102 replies to this topic

[jerrin]

Hi i just bought an Idea Cellular India branded ZTE Blade, could any one suggest which rom to try here are a couple of details i got hope it helps to make a suggestion.

Ram 256mb, Gen2, Android 2.2,

*983*24474636# machine info:



LCD Information:


TouchScreen Information:
touchscreen module
name :synaptics
i2c addresss :0x22
IC type :2000 series
firmware version :TM1541
moudule:synaptics+TPK


WIFI Information:
Device manufacturing:Atheros
Model Number:AR6002




BT Information:
BTS4025


Camera Information:
ID:0x5ca


Nmae:No sensor or error ID!


Flash Information:
Hynix 4G NAND


Also an Idea Blade owner posted Moldovan-Mile-High-Mountain-Pie-RLS9 and M-MHMP-RLS9-Swedish-Stock-Kernel-Gen2.zip worked for him. could anybody confirm this or point me in the right direction. thanks

[Nina Asil]

Hi, I got a Dell XCD 35, an Idea Blade and tried most of the roms  around. TheDell XCD 35 works perfect with cm7 and most of the roms but  in the Idea Blade the roms install and work just fine the only error  persisting and common in all is just the CANNOT CONNECT CAMERA. It is  because the new Chinese Idea Blades have a different camera driver,  which is yet to be integrated in the cm7 or different roms. I personally  haven tried the moldovian rom shall try and and post here soon. I am  desperately waiting for the camera to start working in any of these  custom roms. Pls do let me know if you have any feedback or further info  on the same. Thanks!

[jerrin]

Nina Asil, on 22 January 2012 - 10:03 AM, said:

Hi, I got a Dell XCD 35, an Idea Blade and tried most of the roms  around. TheDell XCD 35 works perfect with cm7 and most of the roms but  in the Idea Blade the roms install and work just fine the only error  persisting and common in all is just the CANNOT CONNECT CAMERA. It is  because the new Chinese Idea Blades have a different camera driver,  which is yet to be integrated in the cm7 or different roms. I personally  haven tried the moldovian rom shall try and and post here soon. I am  desperately waiting for the camera to start working in any of these  custom roms. Pls do let me know if you have any feedback or further info  on the same. Thanks!

thank you for that, could you give the steps to install a custom rom or give the link of the guide you used. i am totaly new to android thanks.

[Nina Asil]

Hi,
Just installed the Moldovan Mile-High-Mountain-Pie RLS9 (Android 2.3.5) and applied the the kernel patches. This is the link  http://android.modaco.com/topic/347215-romgen1-2-3-moldovan-mile-high-mountain-pie-rls9-android-235/page__st__1020

I installed the rom and after installing applied the kernels. After installing the 1st kernel the cam didnt work so had to install the Swedish stock kernel and it worked like a charm. No I am truly happy and enjoying the rom. Havent come across any bugs as yet. shall post if i find anything.
Optional kernels:
-M-MHMP-RLS9-Undervolt-Kernel-Gen2.zip (thanks to wbaw and burstlam, source)
http://www.mediafire...fdieke4sgtir4n9
MD5:30082A193E6483C5473D58385E83EC90
-M-MHMP-RLS9-Swedish-Stock-Kernel-Gen2.zip (latest stock kernel with wifi driver)
http://www.mediafire...ob7we5f7e9swp6b
MD5:CEC036E5DE02EB408EBE18757B81FD82
-M-MHMP-RLS9-Malaysian-Stock-Kernel-Gen2.zip (stock kernel with wifi driver)
http://www.mediafire...5sa8w7suim1hb1j
MD5:B442394AD8864EAD01F240345B99CCA9

The steps to install the custom rom are as follows:

first of all you will have to root your phone, by installing Z4root, then download and install superuser from the market, then download and install rom manager from the market. then run rom manager and flash clockwork mod recovery and while doing this please be certain that your internet on the mobile is on. Please backup your original rom to your SD card before installing any new rom so that you can restore your original rom anytime.

I am posting a link please read the detailed instructions and only then try installing it
http://www.androidta...om-kernels.html

my email id is [email protected] if you require any assistance pls email.

Thanks !

[jerrin]

Nina Asil, on 22 January 2012 - 11:24 AM, said:

Hi,
Just installed the Moldovan Mile-High-Mountain-Pie RLS9 (Android 2.3.5) and applied the the kernel patches. This is the link  http://android.modac.../page__st__1020

I installed the rom and after installing applied the kernels. After installing the 1st kernel the cam didnt work so had to install the Swedish stock kernel and it worked like a charm. No I am truly happy and enjoying the rom. Havent come across any bugs as yet. shall post if i find anything.
Optional kernels:
-M-MHMP-RLS9-Undervolt-Kernel-Gen2.zip (thanks to wbaw and burstlam, source)
http://www.mediafire...fdieke4sgtir4n9
MD5:30082A193E6483C5473D58385E83EC90
-M-MHMP-RLS9-Swedish-Stock-Kernel-Gen2.zip (latest stock kernel with wifi driver)
http://www.mediafire...ob7we5f7e9swp6b
MD5:CEC036E5DE02EB408EBE18757B81FD82
-M-MHMP-RLS9-Malaysian-Stock-Kernel-Gen2.zip (stock kernel with wifi driver)
http://www.mediafire...5sa8w7suim1hb1j
MD5:B442394AD8864EAD01F240345B99CCA9

The steps to install the custom rom are as follows:

first of all you will have to root your phone, by installing Z4root, then download and install superuser from the market, then download and install rom manager from the market. then run rom manager and flash clockwork mod recovery and while doing this please be certain that your internet on the mobile is on. Please backup your original rom to your SD card before installing any new rom so that you can restore your original rom anytime.

I am posting a link please read the detailed instructions and only then try installing it
http://www.androidta...om-kernels.html

my email id is [email protected] if you require any assistance pls email.

Thanks !

wow thats great news going to try it on my idea blade too, btw how is it? is it faster than froyo?

Edited by jerrin, 22 January 2012 - 12:36 PM.

[jerrin]

Nina Asil, on 22 January 2012 - 11:24 AM, said:

Hi,
Just installed the Moldovan Mile-High-Mountain-Pie RLS9 (Android 2.3.5) and applied the the kernel patches. This is the link  http://android.modac.../page__st__1020

I installed the rom and after installing applied the kernels. After installing the 1st kernel the cam didnt work so had to install the Swedish stock kernel and it worked like a charm. No I am truly happy and enjoying the rom. Havent come across any bugs as yet. shall post if i find anything.
Optional kernels:
-M-MHMP-RLS9-Undervolt-Kernel-Gen2.zip (thanks to wbaw and burstlam, source)
http://www.mediafire...fdieke4sgtir4n9
MD5:30082A193E6483C5473D58385E83EC90
-M-MHMP-RLS9-Swedish-Stock-Kernel-Gen2.zip (latest stock kernel with wifi driver)
http://www.mediafire...ob7we5f7e9swp6b
MD5:CEC036E5DE02EB408EBE18757B81FD82
-M-MHMP-RLS9-Malaysian-Stock-Kernel-Gen2.zip (stock kernel with wifi driver)
http://www.mediafire...5sa8w7suim1hb1j
MD5:B442394AD8864EAD01F240345B99CCA9

The steps to install the custom rom are as follows:

first of all you will have to root your phone, by installing Z4root, then download and install superuser from the market, then download and install rom manager from the market. then run rom manager and flash clockwork mod recovery and while doing this please be certain that your internet on the mobile is on. Please backup your original rom to your SD card before installing any new rom so that you can restore your original rom anytime.

I am posting a link please read the detailed instructions and only then try installing it
http://www.androidta...om-kernels.html

my email id is [email protected] if you require any assistance pls email.

Thanks !

hey there i have a doubt could explain the order to install the addons and kernel. is it first rom then kernel and then addons thanks. also in the guide there is mention to wipe cache, darvik cache, which all did you do? thanks

[aneesasil]

Yes please first choose the option to factory reset then choose the cache wipe and then the dalvik cache.. i wiped all then installed the rom. You have to install the rom then go back to recovery mode and install  the add ons from zip on sd card the first kernel and then reboot ..after  that install the swedish kernel and after that reboot.  I have checked the gprs and the gps and the call recording default option too... everything seems to be working just perfect till now, hope it goes on the same way. On the earlier stock froyo rom i had only free memory of about 40Mb but in this rom i have about 90 Mb of free memory and thats why the phone is responding very well and its definitely much faster than the froyo rom.

Hope your installation goes error free. All the best ! Do keep me updated.

Thanks!

[jerrin]

aneesasil, on 22 January 2012 - 04:02 PM, said:

Yes please first choose the option to factory reset then choose the cache wipe and then the dalvik cache.. i wiped all then installed the rom. You have to install the rom then go back to recovery mode and install  the add ons from zip on sd card the first kernel and then reboot ..after  that install the swedish kernel and after that reboot.  I have checked the gprs and the gps and the call recording default option too... everything seems to be working just perfect till now, hope it goes on the same way. On the earlier stock froyo rom i had only free memory of about 40Mb but in this rom i have about 90 Mb of free memory and thats why the phone is responding very well and its definitely much faster than the froyo rom.

Hope your installation goes error free. All the best ! Do keep me updated.

Thanks!

thank you for the reply nice to know that rom is faster than stock froyo. will try soon, downloading files on edge connection will update as soon i install.

[ibomcha]

Nina Asil, on 22 January 2012 - 10:03 AM, said:

Hi, I got a Dell XCD 35, an Idea Blade and tried most of the roms  around. TheDell XCD 35 works perfect with cm7 and most of the roms but  in the Idea Blade the roms install and work just fine the only error  persisting and common in all is just the CANNOT CONNECT CAMERA. It is  because the new Chinese Idea Blades have a different camera driver,  which is yet to be integrated in the cm7 or different roms. I personally  haven tried the moldovian rom shall try and and post here soon. I am  desperately waiting for the camera to start working in any of these  custom roms. Pls do let me know if you have any feedback or further info  on the same. Thanks!

   so u mean idea blade is chinese version..n i can't do tpt flashing to increase the ram http://android.modac...ra-via-windows/  ..give some light buddy.

[ibomcha]

Nina Asil, on 22 January 2012 - 11:24 AM, said:

Hi,
Just installed the Moldovan Mile-High-Mountain-Pie RLS9 (Android 2.3.5) and applied the the kernel patches. This is the link  http://android.modac.../page__st__1020

I installed the rom and after installing applied the kernels. After installing the 1st kernel the cam didnt work so had to install the Swedish stock kernel and it worked like a charm. No I am truly happy and enjoying the rom. Havent come across any bugs as yet. shall post if i find anything.
Optional kernels:
-M-MHMP-RLS9-Undervolt-Kernel-Gen2.zip (thanks to wbaw and burstlam, source)
http://www.mediafire...fdieke4sgtir4n9
MD5:30082A193E6483C5473D58385E83EC90
-M-MHMP-RLS9-Swedish-Stock-Kernel-Gen2.zip (latest stock kernel with wifi driver)
http://www.mediafire...ob7we5f7e9swp6b
MD5:CEC036E5DE02EB408EBE18757B81FD82
-M-MHMP-RLS9-Malaysian-Stock-Kernel-Gen2.zip (stock kernel with wifi driver)
http://www.mediafire...5sa8w7suim1hb1j
MD5:B442394AD8864EAD01F240345B99CCA9

The steps to install the custom rom are as follows:

first of all you will have to root your phone, by installing Z4root, then download and install superuser from the market, then download and install rom manager from the market. then run rom manager and flash clockwork mod recovery and while doing this please be certain that your internet on the mobile is on. Please backup your original rom to your SD card before installing any new rom so that you can restore your original rom anytime.

I am posting a link please read the detailed instructions and only then try installing it
http://www.androidta...om-kernels.html

my email id is [email protected] if you require any assistance pls email.

Thanks !

ok i got the link for that .it was in the first page the link u gave was in middle so i was confused. http://www.mediafire...8rw8bc4j3qt8z4o is this one or u used vanilla one?and if i install the first two kernels then everything will work right. what is the use for the third kernel? is it same as the second one? can i do  tpt flashing to increase ram in my idea blade.see link  http://android.modac...ra-via-windows/
and one more help..i can't restore back to my original idea blade stock rom. when i saw from file manager in clockworkmod's backup folder, some file was missing. i think one of them is android.img comparing to the back up of cm7.1.0.
so can u help me out?

Edited by ibomcha, 22 January 2012 - 07:04 PM.

[ibomcha]

aneesasil, on 22 January 2012 - 04:02 PM, said:

Yes please first choose the option to factory reset then choose the cache wipe and then the dalvik cache.. i wiped all then installed the rom. You have to install the rom then go back to recovery mode and install  the add ons from zip on sd card the first kernel and then reboot ..after  that install the swedish kernel and after that reboot.  I have checked the gprs and the gps and the call recording default option too... everything seems to be working just perfect till now, hope it goes on the same way. On the earlier stock froyo rom i had only free memory of about 40Mb but in this rom i have about 90 Mb of free memory and thats why the phone is responding very well and its definitely much faster than the froyo rom.

Hope your installation goes error free. All the best ! Do keep me updated.

Thanks!

how do you optimised it? i installed as u mentioned. runs smoother than cyanogenmod but ram is around -30mb still so help me coz want that 80 mb. max clock speed option in ''no-frils CPU Control'' app is 600mhz so no option for overclocking..any solution ?

[aneesasil]

Yes thats the one i installed. I havent installed the 3rd kernel as i didnt feel the need to. Everything started working after installing the swedish kernel so i guess the 3rd kernel wasnt required for the Idea Blade.

Did you backup the rom properly.. i mean did it take about 10 minutes or so for you to complete backup ? You should be having a backup up file with a date on it and time on it. if ever you require to claim warranty you will first have to install the custom rom. If you ever need the idea stock rom with the idea booting logo i can share my backup rom, at least it shall serve your purpose. As far as the ram unlocking is concerned, TPT most probably will not be able to unlock the ram from 256 to 512  because these chinese idea blades seem to have a hardware ram of only 256.
hope things go smooth now.

Regrads:

Anees.

[baalu]

aneesasil, on 23 January 2012 - 02:57 AM, said:

Yes thats the one i installed. I havent installed the 3rd kernel as i didnt feel the need to. Everything started working after installing the swedish kernel so i guess the 3rd kernel wasnt required for the Idea Blade.

Did you backup the rom properly.. i mean did it take about 10 minutes or so for you to complete backup ? You should be having a backup up file with a date on it and time on it. if ever you require to claim warranty you will first have to install the custom rom. If you ever need the idea stock rom with the idea booting logo i can share my backup rom, at least it shall serve your purpose. As far as the ram unlocking is concerned, TPT most probably will not be able to unlock the ram from 256 to 512  because these chinese idea blades seem to have a hardware ram of only 256.
hope things go smooth now.

Regrads:

Anees.

hi

i also bought idea blade....have optimus one also....


but the letdown is...this blade has got 256 ram...

i want to how you clockwordmod ur device..i tried with rommanager...it downloads the new 5.0.2 clockwork

but gets stuck at green android screen..can u give me a solution as u did on ur idea blade

[jerrin]

baalu, on 23 January 2012 - 09:27 AM, said:

hi

i also bought idea blade....have optimus one also....


but the letdown is...this blade has got 256 ram...

i want to how you clockwordmod ur device..i tried with rommanager...it downloads the new 5.0.2 clockwork

but gets stuck at green android screen..can u give me a solution as u did on ur idea blade

Hi i have got clockworkmod recovery installed and backed up my stock Rom. Which step do you get it stuck thanks is it at while rebooting into recovery

[tithackrishabh]

baalu, on 23 January 2012 - 09:27 AM, said:

hi

i also bought idea blade....have optimus one also....


but the letdown is...this blade has got 256 ram...

i want to how you clockwordmod ur device..i tried with rommanager...it downloads the new 5.0.2 clockwork

but gets stuck at green android screen..can u give me a solution as u did on ur idea blade

hey try follwing key combination at start up home+volume up+power u will go into android recovery

[ibomcha]

aneesasil, on 23 January 2012 - 02:57 AM, said:

Yes thats the one i installed. I havent installed the 3rd kernel as i didnt feel the need to. Everything started working after installing the swedish kernel so i guess the 3rd kernel wasnt required for the Idea Blade.

Did you backup the rom properly.. i mean did it take about 10 minutes or so for you to complete backup ? You should be having a backup up file with a date on it and time on it. if ever you require to claim warranty you will first have to install the custom rom. If you ever need the idea stock rom with the idea booting logo i can share my backup rom, at least it shall serve your purpose. As far as the ram unlocking is concerned, TPT most probably will not be able to unlock the ram from 256 to 512  because these chinese idea blades seem to have a hardware ram of only 256.
hope things go smooth now.

Regrads:

Anees.

yes i did the back up properly. i have two back ups on diff dates. only the stock rom is not working.i guess i screwed up while i was on cyanogenmod. i will very thnkfull if u provide your backed up stock rom.plz upload n let me know where to get it :-) my email is [email protected]
so sad to hear that we have only 256mb ram but hey thanks to u for providing info about this ROM. now phone is running very smoothly.

[uumeshh]

Nina Asil, on 22 January 2012 - 11:24 AM, said:

Hi,
Just installed the Moldovan Mile-High-Mountain-Pie RLS9 (Android 2.3.5) and applied the the kernel patches. This is the link  http://android.modac.../page__st__1020

I installed the rom and after installing applied the kernels. After installing the 1st kernel the cam didnt work so had to install the Swedish stock kernel and it worked like a charm. No I am truly happy and enjoying the rom. Havent come across any bugs as yet. shall post if i find anything.
Optional kernels:
-M-MHMP-RLS9-Undervolt-Kernel-Gen2.zip (thanks to wbaw and burstlam, source)
http://www.mediafire...fdieke4sgtir4n9
MD5:30082A193E6483C5473D58385E83EC90
-M-MHMP-RLS9-Swedish-Stock-Kernel-Gen2.zip (latest stock kernel with wifi driver)
http://www.mediafire...ob7we5f7e9swp6b
MD5:CEC036E5DE02EB408EBE18757B81FD82
-M-MHMP-RLS9-Malaysian-Stock-Kernel-Gen2.zip (stock kernel with wifi driver)
http://www.mediafire...5sa8w7suim1hb1j
MD5:B442394AD8864EAD01F240345B99CCA9

The steps to install the custom rom are as follows:

first of all you will have to root your phone, by installing Z4root, then download and install superuser from the market, then download and install rom manager from the market. then run rom manager and flash clockwork mod recovery and while doing this please be certain that your internet on the mobile is on. Please backup your original rom to your SD card before installing any new rom so that you can restore your original rom anytime.

I am posting a link please read the detailed instructions and only then try installing it
http://www.androidta...om-kernels.html

my email id is [email protected] if you require any assistance pls email.

Thanks !

Hello ,

Thank you for the detailed procedure you gave for the installation of the ROM. But i have a problem,
After installation of Moldovan Mile-High-Mountain-Pie RLS9, the phone ran very well, but after the reboot,
The touch screen has become un responsive. I tried a clean install after wipe but still no luck.

Luckily i had taken a nandroid of the stock rom (froyo).  I have tried the patch
http://android.modac...m/page__st__140

but still no joy.

Can you please help.

Thank you

[jerrin]

uumeshh, on 25 January 2012 - 06:40 AM, said:

Hello ,

Thank you for the detailed procedure you gave for the installation of the ROM. But i have a problem,
After installation of Moldovan Mile-High-Mountain-Pie RLS9, the phone ran very well, but after the reboot,
The touch screen has become un responsive. I tried a clean install after wipe but still no luck.

Luckily i had taken a nandroid of the stock rom (froyo).  I have tried the patch
http://android.modac...m/page__st__140

but still no joy.

Can you please help.

Thank you

you need to install the swedish stock kernel after installing the rom if you have idea blade. Also try posting to the official rom thread http://android.modac.../page__st__1040

[baalu]

jerrin, on 23 January 2012 - 10:24 AM, said:

Hi i have got clockworkmod recovery installed and backed up my stock Rom. Which step do you get it stuck thanks is it at while rebooting into recovery

Thx dude....

i sucesfly instld clockwrkmod...


i forgt 2 upday su binary....

i did it...en evrthng was smoth...

tried sevrl roms...moldovan mile....elite blade...elitemorvelll...

but hppy with cynognmod though the cam is not connectd....

bcz with cynognmod i found no kernl problms...smooth and fast...xcept the cmra..

thx fr the reply...

[jerrin]

baalu, on 25 January 2012 - 08:37 AM, said:

Thx dude....

i sucesfly instld clockwrkmod...


i forgt 2 upday su binary....

i did it...en evrthng was smoth...

tried sevrl roms...moldovan mile....elite blade...elitemorvelll...

but hppy with cynognmod though the cam is not connectd....

bcz with cynognmod i found no kernl problms...smooth and fast...xcept the cmra..

thx fr the reply...

Nice to hear everything is working for you, there was also report of touchdown not working on cyanogenmod so don't forget to calibrate sensor.
Between could you post about the roms you tried it will be helpful thanks.