Jump to content


Photo

Inverted Touchscreen

- - - - -

  • Please log in to reply
4 replies to this topic

#1
agor

agor

    Newbie

  • Members
  • Pip
  • 11 posts
Hello guys,

I noticed a weird bug I am having with my phone.


Its the GSM variant.

I am/was currently using the rom in the signature, MoDaCo Ir6/preIr7
I wanted to try out the new KANG's, so went into CWM, wiped everything, installed.
Following bug: The touchscreen is mirrored/flipped vertically, that means if I want to press the "Next" button in the Android Installation wizard in the bottom right corner, I have to touch into "nothing" in the top right.
Thinking this was due to rom, I flashed bigxie's Stock Rooted Rom. Same there.
Restoring my MoDaCo ROM would repair everything again.

Then I went to try googles STOCK images here: http://code.google.c...ages.html#yakju

I flashed 4.0.2 (ICL53F) using fastboot.
And with the STOCK Image, I had the very same problem.

Flashing back to stock 4.0.1 (ITL41F): everything fine again.

Just did:
Hard reset
Flashed Stock ITL41F via fastboot
Rebootet several times, no update still
Flashed Stock ICL53F via fastboot
And made a pictureof the problem happening again:
Posted Image
Any ideas?


Please help me :(

  • 0

#2
agor

agor

    Newbie

  • Members
  • Pip
  • 11 posts
If I use USB OTG the mouse moves correctly, no inverted Y axis there.

logcat events which mention touchscreen:

I/EventHub(  194): New device: id=6, fd=140, path='/dev/input/event1', name='Melfas MMSxxx Touchscreen', classes=0x14, configuration='/system/usr/idc/Melfas_MMSxxx_Touchscreen.idc', keyLayout='', keyCharacterMap='', builtinKeyboard=false
I/InputReader(  194):   Touch device 'Melfas MMSxxx Touchscreen' could not query the properties of its associated display 0.  The device will be inoperable until the display size becomes available.
I/InputReader(  194): Device added: id=6, name='Melfas MMSxxx Touchscreen', sources=0x00001002
[...]

I/InputReader(  194): Device reconfigured: id=6, name='Melfas MMSxxx Touchscreen', surface size is now 720x1280, mode is 1
[...]

I/Pointer (  194): Input Device 0: tuna-gpio-keypad
I/Pointer (  194):   Keyboard Type: non-alphabetic
I/Pointer (  194):   Sources: 0x101 ( keyboard )
I/Pointer (  194): Input Device 5: Tuna Headset Jack
I/Pointer (  194):   Keyboard Type: none
I/Pointer (  194):   Sources: 0x80000000 ( )
I/Pointer (  194): Input Device 6: Melfas MMSxxx Touchscreen
I/Pointer (  194):   Keyboard Type: none
I/Pointer (  194):   Sources: 0x1002 ( touchscreen )
I/Pointer (  194): 	AXIS_X: source=0x1002 min=0.0 max=719.0014 flat=0.0 fuzz=0.99861306
I/Pointer (  194): 	AXIS_Y: source=0x1002 min=0.0 max=1279.0007 flat=0.0 fuzz=0.99921936
I/Pointer (  194): 	AXIS_PRESSURE: source=0x1002 min=0.0 max=1.0 flat=0.0 fuzz=0.0
I/Pointer (  194): 	AXIS_SIZE: source=0x1002 min=0.0 max=1.0 flat=0.0 fuzz=0.0
I/Pointer (  194): 	AXIS_TOUCH_MAJOR: source=0x1002 min=0.0 max=1468.6047 flat=0.0 fuzz=0.0
I/Pointer (  194): 	AXIS_TOUCH_MINOR: source=0x1002 min=0.0 max=1468.6047 flat=0.0 fuzz=0.0
I/Pointer (  194): 	AXIS_TOOL_MAJOR: source=0x1002 min=0.0 max=1468.6047 flat=0.0 fuzz=0.0
I/Pointer (  194): 	AXIS_TOOL_MINOR: source=0x1002 min=0.0 max=1468.6047 flat=0.0 fuzz=0.0

If you have ANY idea whom I could write (I already twittered Paul, no answer though :(
I also asked Jean-Baptiste Queru, but he answered: "@agormog Nope, no idea, sorry, I have very little visibility over what those retail builds."

Shall I try to RMA?
Please If you have ANY idea try to help me, I am really desperate


Edit:
uid=0 gid=0@android:/ # cat /system/usr/idc/Melfas_MMSxxx_Touchscreen.idc
# Copyright (C) 2011 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#
# Input Device Calibration File for the Tuna touch screen.
#

# Basic Parameters
touch.deviceType = touchScreen
touch.orientationAware = 1

# Size
touch.size.calibration = diameter
touch.size.scale = 10
touch.size.bias = 0
touch.size.isSummed = 0

# Pressure
# Driver reports signal strength as pressure.
#
# A normal thumb touch typically registers about 200 signal strength
# units although we don't expect these values to be accurate.
touch.pressure.calibration = amplitude
touch.pressure.scale = 0.005

# Orientation
touch.orientation.calibration = none

Edited by agor, 22 December 2011 - 08:49 PM.

  • 0

#3
djmcnz

djmcnz

    Diehard

  • Members
  • PipPipPipPip
  • 386 posts
  • Gender:Male
  • Location:Amsterdam
  • Devices:Galaxy Nexus, TF201
My config file is identical to yours.

I suggest re-flashing the stock image that works and then getting the OTA update to 4.0.3 to see what happens. If that's broken then get a replacement handset.

  • 0

#4
agor

agor

    Newbie

  • Members
  • Pip
  • 11 posts
So, I just came back from exchanging my device at the store.
To exclude user errors, which would be the safest way to get to the newest MoDaCo Kitchen.

I would:
Superboot
Install ROM Manager
Flash CWM Recovery

and Update from ZIP, but this is what I did last time without success.

Greets

  • 0

#5
djmcnz

djmcnz

    Diehard

  • Members
  • PipPipPipPip
  • 386 posts
  • Gender:Male
  • Location:Amsterdam
  • Devices:Galaxy Nexus, TF201

So, I just came back from exchanging my device at the store.
To exclude user errors, which would be the safest way to get to the newest MoDaCo Kitchen.

I would:
Superboot
Install ROM Manager
Flash CWM Recovery

and Update from ZIP, but this is what I did last time without success.

Greets


Once you've installed CWM do a nandroid backup BEFORE you flash MCR so you can restore if the next step doesn't work...

Edited by djmcnz, 23 December 2011 - 03:45 PM.

  • 1




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users