FTM mode? please?

SOLVED: Use clockworkmod to install a stock rom from
http://android.modac...let-stock-roms/
then boot with vol- + power, it will go into FTM mode.

Edited by raniah, 23 January 2012 - 06:16 PM.

[bakelan]

HI, the links you posted now says

All sharing functionality on FileSonic is now disabled. Our service can only be used to upload and retrieve files that you have uploaded personally. <br style="color: rgb(61, 61, 61); font-family: Tahoma, Arial, Verdana, sans-serif; font-weight: bold; line-height: 20px; background-color: rgb(247, 229, 230); "><br style="color: rgb(61, 61, 61); font-family: Tahoma, Arial, Verdana, sans-serif; font-weight: bold; line-height: 20px; background-color: rgb(247, 229, 230); ">If this file belongs to you, please login to download it directly from your file manager.


can you please provide another links to these files.

Thanks

[wsl2011]

hi, guys.

i finally got my v9 work again, i have now version 2.2 on it. But i can't root it. I tried z4root 1.3 and universal androot 1.6.2 beta 5. nothing works.
Any advice?
Thanks

[Tabman94]

a19074, on 01 July 2011 - 10:35 AM, said:

Update on the above issue with the zte tool not finding armprg.bin  
When I reviewed the error logs from the failed reflash I saw that it was actually looking for the armprgzte.bin file in the sub folder /files so I moved a copy there and tried again, and sure enough it  chugged past the 6/100 marker and went all the way to sucessfully reflash the MYTAB.  
When I tried to restart using KK's patched Optus rom it went straight into FTM mode, so I went back and tried the official 2.2 optus reflash from here http://www.zte.com.au/optus/V9.htm which worked a treat.  I was then able to restart the Tablet into the original 2.2 android with all the glorious bloatware from Optus but at least I could tell I hadn't completely bricked it.

I am still not sure why the CM7 RC1 rom wouldn't work originally, it went into the CM7 boot loop that many have been seeing.

I did try this afternoon to load up KK's earlier RC0 but I am still having troubles.


Would it be possible that the phone memory itself has somehow got a bit screwed up so I don't have enough room for the CM7 to be loaded in there?

My plan tonight is to try one of the repartioning flashes to increase the space available from http://android.modac...imal-cm7-setup/

Hope that helps anyone that comes up a similar error.  Still not sure what went wrong

Were can i find the Armprg.bin File Cause im so close to fix my tab after try to root it and well yea i keep getting that error.