Well guys, I had an I900 Omnia with a code I could increase the volume of the device and got an Omnia last 2 weeks and decided to test with it and it worked,see the procedure below:
On the telephone keypad, enter the code: * # 0002 * 28346 #
Will appear several setup functions: Speaker, Earphone, Voice and others, willchange them at its discretion.
I increased the master volume of the headset (earphone):
Choose: Music = 3p Earphone for MP3 music and click GAIN
This displays various functions, I will come down only what they altered and had avery good result:
1 - Output Volume Control (08h)
L1VL ~ 2: 111 - let this
HPG7 ~ 4: 1111 - left with this
2. Lout 3 Power Management (11h)
L3VL7 ~ 6: 11 - left with this
3 - LCH OutPut Volume Control (1Ah)
OVL7 ~ 0: 00001111 - left with this
4 - OutPut Rch Volume Control (1Bh)
OVR7 ~ 0: 00010100 - left with this
When you finish setting, simply log out or exit.
To obtain this configuration, I recommend leaving a volume 3 with music so you can immediately see the result in each change.
IMPORTANT: Be careful to overdo the volume, it may damage your headset, speakers on the unit or your own hearing!
Recalling that the build up made for headphones, but speakers of the device the procedure is the same.
You can increase volume of FM, incoming call voice among others.
Good luck!
Note: This tutorial is of my own! (user: GSMFans= Valhd)
On the telephone keypad, enter the code: * # 0002 * 28346 #
Will appear several setup functions: Speaker, Earphone, Voice and others, willchange them at its discretion.
I increased the master volume of the headset (earphone):
Choose: Music = 3p Earphone for MP3 music and click GAIN
This displays various functions, I will come down only what they altered and had avery good result:
1 - Output Volume Control (08h)
L1VL ~ 2: 111 - let this
HPG7 ~ 4: 1111 - left with this
2. Lout 3 Power Management (11h)
L3VL7 ~ 6: 11 - left with this
3 - LCH OutPut Volume Control (1Ah)
OVL7 ~ 0: 00001111 - left with this
4 - OutPut Rch Volume Control (1Bh)
OVR7 ~ 0: 00010100 - left with this
When you finish setting, simply log out or exit.
To obtain this configuration, I recommend leaving a volume 3 with music so you can immediately see the result in each change.
IMPORTANT: Be careful to overdo the volume, it may damage your headset, speakers on the unit or your own hearing!
Recalling that the build up made for headphones, but speakers of the device the procedure is the same.
You can increase volume of FM, incoming call voice among others.
Good luck!
Note: This tutorial is of my own! (user: GSMFans= Valhd)







Sign In
Create Account

Back to top









