94 replies to this topic

[equiliym]

TigTex, on Jun 4 2011, 12:53, said:

yesterday I made one working 2.6.32 but once again the touchscreen doesn't work. I can't touch anything. But screen works at 100%.
I beleive that with 2.6.35 the camera won't work, i also tried to make one and touchscreen doesn't work...

well yeah, its in the readme.. but its worth a try, someone might fix it.. doubt it tho but you may never know

Quote

Both points 4 and 5 above are broken SO NO CAMERA.. and anyway tis crappy!

[isziraki]

TigTex, on Jun 4 2011, 13:53, said:

yesterday I made one working 2.6.32 but once again the touchscreen doesn't work. I can't touch anything. But screen works at 100%.
I beleive that with 2.6.35 the camera won't work, i also tried to make one and touchscreen doesn't work...

Use this
CONFIG_TOUCHSCREEN_SYNAPTICS=y
It must work.

[TigTex]

isziraki, on Jun 4 2011, 21:46, said:

Use this
CONFIG_TOUCHSCREEN_SYNAPTICS=y
It must work.

That line doesn't even exist...
All you have is
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI

and also doesn't work.

Please i really need you help with this. If anyone managed to make the touchscreen work tell me how he did it. I need a COMPLETE .CONFIG to compare with mine and see what is wrong.
I only want configs that you tested AND WORKS....

Looks that i cant update the kernel on the new release of the rom that i'm doing... maybe later.

rexchun or any friend, if you read this please PM me.

[isziraki]

TigTex

There are my last config & kernel update.
I hope it helps for you.

 kernel.zip   3.34MB   35 downloads

Somewhere I saw this
CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y
CONFIG_TOUCHSCREEN_CYPRESS_I2C_RMI=y

I used it my first kernel.

Edited by isziraki, 04 June 2011 - 10:23 PM.

[isziraki]

I install 3UK rom after I install kernel update. Everything works properly.

I install Ricky nightly & kernel update. It works properly but keyboard has same problem.

I make new boot with TigTex kitchen. I change only kernel. I put it on my cm rom. I install it. I get a new start screen. I didn't look this screen before. Choice setup wizard & touchscreen doesn't work.

I don't understand what have I made wrong? Doesn't kernel update change the whole kernel? I use koush-AnyKernel.
There are kernel updates in my previous reply.

Has anybody any idea?

Thanks.

This rom worked
http://android.modac...-ready/page/20/
post #31

I could get kernel config from it.
 Ricky_config.zip   12.81K   11 downloads
I compare it with my.
I think it uses another source. I don't know witch.

Edited by isziraki, 05 June 2011 - 02:07 PM.

[TigTex]

It uses a modified source. Blade + mooncake files. That's the source that I need, it makes the touchscreen work also.

sebastian404 made one similar to that
https://github.com/s...04/blade-kernel

but touchscreen won't work like all the others. I bet that msm_ts.c needs to be modified

If they had respected the GPL, we wouldn't be having this trouble right now...

i'm using this config right now, touchscreen doesnt work (check attachment)

Attached Files

•  test1.config.txt   51.56K   14 downloads

Edited by TigTex, 05 June 2011 - 02:46 PM.

[deadlink]

I wrote a simple script to compare configs. I think many will be useful.
And i found how to make the touchscreen work without editing msm_ts. If possible, lay out the sources later.

A tool for comparing configs by deadlink

Upd: updated link

Edited by deadlink, 06 June 2011 - 10:59 AM.

[rickywyatt]

deadlink, on Jun 6 2011, 11:45, said:

I wrote a simple script to compare configs. I think many will be useful.
And i found how to make the touchscreen work without editing msm_ts. If possible, lay out the sources later.

A tool for comparing configs by deadlink

hi could you upload your build kernel so we can test it for you

[deadlink]

rickywyatt, on Jun 6 2011, 10:53, said:

hi could you upload your build kernel so we can test it for you

Camera doesn't work. And touchscreen have some bugs. I fix msm_ts yesterday, but today i found another way to fix touchscreen without changing msm_ts driver. If possible with a touchscreen, maybe upload it tonight

[deadlink]

New experimental kernel
based on zte blade 2.6.32.9
improved touchscreen calibration
improved system performance

Known issues:
- camera doesn't work on any racer

This is still very experimental code!! Try at your own risk!

 test_kernel.zip   3.25MB   50 downloads

[buzzhaina]

deadlink, on Jun 7 2011, 04:53, said:

New experimental kernel
based on zte blade 2.6.32.9
improved touchscreen calibration
improved system performance

Known issues:
- camera doesn't work on any racer

This is still very experimental code!! Try at your own risk!

test_kernel.zip

Just tried it... noticeable improvement with touchscreen n performance:d camera no go:-Pas u mentioned it

[rickywyatt]

@deadlink i tryed your kernel its the best so far but i still find the touchscreen still no good when typing
will you be able to fix the home home,menu,back without having touch_to_key?

[Sebastian404]

deadlink, on Jun 6 2011, 12:04, said:

Camera doesn't work. And touchscreen have some bugs. I fix msm_ts yesterday, but today i found another way to fix touchscreen without changing msm_ts driver. If possible with a touchscreen, maybe upload it tonight

you care to share the changes you made?  so others might improve on your work?

[deadlink]

Quote

will you be able to fix the home home,menu,back without having touch_to_key?

I can rewrite the driver, but do not think it reasonable. Touch_to_key is a good decision. Maybe I'll do this later.

Sebastian404, on Jun 7 2011, 18:32, said:

you care to share the changes you made?  so others might improve on your work?

Of course I share the sources. Can you add them to your repository?

 sources.zip   32.31K   37 downloads

[Sebastian404]

deadlink, on Jun 7 2011, 21:09, said:

Of course I share the sources. Can you add them to your repository?

Ok, I have added the changes....  commit

[TigTex]

I've compiled a new kernel, based on the current cyanogenmod blade kernel because sebastian404's kernel is incomplete (smartass for example, doesn't work, corrupts the boot).

Using this kernel

https://github.com/T...ernel_zte_blade

And the mooncake files, I've made one optimized version, with PERFECT SCREEN CALIBRATION!.

1 problem that needs to be solved: camera still doesn't work. No more problems apart that one.
The config is almost equal to the blade's .config. So this is using the smartass cpu governor by default for best performance ever.

Attach below. feel free to test the kernel. Make sure you have the old kernel ready to reflash if you need it.

Attached Files

•  update.zip   3.25MB   40 downloads

Edited by TigTex, 07 June 2011 - 10:14 PM.

[Sebastian404]

TigTex, on Jun 7 2011, 23:13, said:

I've compiled a new kernel, based on the current cyanogenmod blade kernel because sebastian404's kernel is incomplete (smartass for example, doesn't work, corrupts the boot).

Its not really 'my' kernel, its a fork from KK's...   who is a Cyanogenmod developer......  I'd assume his was the same as TomG's

TigTex, on Jun 7 2011, 23:13, said:

Using this kernel

https://github.com/T...ernel_zte_blade

And the mooncake files, I've made one optimized version, with PERFECT SCREEN CALIBRATION!.

would you care to share what files you have modified from TomG's kernel?

Edited by Sebastian404, 07 June 2011 - 10:29 PM.

[TigTex]

Sebastian404, on Jun 7 2011, 23:26, said:

Its not really 'my' kernel, its a fork from KK's...
would you care to share what files you have modified from TomG's kernel?

Just use the tomg's kernel + the zipped files and you get a perfect working kernel. No camera though.

config and files attached

Attached Files

•  kernel_mooncake.zip   47.95K   33 downloads
•  config.txt   51.87K   38 downloads

Edited by TigTex, 07 June 2011 - 10:31 PM.

[buzzhaina]

TigTex, on Jun 8 2011, 03:43, said:

I've compiled a new kernel, based on the current cyanogenmod blade kernel because sebastian404's kernel is incomplete (smartass for example, doesn't work, corrupts the boot).

Using this kernel

https://github.com/T...ernel_zte_blade

And the mooncake files, I've made one optimized version, with PERFECT SCREEN CALIBRATION!.

1 problem that needs to be solved: camera still doesn't work. No more problems apart that one.
The config is almost equal to the blade's .config. So this is using the smartass cpu governor by default for best performance ever.

Attach below. feel free to test the kernel. Make sure you have the old kernel ready to reflash if you need it.

Yep best performance:D

[deadlink]

TigTex, on Jun 7 2011, 22:30, said:

Just use the tomg's kernel + the zipped files and you get a perfect working kernel. No camera though.

You use old mooncake-board    In my fresh mooncake-board, which I have upload above, the camera works. There is a device /dev/msm_camera/. But I do not know why app not working. And i think that using smartass reduce battery life...