84 replies to this topic

[t0mm13b]

Someone in the Skate forum can go here :

Evtest prog

Download the file port_cwm_gui.zip

And follow the instructions of the readme.txt

We'll need these infos to port the mod for the Skate

[t0mm13b]

t0mm13b, on 04 September 2011 - 06:06 PM, said:

Someone in the Skate forum can go here :

Evtest prog

Download the file port_cwm_gui.zip

And follow the instructions of the readme.txt

We'll need these infos to port the mod for the Skate

Anyone?

Bump

[tilal6991]

t0mm13b, on 05 September 2011 - 12:49 PM, said:

Anyone?

Bump

Ill check today.

[tilal6991]

Linux localhost 2.6.35.7-perf++ #6 PREEMPT Sat Sep 3 12:50:13 BST 2011 armv6l GNU/Linux

/dev/input/event0 is touchscreen

Input driver version is 1.0.0
Input device ID: bus 0x0 vendor 0x0 product 0x0 version 0x0
Input device name: "synaptics-rmi4-ts"
Supported events:
  Event type 0 (Sync)
  Event type 1 (Key)
Event code 102 (Home)
Event code 139 (Menu)
Event code 158 (Back)
Event code 330 (Touch)
  Event type 3 (Absolute)
Event code 33 (?)
   Value   0
   Min     0
   Max     5
Event code 34 (?)
   Value   0
   Min     0
   Max     5
Event code 35 (?)
   Value   0
   Min     0
   Max     5
Event code 36 (?)
   Value   0
   Min     0
   Max     5
Event code 37 (?)
   Value   0
   Min     0
   Max     5
Event code 38 (?)
   Value   0
   Min     0
   Max     5
Event code 39 (?)
   Value   0
   Min -255
   Max   255
Event code 48 (?)
   Value   0
   Min     0
   Max   255
Event code 50 (?)
   Value   0
   Min     0
   Max   30
Event code 52 (?)
   Value   0
   Min     0
   Max     0
Event code 53 (?)
   Value   0
   Min     0
   Max 1144
Event code 54 (?)
   Value   0
   Min     0
   Max 1864
Event code 57 (?)
   Value   0
   Min     0
   Max   10
Testing ... (interrupt to exit)

[t0mm13b]

tilal6991, on 05 September 2011 - 05:16 PM, said:

Linux localhost 2.6.35.7-perf++ #6 PREEMPT Sat Sep 3 12:50:13 BST 2011 armv6l GNU/Linux

/dev/input/event0 is touchscreen

Input driver version is 1.0.0
Input device ID: bus 0x0 vendor 0x0 product 0x0 version 0x0
Input device name: "synaptics-rmi4-ts"
Supported events:
  Event type 0 (Sync)
  Event type 1 (Key)
Event code 102 (Home)
Event code 139 (Menu)
Event code 158 (Back)
Event code 330 (Touch)
  Event type 3 (Absolute)
Event code 33 (?)
   Value   0
   Min     0
   Max     5
Event code 34 (?)
   Value   0
   Min     0
   Max     5
Event code 35 (?)
   Value   0
   Min     0
   Max     5
Event code 36 (?)
   Value   0
   Min     0
   Max     5
Event code 37 (?)
   Value   0
   Min     0
   Max     5
Event code 38 (?)
   Value   0
   Min     0
   Max     5
Event code 39 (?)
   Value   0
   Min -255
   Max   255
Event code 48 (?)
   Value   0
   Min     0
   Max   255
Event code 50 (?)
   Value   0
   Min     0
   Max   30
Event code 52 (?)
   Value   0
   Min     0
   Max     0
Event code 53 (?)
   Value   0
   Min     0
   Max 1144
Event code 54 (?)
   Value   0
   Min     0
   Max 1864
Event code 57 (?)
   Value   0
   Min     0
   Max   10
Testing ... (interrupt to exit)

Brilliant! Thanks a million for that - will have some news on that tomorrow (it will be beta so will need a beta-tester or two!)

Cheers,



P.S: What ROM is that and would you know the device tree for the skate so that I can integrate into the build?

Edited by t0mm13b, 05 September 2011 - 11:47 PM.

[tilal6991]

t0mm13b, on 05 September 2011 - 10:05 PM, said:

Brilliant! Thanks a million for that - will have some news on that tomorrow (it will be beta so will need a beta-tester or two!)

Cheers,



P.S: What ROM is that and would you know the device tree for the skate so that I can integrate into the build?

CM 7.

[t0mm13b]

Hi, okie, this is BETA, so you've been warned

Download the file from Phoenix's server here.

The filename to try out this is photom_cwm_update_skate.zip.

Flash it using the existing recovery and please let me know how you get on?

Cheers,

Edited by t0mm13b, 08 September 2011 - 10:59 AM.

[philmein]

t0mm13b, on 08 September 2011 - 10:58 AM, said:

Hi, okie, this is BETA, so you've been warned

Download the file from Phoenix's server here.

The filename to try out this is photom_cwm_update_skate.zip.

Flash it using the existing recovery and please let me know how you get on?

Cheers,

im afraid it does not boot stuck on the green android  when i try to get clockwork ( tried holding vol down method and  reboot widget) phone boots ok if i do not press vol-   had to reflash pauls cwm

[t0mm13b]

philmein, on 08 September 2011 - 02:49 PM, said:

im afraid it does not boot stuck on the green android  when i try to get clockwork ( tried holding vol down method and  reboot widget) phone boots ok if i do not press vol-   had to reflash pauls cwm

Cheers for that test

I will unpack pauls cwm, replace the binary and repack it again and take it from there...

Stay tuned

[t0mm13b]

Please try again by referring back to post #27.

What I did - Unpacked Pauls CWM zip, replaced the binary for the recovery, re-packed it.

Fingers crossed....

[philmein]

t0mm13b, on 08 September 2011 - 03:18 PM, said:

Please try again by referring back to post #27.

What I did - Unpacked Pauls CWM zip, replaced the binary for the recovery, re-packed it.

Fingers crossed....

still not working same problem  green android only    btw using MCR pauls rom

Edited by philmein, 08 September 2011 - 03:36 PM.

[t0mm13b]

philmein, on 08 September 2011 - 03:35 PM, said:

still not working same problem  green android only    btw using MCR pauls rom

Oo

Now am stumped! Did not change the kernel... wtf!

Does the command adb devices return anything when that is plugged in with clockworkmod stuck on boot screen with green android... ?

What identifier does the lsusb normally give for MCR ROM that is up and running as normally...?

What base address does the rom load from?

So many questions....

Cheers for your patience in helping us

[philmein]

it may be best if somebody tries it who has blueginger custom rom instead of pauls MCR

Does the command adb devices return anything when that is plugged in with clockworkmod stuck on boot screen with green android... ?

What identifier does the lsusb normally give for MCR ROM that is up and running as normally...?



sorry this bit is a bit beyond me sorry i cannot be of more help

Edited by philmein, 08 September 2011 - 03:52 PM.

[t0mm13b]

Would anyone care to try out this version of the mod of CWM?

Unzip it, plug in the cable, and issue this command

adb reboot bootloader

then finally, use fastboot

fastboot flash recovery recovery.img

Please let me know how you get on?

Cheers,

Attached Files

•  photom_recovery_skate_beta.zip   3.86MB   2 downloads

Edited by t0mm13b, 29 September 2011 - 08:10 PM.

[t0mm13b]

Bump

[philmein]

t0mm13b, on 30 September 2011 - 12:37 PM, said:

Bump

just having a bash now

[philmein]

any chance of a cwm version seem to be having issues with fast boot  dos screen vanishes after a second

[t0mm13b]

philmein, on 30 September 2011 - 01:54 PM, said:

any chance of a cwm version seem to be having issues with fast boot  dos screen vanishes after a second

Here's the attached Clockwork script to flash the new version

Please do let me know how you get on.

Cheers

Attached Files

•  photom_cwm_update_skate.zip   3.98MB   1 downloads

[philmein]

the clockwork shows up with new batt indicator but the resolution is very bad and no movement with vol+ vol- or the touch controls  used pauls cmw installer and changed img files

[t0mm13b]

philmein, on 30 September 2011 - 04:25 PM, said:

the clockwork shows up with new batt indicator but the resolution is very bad and no movement with vol+ vol- or the touch controls  used pauls cmw installer and changed img files

??
Can you explain what you said there?

What do you mean by "resolution is very bad"? It would be appreciated if you could include a screenshot, remember I am playing blind here and do not know.

The skate's resolution is 800x480 right?