223 replies to this topic

[fards]

Vdd has voltage and smoothass tweaks,
vrscheduler is same kernel with a vr scheduler included
Unless specifically stated kernels are usually incremental based on the kernel version before.




I've rebuilt the last kernel (which has 12v car charging and adb working as well)
on my 64 bit machine for sake of comparison with the one built on the 32 bit machine I posted earlier.



(When I upload it)

Attached Files

•  12v_64bit_boot.img   3.21MB   16 downloads

Edited by fards, 22 July 2011 - 08:57 AM.

[Adam Mallinson]

So is this latest kernel the same as VR one but with 12v and ADB?

If so does it matter whether you use 32bit or 64bit one?

[fards]

Adam Mallinson, on 22 July 2011 - 05:00 PM, said:

So is this latest kernel the same as VR one but with 12v and ADB?

If so does it matter whether you use 32bit or 64bit one?

it shouldn't matter, but I found a slight mistake in the 64 bit build tonight, so use the 32bit

[Adam Mallinson]

Hi Fards

Just wonder how you are progressing with your kernels?

I have been using this build for a little while now and have to say im impressed how stable it is and how speedy it seems (w O/C). Getting a good solid day out of the battery, sometimes even more.

Keep up the good work

[fards]

Adam Mallinson, on 01 August 2011 - 10:51 PM, said:

Hi Fards

Just wonder how you are progressing with your kernels?

I have been using this build for a little while now and have to say im impressed how stable it is and how speedy it seems (w O/C). Getting a good solid day out of the battery, sometimes even more.

Keep up the good work

AWD_maniac and I have been working on the sensors, trying to get them working as they do with the passion code from the AOSP (ie properly according to how google do it),theres been some progress but not really enough yet..

I've been tweaking lots, I discovered the "random reboots" are being caused by a kernel panic on oops, disabling the reboot when that happens gets rid of it, giving the os a chance to recover, but there's been a couple of times when its just blackscreened rather than rebooted.  

try these in the init.streak.post_boot.sh
if it does hang, then change the panic_on_oops 0 to 1

mount -t debugfs debugfs /sys/kernel/debug
echo 32 > /sys/kernel/debug/msm_fb/0/bpp
echo 0 > /sys/kernel/debug/msm_fb/0/hw_vsync_mode
echo 0 > /sys/kernel/debug/msm_fb/0/vsync_enable
echo 4 > /sys/kernel/debug/msm_fb/0/backbuff
echo 1 > /sys/power/wake_lock
echo 1 > /sys/kernel/debug/kgsl/cache_enable
insmod /system/lib/modules/aes_generic.ko
insmod /system/lib/modules/ansi_cprng.ko
insmod /system/lib/modules/cpaccess.ko
insmod /system/lib/modules/cryptoloop.ko
#insmod /system/lib/modules/gspca_main.ko
#insmod /system/lib/modules/evbug.ko
insmod /system/lib/modules/qce.ko
insmod /system/lib/modules/qcedev.ko
insmod /system/lib/modules/qcrypto.ko
insmod /system/lib/modules/twofish_common.ko
insmod /system/lib/modules/twofish.ko
#insmod /system/lib/modules/cpufreq_smartass.ko
#insmod /system/lib/modules/cpufreq_smoothass.ko
#insmod /system/lib/modules/cpufreq_interactive.ko

echo 8192 > /sys/block/mmcblk1/queue/read_ahead_kb
echo 128 > /sys/block/mmcblk1/queue/max_sectors_kb
echo 8192 > /sys/block/innersd0/queue/read_ahead_kb
#echo 128 > /sys/block/innersd0/queue/max_sectors_kb 
echo 0 > /proc/sys/vm/swappiness
echo 0 > /proc/sys/vm/oom_kill_allocating_task
echo 0 > /proc/sys/kernel/sched_child_runs_first
echo 1 > /proc/sys/vm/overcommit_memory
echo 0 > /proc/sys/kernel/panic_on_oops
echo 1000 > /proc/sys/vm/dirty_writeback_centisecs
echo 500 > /proc/sys/vm/dirty_expire_centisecs
echo 8192 > /proc/sys/vm/min_free_kbytes
echo 95 > /proc/sys/vm/dirty_ratio
echo 60 > /proc/sys/vm/dirty_background_ratio
echo 10 > /proc/sys/vm/vfs_cache_pressure
echo "1536,2560,5120,6144,7680,10240" > /sys/module/lowmemorykiller/parameters/minfree 

Edited by fards, 02 August 2011 - 08:27 AM.

[Adam Mallinson]

Glad to see your still making progress on it and still busy tweaking away, would love for this to be a fully working build.

Do those lines want adding to the end of the existing init file or replacing everything in the init file?

[fards]

Adam Mallinson, on 02 August 2011 - 08:09 PM, said:

Glad to see your still making progress on it and still busy tweaking away, would love for this to be a fully working build.

Do those lines want adding to the end of the existing init file or replacing everything in the init file?

replace should be ok

[fards]

ok after far too long swearing at the screen, and with a HUGE amount of work put in by AWD_Maniac here's a

KERNEL WITH COMPASS!

that means it rotates, maps work properly and other stuffs like that..

what doesn't work..
proximity sensor, light sensor, beer sensor..  (mine seems to be lacking that function anyway)


there's three files. boot image,  flash with fastboot

sensors.8x50.so that needs to go system/lib/hw (and chmod 644)


also there's a libsensorservice but I don't think thats needed..


please test for stability

Edited by fards, 04 August 2011 - 10:37 PM.

[Azurren]

fards, on 04 August 2011 - 10:17 PM, said:

ok after far too long swearing at the screen, and with a HUGE amount of work put in by AWD_Maniac here's a

KERNEL WITH COMPASS!

that means it rotates, maps work properly and other stuffs like that..

what doesn't work..
proximity sensor, light sensor, beer sensor..  (mine seems to be lacking that function anyway)


there's three files. boot image,  flash with fastboot

sensors.8x50.so that needs to go system/lib/hw (and chmod 644)


also there's a libsensorservice but I don't think thats needed..


please test for stability

Im really looking forward to a more final release!
I would really love to test your release now but I rely on my streak as my phone, satnav and as my trusted beer detector

[Adam Mallinson]

fards, on 04 August 2011 - 10:17 PM, said:

ok after far too long swearing at the screen, and with a HUGE amount of work put in by AWD_Maniac here's a

KERNEL WITH COMPASS!

that means it rotates, maps work properly and other stuffs like that..

what doesn't work..
proximity sensor, light sensor, beer sensor..  (mine seems to be lacking that function anyway)


there's three files. boot image,  flash with fastboot

sensors.8x50.so that needs to go system/lib/hw (and chmod 644)


also there's a libsensorservice but I don't think thats needed..


please test for stability

Flashing this now, will let you know how i get on. If it does need the libsensorservice where should it go?

Also what sensors does this include?

[fards]

Adam Mallinson, on 06 August 2011 - 01:27 PM, said:

Flashing this now, will let you know how i get on. If it does need the libsensorservice where should it go?

Also what sensors does this include?

you dont need libsensorservice.


ecompass and gsensor

[Adam Mallinson]

So far have tested the accelerometer which appears to be working perfectly well.

Having some issues with BBC iPlayer (app and website) when trying to play videos though, the streak locks up and either force restarts or i have to take the battery out to get it to restart. I am still using the old init.streak.post_boot.sh file though, dont know if that would make a difference so will try the new one today and update further then

[Adam Mallinson]

Tested some more today and appears stable but battery drain (for me at least) is dramatically increased from your 12v kernel one

[bouncingdonkey]

I still have an issue of the dell not detecting nonstock earphones. I'm wondering if it's due to this rom.

[Adam Mallinson]

bouncingdonkey, on 20 August 2011 - 01:32 AM, said:

I still have an issue of the dell not detecting nonstock earphones. I'm wondering if it's due to this rom.

I think it is as it looks for a certain pin configuration on the headphones.

There is a widget you can use to force output through the headphones instead called ToggleHeadset2 on the market

Toggle Headset 2 - Android Market Website

[bouncingdonkey]

Thanks for that Adam!

[popetodd]

Wow, this is all getting a bit convoluted now.
There are several flash's to get this far now, are they all required (as in flash every file in this thread in order) or is there a specific set of files that can be tossed on without having to run through every iteration to get here?

[Adam Mallinson]

Just the StreakDroid 2.0 file (first post)

Then Fards First Patch ( Post 168 in this thread ) - Either file as i think they are a mirror

Then the Kernel with Compass ( Post 208 in this thread )

Also useful to replace the init.streak.post_boot.sh file with the contents of the one in Fards post ( Post 205 in this thread )

Edited by Adam Mallinson, 24 August 2011 - 10:16 PM.

[RichB93]

What is this like in terms of usability and stability now? Is it as fast as SimpleStreak?

[Adam Mallinson]

RichB93, on 25 August 2011 - 07:18 PM, said:

What is this like in terms of usability and stability now? Is it as fast as SimpleStreak?

Pretty usable and stable, seems to be some issues with some apps, seems to be flash video related but could be wrong.

Not used SimpleStreak so cant really comment, maybe someone else can assist with that part