Jump to content


Flashing To ROM with Fastboot - Partially flashed

- - - - -
Started by SrkeeOSK , Apr 20 2011 10:27 AM

  • Please log in to reply
10 replies to this topic

#1
SrkeeOSK
Posted 20 April 2011 - 10:27 AM

SrkeeOSK

    Newbie

  • Members
  • Pip
  • 22 posts
  • Devices:GT540 Optimus
I finnaly found someone who has the same problem.
I do the flashing on a friends phone same as i did on my multiple times SUCCSESFULLY
and KDZ flashes it Ok, but it just loads up same rom. The background is not changed, apps are here but arent working.

i do a hard reset, see that i've lost some languages, means it's flashed but it's not!
I tried even cs-recovery flash and it just wont.

I repeat, i did the processs multiple times on my phone alwyes succsesfully

--->I also updated that very same phome to 2.1 with KDZ when he got it<---


It flashes the phone  but its not flashed. No fastboot. it looks like i'ts partially flashed.

how's that even possible?

Whats the deal with that, i'm getting crazy here?

i will upload a KDZ log if somone knows to check it..

here's normal flash

[19:42:04:863]  : =============================================
[19:42:04:863]  : Log is started on 12.04.2011, at 19:42:04:863, 
executable: C:\flasher\KDZ_FW_UPD.exe (ProcID: 0x00000ed8), 
compile time : Sep  8 2010 17:19:53
[19:42:04:863]  : Version : 
[19:42:04:864]  : strFilename1 = eur

[19:42:04:864]  : m_DlMode = 4, m_strBinaryPath = C:\ProgramData\LGMOBILEAX\Phone\europen+fastboot.dz, m_nSelectedImages= 70787108

[19:42:13:046]  : Start Web Downloading
[19:42:13:046]  : Get Usb Port
[19:42:13:061]  : rsi.strFriendlyName=Communications Port (COM1)

[19:42:13:061]  : Remove Communications Port (COM1)

[19:42:13:061]  : rsi.strFriendlyName=LGE Android USB Serial Port (COM14)

[19:42:13:061]  : FriendlyNameList[iii].szFriendlyName=LGE Android USB Serial Port

[19:42:13:061]  : rsi.strFriendlyName=LGE Android USB GPS NMEA Port (COM13)

[19:42:13:061]  : Remove LGE Android USB GPS NMEA Port (COM13)

[19:42:13:061]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 1 - COM14
[19:42:13:061]  :	Port = COM14
[19:42:13:061]  : Clear
[19:42:13:061]  : Clear
[19:42:13:077]  : >> DIAG_STATUS_F FAILED
[19:42:13:093]  : >>Get Model Name [DIAG_VERNO_F]
[19:42:13:093]  : Clear
[19:42:13:108]  :  strModel = GT540
[19:42:13:108]  : Read NV item:  71	NV ITEM 71 [71]
[19:42:13:108]  : Clear
[19:42:13:124]  :   CSW
[19:42:13:124]  : Banner : CSW
[19:42:13:124]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 0 - GT540
[19:42:13:124]  : >>Get Mobile SW [DIAG_EXT_BUILD_ID_F]
[19:42:13:124]  : Clear
[19:42:13:139]  :   GT540-M76XX-V20a-OCT-05-2010-XX
[19:42:13:139]  : strFilename = GT540-M76XX-V20a-OCT-05-2010-XX

[19:42:13:139]  : strFilename = V20

[19:42:13:139]  : Flag_Phone_BIN_Eclair = TRUE

[19:42:13:139]  : Clear
[19:42:13:155]  : Write NV item:9028	NV ITEM 9028
[19:42:13:155]  : 9028 - NV_DONE_S Item
[19:42:13:264]  : _DloadMode()
[19:42:13:264]  : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_CHANGE_DLOAD 4
[19:42:13:264]  : >>Change Offline Mode [DIAG_CONTROL_F/Mode = 1]
[19:42:13:264]  : Clear
[19:42:13:280]  : >>Change Dload Mode [DIAG_DLOAD_F]
[19:42:13:280]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - DLOAD
[19:42:13:280]  : Clear
[19:42:13:280]  : 2_DIAG_DLOAD_F DLOAD_RESET_F do not wait for response
[19:42:13:280]  : #ifdef FEATURE_L4

[19:42:13:280]  : Clear
[19:42:13:280]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - Close Port
[19:42:13:280]  : Close Port<<
[19:42:53:281]  : Clear
[19:42:53:281]  : EMERGENCY Booting Mode
[19:42:53:281]  : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[19:42:53:281]  : Clear
[19:42:53:281]  : Clear
[19:42:53:292]  :   BS/GT540/7D
[19:42:53:292]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 0 - GT540
[19:42:53:292]  : m_pPhoneCtrl->m_pDload->Dl_GetCommMode(&m_pPhoneCtrl->m_pDload->m_nCommMode)

[19:42:53:292]  : >> GET DLOAD COMM MODE
[19:42:53:292]  : Clear
[19:42:53:292]  : Clear
[19:42:53:293]  : [GetCommMode] Communication mode : 2
[19:42:53:293]  : Pre Nand Download
[19:42:53:293]  : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[19:42:53:293]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - TRUSTED MODE
[19:42:53:293]  : Clear
[19:42:53:293]  : Clear
[19:42:53:294]  : [COM14] >>NandFlashInitWithFile(PARTITION TBL), BinType =8
[19:42:53:294]  : NandFlashInitWithFile :: LG3GBinaryList[BinType].szBinaryTypeName = PARTITION TBL, BinType = 8
[19:42:53:294]  : NandFlashInitWithFile ::
[19:42:53:294]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - INIT PARTITION TBL
[19:42:53:294]  : Clear
[19:42:53:294]  : Clear
[19:42:53:305]  : Clear
[19:42:53:305]  : Clear
[19:42:53:306]  : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_WRITE_TO_SDRAM 3
[19:42:53:306]  : m_nSelectedImages= 70787108,Type= 3

[19:42:53:306]  : [COM14] ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_WRITE_AMSS 15
[19:42:53:306]  : [COM14] >>NandFlashInitWithFile(AMSS MODEM HEADER), BinType =14
[19:42:53:306]  : NandFlashInitWithFile :: LG3GBinaryList[BinType].szBinaryTypeName = AMSS MODEM HEADER, BinType = 14
[19:42:53:306]  : NandFlashInitWithFile ::
[19:42:53:309]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - INIT AMSS MODEM HEADER
[19:42:53:309]  : Clear
[19:42:53:309]  : Clear
[19:42:53:320]  : >> AMSS FLASHING ...
[19:42:53:321]  : ¸Ţ˝ĂÁö ş¸łż ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[19:42:53:321]  : Sending Pkt Seq : 0
[19:42:53:321]  : Clear

[19:42:53:322]  : Sending Pkt Seq : 1
[19:42:53:322]  : Sending Pkt Seq : 2
[19:42:53:322]  : Sending Pkt Seq : 3

NOW IT SENDs TO....

[19:45:36:342]  : Sending Pkt Seq : 114437
[19:45:36:342]  : Sending Pkt Seq : 114438
[19:45:36:342]  : Tx packet : Last packet sequence : 114439 
[19:45:36:342]  : Sending Pkt Seq : 114439
[19:45:36:364]  : _Reset_N_Close bFirst = 1
[19:45:36:364]  : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_RESET_THE_PHONE_1ST 8
[19:45:36:364]  : [COM14] Reset [DLOAD]
[19:45:36:364]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - RESET
[19:45:36:675]  : Clear
[19:45:36:675]  : Clear
[19:45:36:675]  : 2_DIAG_DLOAD_F DLOAD_RESET_F do not wait for response
[19:45:36:976]  : Clear
[19:45:36:976]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - Close Port
[19:45:36:976]  : Close Port<<
















here's a part of CS_RECOVERY flash:

[23:30:26:873]  : =============================================
[23:30:26:873]  : Log is started on 19.04.2011, at 23:30:26:873, 
executable: C:\Android\KDZ_FW_UPD.exe (ProcID: 0x00001580), 
compile time : Sep  1 2010 21:09:05
[23:30:26:873]  : Version : 
[23:30:26:873]  : strFilename1 = v20

[23:30:26:873]  : m_DlMode = 4, m_strBinaryPath = C:\ProgramData\LGMOBILEAX\Phone\v20b.dz, m_nSelectedImages= 70787108

[23:30:34:236]  : Start Web Downloading
[23:30:34:236]  : Get Usb Port
[23:30:34:267]  : rsi.strFriendlyName=Communications Port (COM1)

[23:30:34:267]  : Remove Communications Port (COM1)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM6)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM6)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM7)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM7)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM11)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM11)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM12)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM12)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM54)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM54)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM56)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM56)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM57)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM57)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM53)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM53)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM58)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM58)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM52)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM52)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM4)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM4)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM5)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM5)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM9)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM9)

[23:30:34:267]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM10)

[23:30:34:267]  : Remove Standard Serial over Bluetooth link (COM10)

[23:30:34:267]  : rsi.strFriendlyName=Standard Modem over Bluetooth link #12

[23:30:34:267]  : Remove Standard Modem over Bluetooth link #12

[23:30:34:267]  : rsi.strFriendlyName=Standard Modem over Bluetooth link #13

[23:30:34:267]  : Remove Standard Modem over Bluetooth link #13

[23:30:34:267]  : rsi.strFriendlyName=Standard Modem over Bluetooth link #11

[23:30:34:267]  : Remove Standard Modem over Bluetooth link #11

[23:30:34:267]  : rsi.strFriendlyName=Standard Modem over Bluetooth link

[23:30:34:267]  : Remove Standard Modem over Bluetooth link

[23:30:34:267]  : rsi.strFriendlyName=Standard Modem over Bluetooth link #2

[23:30:34:267]  : Remove Standard Modem over Bluetooth link #2

[23:30:34:267]  : rsi.strFriendlyName=LGE Android USB Serial Port (COM14)

[23:30:34:267]  : FriendlyNameList[iii].szFriendlyName=LGE Android USB Serial Port

[23:30:34:267]  : rsi.strFriendlyName=LGE Android USB GPS NMEA Port (COM13)

[23:30:34:267]  : Remove LGE Android USB GPS NMEA Port (COM13)

[23:30:34:267]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 1 - COM14
[23:30:34:267]  :	Port = COM14
[23:30:34:267]  : Clear
[23:30:34:267]  : Clear
[23:30:34:283]  : >> DIAG_STATUS_F FAILED
[23:30:34:299]  : >>Get Model Name [DIAG_VERNO_F]
[23:30:34:299]  : Clear
[23:30:34:314]  :  strModel = GT540
[23:30:34:314]  : Read NV item:  71	NV ITEM 71 [71]
[23:30:34:314]  : Clear
[23:30:34:330]  :   CSW
[23:30:34:330]  : Banner : CSW
[23:30:34:330]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 0 - GT540
[23:30:34:330]  : >>Get Mobile SW [DIAG_EXT_BUILD_ID_F]
[23:30:34:330]  : Clear
[23:30:34:345]  :   GT540-M76XX-V20b-SEP-13-2010-XX
[23:30:34:345]  : strFilename = GT540-M76XX-V20b-SEP-13-2010-XX

[23:30:34:345]  : strFilename = V20

[23:30:34:345]  : Flag_Phone_BIN_Eclair = TRUE

[23:30:34:345]  : Clear
[23:30:34:361]  : Write NV item:9028	NV ITEM 9028
[23:30:34:361]  : 9028 - NV_DONE_S Item
[23:30:34:470]  : _DloadMode()
[23:30:34:470]  : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_CHANGE_DLOAD 4
[23:30:34:470]  : >>Change Offline Mode [DIAG_CONTROL_F/Mode = 1]
[23:30:34:470]  : Clear
[23:30:34:486]  : >>Change Dload Mode [DIAG_DLOAD_F]
[23:30:34:486]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - DLOAD
[23:30:34:486]  : Clear
[23:30:34:486]  : 2_DIAG_DLOAD_F DLOAD_RESET_F do not wait for response
[23:30:34:486]  : #ifdef FEATURE_L4

[23:30:34:486]  : Clear
[23:30:34:486]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - Close Port
[23:30:34:486]  : Close Port<<
[23:31:14:490]  : Clear
[23:31:14:490]  : EMERGENCY Booting Mode
[23:31:14:490]  : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[23:31:14:490]  : Clear
[23:31:14:490]  : Clear
[23:31:14:506]  :   BS/GT540/7D
[23:31:14:506]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 0 - GT540
[23:31:14:506]  : m_pPhoneCtrl->m_pDload->Dl_GetCommMode(&m_pPhoneCtrl->m_pDload->m_nCommMode)

[23:31:14:506]  : >> GET DLOAD COMM MODE
[23:31:14:506]  : Clear
[23:31:14:506]  : Clear
[23:31:14:521]  : [GetCommMode] Communication mode : 2
[23:31:14:521]  : Pre Nand Download
[23:31:14:521]  : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[23:31:14:521]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - TRUSTED MODE
[23:31:14:521]  : Clear
[23:31:14:521]  : Clear
[23:31:14:537]  : [COM14] >>NandFlashInitWithFile(PARTITION TBL), BinType =8
[23:31:14:537]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - INIT PARTITION TBL
[23:31:14:537]  : Clear
[23:31:14:537]  : Clear
[23:31:14:552]  : Clear
[23:31:14:552]  : Clear
[23:31:14:568]  : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_WRITE_TO_SDRAM 3
[23:31:14:568]  : m_nSelectedImages= 70787108,Type= 3

[23:31:14:568]  : [COM14] ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_WRITE_AMSS 15
[23:31:14:568]  : [COM14] >>NandFlashInitWithFile(AMSS MODEM HEADER), BinType =14
[23:31:14:568]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - INIT AMSS MODEM HEADER
[23:31:14:568]  : Clear
[23:31:14:568]  : Clear
[23:31:14:584]  : >> AMSS FLASHING ...
[23:31:14:584]  : ¸Ţ˝ĂÁö ş¸łż ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[23:31:14:584]  : Sending Pkt Seq : 0
[23:31:14:584]  : Clear

NOW SENDING PKT
.....
[23:31:14:942]  : Sending Pkt Seq : 276
[23:31:14:942]  : Sending Pkt Seq : 277
[23:31:14:942]  : Sending Pkt Seq : 278
[23:31:14:942]  : Sending Pkt Seq : 279
.....

[23:33:39:820]  : Tx packet : Last packet sequence : 103474 
[23:33:39:820]  : Sending Pkt Seq : 103474
[23:33:39:851]  : Same Version DL BIN & Phone BIN

[23:33:39:851]  : _Reset_N_Close bFirst = 1
[23:33:39:851]  : ¸Ţ˝ĂÁö ş¸łż TYPE_WPARAM_RESET_THE_PHONE_1ST 8
[23:33:39:851]  : [COM14] Reset [DLOAD]
[23:33:39:851]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - RESET
[23:33:40:163]  : Clear
[23:33:40:163]  : Clear
[23:33:40:163]  : 2_DIAG_DLOAD_F DLOAD_RESET_F do not wait for response
[23:33:40:475]  : Clear
[23:33:40:475]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - Close Port
[23:33:40:475]  : Close Port<<
[23:34:20:478]  : Clear
[23:34:20:478]  : Clear
[23:34:20:478]  : Clear
[23:34:20:493]  :	 Error in DLOAD MODE : Req(12) -> Rsp(19)
[23:34:20:493]  : Clear
[23:34:20:509]  :	 Error in DLOAD MODE : Req(12) -> Rsp(19)
[23:34:20:509]  : Clear
[23:34:20:525]  :	 Error in DLOAD MODE : Req(12) -> Rsp(19)
[23:34:20:525]  : >> DIAG_STATUS_F FAILED
[23:34:20:540]  : >>Get Model Name [DIAG_VERNO_F]
[23:34:20:540]  : Clear
[23:34:20:556]  :  strModel = GT540
[23:34:20:556]  : Read NV item:  71	NV ITEM 71 [71]
[23:34:20:556]  : Clear
[23:34:20:571]  :   CSW
[23:34:20:571]  : Banner : CSW
[23:34:20:571]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 0 - GT540
[23:34:20:571]  : Clear
[23:34:20:587]  : Write NV item:9028	NV ITEM 9028
[23:34:20:587]  : 9028 - NV_DONE_S Item
[23:34:20:587]  : Clear
[23:34:20:587]  : WM_COPYDATA ¸Ţ˝ĂÁö ş¸łż 3 - Close Port
[23:34:20:587]  : Close Port<<
[23:34:20:587]  : ¸Ţ˝ĂÁö ş¸łż - TYPE_WPARAM_UPGRADE_OK
[23:34:22:631]  : Log finished


now what's this:

[23:34:20:493]  :     Error in DLOAD MODE : Req(12) -> Rsp(19)
[23:34:20:493]  : Clear
[23:34:20:509]  :     Error in DLOAD MODE : Req(12) -> Rsp(19)
[23:34:20:509]  : Clear
[23:34:20:525]  :     Error in DLOAD MODE : Req(12) -> Rsp(19)

#2
despotovski01
Posted 20 April 2011 - 11:12 AM

despotovski01

    Enthusiast

  • Members
  • PipPipPip
  • 234 posts
  • Gender:Male
  • Location:Macedonia
  • Devices:LG GT540
  • Twitter:@despotovski01
Looks like you have some errors. Try my backup, which is flashable through recovery. Link: http://android.modac...-eclair-backup/

Edited by despotovski01, 20 April 2011 - 11:13 AM.

#3
JackG
Posted 20 April 2011 - 03:41 PM

JackG

    Regular

  • Members
  • PipPip
  • 73 posts
  • Location:/dev/null
  • Interests:Gaming<br />Modding<br />Computers and that
  • Devices:LG Optimus GT540 White
  • Twitter:@JackG256

View Postdespotovski01, on Apr 20 2011, 12:12, said:

Looks like you have some errors. Try my backup, which is flashable through recovery. Link: http://android.modac...-eclair-backup/
He can't flash the backup because fastboot is unavailable. His phone still has life, but he may have corrupted the bootloader so it won't write files to the bootloader partition.

Jack

LG Fixed my phone ^_^
Considering a voided the warranty, they fixed it!

#4
JackG
Posted 20 April 2011 - 03:49 PM

JackG

    Regular

  • Members
  • PipPip
  • 73 posts
  • Location:/dev/null
  • Interests:Gaming<br />Modding<br />Computers and that
  • Devices:LG Optimus GT540 White
  • Twitter:@JackG256
Here is something you can try:
Download the LG Update tool from here: http://www.lg.com/uk...one-support.jsp
Once its loaded go to: Customer Support-> Recovery Phone type your IMEI number in (Found under battery or side of box)
I haven't tried this but I found it somewhere on XDA if you phone gets stuck at LG screen, thats ok! Just flash a fastboot rom with KDZ and you should be ok.

Hope it helps,
Jack

LG Fixed my phone ^_^
Considering a voided the warranty, they fixed it!

#5
despotovski01
Posted 20 April 2011 - 07:07 PM

despotovski01

    Enthusiast

  • Members
  • PipPipPip
  • 234 posts
  • Gender:Male
  • Location:Macedonia
  • Devices:LG GT540
  • Twitter:@despotovski01

View PostJackG, on Apr 20 2011, 17:41, said:

He can't flash the backup because fastboot is unavailable. His phone still has life, but he may have corrupted the bootloader so it won't write files to the bootloader partition.

Jack
You can install recovery with Terminal Emulator using these codes:
su
cd /sdcard
chmod 755 flash_image
./flash_image recovery /sdcard/recovery.img

Edited by despotovski01, 20 April 2011 - 07:08 PM.

#6
JackG
Posted 20 April 2011 - 11:02 PM

JackG

    Regular

  • Members
  • PipPip
  • 73 posts
  • Location:/dev/null
  • Interests:Gaming<br />Modding<br />Computers and that
  • Devices:LG Optimus GT540 White
  • Twitter:@JackG256

View Postdespotovski01, on Apr 20 2011, 20:07, said:

You can install recovery with Terminal Emulator using these codes:
su
cd /sdcard
chmod 755 flash_image
./flash_image recovery /sdcard/recovery.img
Sorry I read it wrong, I thought his phone was unable to boot -.-

Jack

LG Fixed my phone ^_^
Considering a voided the warranty, they fixed it!

#7
SrkeeOSK
Posted 21 April 2011 - 10:55 AM

SrkeeOSK

    Newbie

  • Members
  • Pip
  • 22 posts
  • Devices:GT540 Optimus
@despotovski

Can you give me sime more info about that way of installing recovery.
If KDZ cant  will recovery installed that way be able to flash a SwiftDroid 1.8 backup i created with my phone.

Im  afraid that if recovery installed on an  uunusual way on  the phone that acts so wierd  will do the restore partially like KDZz
And mess up the phone totally. Its not mine phone.

Ccan  you give me a little more detailed guide for terminal flashimg?

Thanks un advance

#8
despotovski01
Posted 22 April 2011 - 05:18 PM

despotovski01

    Enthusiast

  • Members
  • PipPipPip
  • 234 posts
  • Gender:Male
  • Location:Macedonia
  • Devices:LG GT540
  • Twitter:@despotovski01

View PostSrkeeOSK, on Apr 21 2011, 12:55, said:

@despotovski

Can you give me sime more info about that way of installing recovery.
If KDZ cant  will recovery installed that way be able to flash a SwiftDroid 1.8 backup i created with my phone.

Im  afraid that if recovery installed on an  uunusual way on  the phone that acts so wierd  will do the restore partially like KDZz
And mess up the phone totally. Its not mine phone.

Ccan  you give me a little more detailed guide for terminal flashimg?

Thanks un advance
The flashing won't screw up anything. It will just flash recovery. Run the commands in order:
su
cd /sdcard
chmod 755 flash_image
./flash_image recovery /sdcard/recovery.img

Be sure to put your recovery.img in /sdcard/, and most importantly, YOU MUST BE ROOTED!
Link for recovery 2.5.1.8: http://www.mediafire...hl44m6pqzx8s27n
For 3.0.2.4: http://www.mediafire...511onap95wh90zv
You should use recovery 2.5.1.8 if you plan to install 2.2 or my 2.1 backup. You should use 3.0.2.4 for Gingerbread.

#9
SrkeeOSK
Posted 25 April 2011 - 11:12 AM

SrkeeOSK

    Newbie

  • Members
  • Pip
  • 22 posts
  • Devices:GT540 Optimus
okay, tried it, can't find the file..

this phone sucks.

i put the clockwork_recovery_3.img in the sdcard root

root the device, reboot

run emulator

make myself root user

and then he just writed no file, or no permission to do that,

i enabled ALL permissions, restart the device still samo

tryed 3 more guides over internet, almost the same, but nothing

in the meantime i upgraded two more GT540 from stock 16 to 2.3.3 and from stock 2.1 to 2.3.3 - NO PROBLEMS same computer everything same.

i quit. this phone can not be regularly flashed. there's something wrog, i guess with the hardware.

#10
despotovski01
Posted 25 April 2011 - 01:37 PM

despotovski01

    Enthusiast

  • Members
  • PipPipPip
  • 234 posts
  • Gender:Male
  • Location:Macedonia
  • Devices:LG GT540
  • Twitter:@despotovski01

View PostSrkeeOSK, on Apr 25 2011, 13:12, said:

okay, tried it, can't find the file..

this phone sucks.

i put the clockwork_recovery_3.img in the sdcard root

root the device, reboot

run emulator

make myself root user

and then he just writed no file, or no permission to do that,

i enabled ALL permissions, restart the device still samo

tryed 3 more guides over internet, almost the same, but nothing

in the meantime i upgraded two more GT540 from stock 16 to 2.3.3 and from stock 2.1 to 2.3.3 - NO PROBLEMS same computer everything same.

i quit. this phone can not be regularly flashed. there's something wrog, i guess with the hardware.
Rename the recovery image recovery.img

#11
SrkeeOSK
Posted 25 April 2011 - 04:46 PM

SrkeeOSK

    Newbie

  • Members
  • Pip
  • 22 posts
  • Devices:GT540 Optimus

View Postdespotovski01, on Apr 25 2011, 14:37, said:

Rename the recovery image recovery.img

will try, but it should work with filename...

Back to LG GT540 Optimus - GT540.MoDaCo.com


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

  1. MoDaCo
  2. → Device Specific - Android Phones
  3. → LG
  4. → LG GT540 Optimus - GT540.MoDaCo.com