7 replies to this topic

[sos987]

That s*** is mine.
Thanks to sebastian404, quietstorm1785, hroark13.
Download here: http://narod.ru/disk...covery.img.html
Configs here: https://github.com/s...7/device-v9plus
Please test and send bug reports...

Edited by sos987, 02 February 2012 - 08:01 PM.

[tictoc]

sos987, on 02 February 2012 - 08:00 PM, said:

That s*** is mine.
Thanks to sebastian404, quietstorm1785, hroark13.
Download here: http://narod.ru/disk...covery.img.html
Configs here: https://github.com/s...7/device-v9plus
Please test and send bug reports...

Thanks sos987! Now with stable cwm without restart we can move on to testing custom roms (if/when there is any) without worry about brick.

I am not a coder, but if you don't mind me asking, what is it in your cwm that makes it NOT restart every 2.5 minutes?

[sos987]

tictoc, on 04 February 2012 - 09:09 PM, said:

Thanks sos987! Now with stable cwm without restart we can move on to testing custom roms (if/when there is any) without worry about brick.

I am not a coder, but if you don't mind me asking, what is it in your cwm that makes it NOT restart every 2.5 minutes?

rmt_storage service done right=)

[youmax]

not work with ZTE V9C rom 2.3.5, no recovery menu

[ippoP]

@sos987
My unit reports to be a TT102. Is it the one you're talking about? TIA!

[hourglass]

Hello,

I just purchased a ZTE V9A (Light Tab 2) in the UK.
It runs: android 2.3.5, baseband version V9PLUSB02, Kernel 2.6.35.7-perf+ zte-kernel@Zdroid-SMT; Build number BP_V9PLUSV1.0.0B02


(attention newbie)

Do you think this recovery can be used with this device in order to root it?
I am confused as there seems to be multiple software versions under the V9+ name.

Thanks for any answer and advice.

[hourglass]

Ok. It works.For other newbies that would be lost like me:
At first, I could not get the bootloader mode to work with my PC by holding power and volume down.

But it worked doing:

adb reboot bootloader

Then:
fastboot boot <file provided at beginning of thread>
and install zip from sdcard using Superuser-3.1.3-arm-signed.zip available on the clockworkmod website.
(I did a backup before just in case).

Superuser is installed and seems to work fine.
I did not flash clockworkmod.

Thanks

[traplo86]

Hello guys!
I am in possession of a ZTE V9 PLUS_ONDA TT102.
After you have root, I installed the CWM 4.0.1.5, SEEMS TO WORK but it gives me error  e: can not open / dev/block/mmcblk0p16
and nothing works .... backups, custom rom (Installation update ... installation aborted.)
I have try CWM 5 but (Installation update ... installation aborted.)
who could help me?
thank you very much