761 replies to this topic

[Torstiko]

Hi
I'm using dmd with the low voltage kernel. How do i know wich settings to make in the new kernel?
Are there presets?

Thanks
Torstiko

[TechnoLover]

No, there aren't any presets, I don't know the voltages from dmd, but you can have a view on my voltages on the first post, you see them on the screenshot. They are very low, so keep them a bit higher and try to lower them each for a bit

[Torstiko]

Thanks Technolover,

If i flash your kernel, are there still the current settings or the stock ones?

Greets
Torstiko

[TechnoLover]

stock voltage

[spal]

After I saved my settings and do a reboot, at the first start, the program still shows the reference --stock-- voltages. Is it's just the app's starting value or it does a reading at start and the save was unsuccessful?

[TechnoLover]

please tell me your rom and I'll have a look
yes it means it was unsuccessful in loading or saving them :/

Edited by TechnoLover, 07 November 2011 - 10:43 PM.

[edisson77]

TechnoLover, on 07 November 2011 - 10:42 PM, said:

please tell me your rom and I'll have a look
yes it means it was unsuccessful in loading or saving them :/

I have  same problem. After rebooting, MT Voltage Control shows stock value.
Official ROM 4.000.13 GEN1 with RecoveryMT 2.2, Root, your last kernel.

[wmj1983]

qiang lie zhi chi xia

[mjpgly]

i really like this kernel,so I flash new kernel on Gingerounay3.0,but apps2sd still can't work ,no /sd-ext
and some tweak lost,like /sys/devices/virtual/bdi/179:0/read_ahead_kb,Gingerounay3 is echo 1040

Edited by mjpgly, 08 November 2011 - 03:39 AM.

[stonebear]

mjpgly, on 08 November 2011 - 03:34 AM, said:

I flash this new kernel on Gingerounay3.0,apps2sd still have problem,no /sd-ext

I don't think the kernel would affect that? Not that I know anything about this stuff.

Edited by stonebear, 08 November 2011 - 04:30 AM.

[stonebear]

@Techno, my settings were saved after rebooting. I am using stock 2.3.6.

.

Edited by stonebear, 08 November 2011 - 04:54 AM.

[Torstiko]

stonebear, on 08 November 2011 - 04:53 AM, said:

@Techno, my settings were saved after rebooting. I am using stock 2.3.6.

No Problem for me too, on Ginger_dmd.

Just testing voltages. Now 25 mV above your values and stable.

Thanks

[baiteay]

I used ROM 4.000.01_AAP_GEN2 / Ver 2.3.5
TechnoLovers's Kernel Edition 1.1 support this or not

[TechnoLover]

for the ones where set at boot doesn't work, do this: run this code in terminal Emulator

su
busybox

and tell me the output Then install busybox from market with busybox installer
I think there's the problem

Edited by TechnoLover, 08 November 2011 - 06:14 AM.

[edisson77]

TechnoLover, on 08 November 2011 - 06:13 AM, said:

for the ones where set at boot doesn't work, do this: run this code in terminal Emulator

su
busybox

and tell me the output Then install busybox from market with busybox installer
I think there's the problem

After command - not found.
But...after installing busybox...
Thank you very much! Very useful advice. Voltage setting is now saved.

Edited by edisson77, 08 November 2011 - 07:46 AM.

[spal]

TechnoLover, on 08 November 2011 - 06:13 AM, said:

for the ones where set at boot doesn't work, do this: run this code in terminal Emulator

su
busybox

and tell me the output Then install busybox from market with busybox installer
I think there's the problem

Sorry, I totally forgot that I'm using a stock ROM now, on my Liquid E I always on a custom one...bad habit  Thanks for your fast thinking!

Edited by spal, 08 November 2011 - 10:41 AM.

[mister_sleeper]

I am using GingerOunay 3.0.1 with TechLover's Kernel, but the voltages in the first post are too low.
I'm trying to find the perfect voltage for each frequence, but even if the voltage appear stable, if I save it for the boot an then I reboot, the phone freezes at the acer screen .
so, is it possible that during the boot the cpu needs more voltage then during normal use ?

Edited by mister_sleeper, 08 November 2011 - 08:47 AM.

[stonebear]

mister_sleeper, on 08 November 2011 - 08:34 AM, said:

I am using GingerOunay 3.0.1 with TechLover's Kernel, but the voltages in the first post are too low.
I'm trying to find the perfect voltage for each frequence, but even if the voltage appear stable, if I save it for the boot an then I reboot, the phone freezes at the acer screen .
so, is it possible that during the boot the cpu needs more voltage then during normal use ?

Maybe, but I can set voltages and it seems fine, it will perform benchmarks ok but then suddenly it will freeze when doing a little thing, so I have to accept it needs more volts. I can't get close to the settings on the first page without problems but I can reduce quite a lot from stock.

[harylauw]

thank you gonna try this

[mister_sleeper]

stonebear, on 08 November 2011 - 09:15 AM, said:

Maybe, but I can set voltages and it seems fine, it will perform benchmarks ok but then suddenly it will freeze when doing a little thing, so I have to accept it needs more volts. I can't get close to the settings on the first page without problems but I can reduce quite a lot from stock.

so can you post your stable voltages?
today I'm using those ones and seems stable:

368 MHz @ 875 mV
806 MHz @ 925 mV

can you do better?