63 replies to this topic

[tillaz]

spigot, on 04 October 2011 - 07:25 PM, said:

And how do I do rooting with Android 2.3.5?

you cant yet.... but you can flash one of available roms (they are all rooted on 2.3.4)

i'm sure i will be available very soon tho...

Edited by tillaz, 04 October 2011 - 08:27 PM.

[philmein]

think i may have borked my omc put on one of the stock skate roms i cannot get back into clock work just FTM mode flashed pauls superboot coz rom was not rooted  any help tilaz

[wrtease]

just leave it conected to pc and run the clockwork stuff i did this earlier and worked fine okay ,ps dont forget to eject the drive letter first.

[philmein]

wrtease, on 04 October 2011 - 08:56 PM, said:

just leave it conected to pc and run the clockwork stuff i did this earlier and worked fine okay ,ps dont forget to eject the drive letter first.

no drive is showing on the pc i can only get into ftm mode  it just bootloops androd logo

Edited by philmein, 04 October 2011 - 09:06 PM.

[wrtease]

take the battery out then put it back in then hold volume down and power till you get ftm make shure you plug in to pc after you do this it will then show up then eject drive then clockwork .okay

[tillaz]

wrtease, on 04 October 2011 - 08:56 PM, said:

just leave it conected to pc and run the clockwork stuff i did this earlier and worked fine okay ,ps dont forget to eject the drive letter first.

if the above will not work try going back a page or two and run the method colonel used to dump his rom, from there you should be able to flash a rom  

Edited by tillaz, 04 October 2011 - 09:10 PM.

[philmein]

i only seem to be able to get dfu mode when in ftm and no drive shows ill try a reboot of pc

[wrtease]

i have used this method 4 times and worked fine  2 times testing tom s cwm and 2 times for tilal so hope it does the trick .i did also try rooting as you say not to and got ftm mode so 5th time managed to get clockwork back on 100 % so far.

[philmein]

tillaz, on 04 October 2011 - 09:09 PM, said:

if the above will not work try going back a page or two and run the method colonel used to dump his rom, from there you should be able to flash a rom  

what post number is it

[wrtease]

it has always worked for me on windows 7 .maybe different on others.

[philmein]

using windows 7 did you get DFU mode port 21

[philmein]

i have this in devices it will not let me eject ZTE Handset Diagnostic Interface(DFU) (COM21)

[wrtease]

no i did not.can you tll me which rom ou installed and can you delete the handset drivers as their should be ones on the handset to install.i installed the new stock rom earlier today and then rooted it .got ftm mode so just unpluged the mobile and then set it to ftm mod then conected usb cable to it then pc then it picked up hanset drivers allowed them to install then got drive letter then ejected it then double clicked the three clockwork files and got it working again okay.

[philmein]

a stock rom zte skate 2.3.5 i think

[wrtease]

thats the one i had on earlier .and managed to get clockwork back on okay.

[tillaz]

if you have no luck you could try booting clockwork from adb (same method for rom dump )

[philmein]

tillaz, on 04 October 2011 - 09:42 PM, said:

if you have no luck you could try booting clockwork from adb (same method for rom dump )

how would i do that??

i can only get ftm mode or if i turn the phone on i get android fmv on boot but that just keeps looping i installed pauls superboot in error and have tombs clockwork installed even tho it doesn't show (goes in ftm mode instead) no drive just diagnostic mode DFU

Edited by philmein, 04 October 2011 - 10:04 PM.

[wrtease]

if youve got the handsetdrivers loaded delete them in program and features then plug in your mobile and see what happens worth a  try.

[tillaz]

any news

[philmein]

tillaz, on 04 October 2011 - 09:42 PM, said:

if you have no luck you could try booting clockwork from adb (same method for rom dump )

how do i do this?