I've done an official upgrade to 2.2 on the V9
used z4root special edition to permanent root. worked fine.
used recovery manager also worked fine.
and finaly used clockwork 184.108.40.206 wich is for the Gen2 and that worked fine too,
but then i made a mistake and flashed with a Gen1 ROM
<<< r12-update-modacocustomrom-blade-kitchen-unsigned.zip >>>
Now it's just stuck on the green andriod screen. waited even up to 1 hour still no luck.
Vol - and start button wont bring clockwork back on the screen.
have removed battery and rebooted many times, yet no luck.
Any Ideas how to get Clockwork back on Please.
Try this... Power up with volume-down pressed. You won't get FTM and you won't get into Clockwork but it will put the device in a mode where it can be flashed.
First the try the offcial upgrade, it may work to use it to redo the upgrade.
If it complains then I have extracted the flashable files from the official Optus MyTab upgrade so that they can be used with the hacked flasher.
Get this and unpack it: http://www.mediafire...hap4qm0lr2ugw1p
With the device still in "programmable" mode connect it to your computer and use device manager to find out what COM port it is using. It's will say something about Diagonstic port and/or DFU.
Now configure the hacked flasher to use this port (Option->Port Config) and you will see one of the ports change to from "Open" to "Ready".
Check "Backup NV" and then press "Starta All". This will create a Channel1.nvm that you should make a copy of just in case you loose your IMEI.
Now set it back to to "Download" press "SW Directory" and point it to the "files" folder which contains all the .mbn and .img files.
Press "Start All" and it will reflash your phone with the official Optus MyTab 2.2 update. The update process usally takes 3-4 minutes.
And btw, your mistake was not only that you flashed a Gen1 ROM. You flashed a Blade ROM. Blade ROMs are NOT the same as V9/Light ROMs even though they are very similar.
Edited by kallt_kaffe, 15 May 2011 - 09:47 AM.