Guest Pinguy Posted March 23, 2012 Report Share Posted March 23, 2012 (edited) Title says it all. Installing the updated drivers does slightly improve 3D gaming, but after awhile of gaming you may find the phone becomes unstable and pretty hot (Playing Dead Space for an example). In Basemark ES 2.0 Taiji on the default drivers I was getting around 19fps But with them installed it was closer to 23 I have attached the updated drivers and the default ones if you want to go back to the originals. #EDIT The first ones I uploaded didn't seem to be packaged properly. It seems like I copied the default drivers to both packages :blink: Sorry about that. These new ones are fine. I have installed them and tested them fully. I ran Basemark ES 2.0 Taiji 3 times straight after flashing them. With New Drive. 21.69 21.86 22.15 then flashing the default drivers and doing the same with the same setup. With Default Driver. 18.38 18.33 18.21new-egl_CWM.zip.zipdefault-egl_CWM.zip.zip Edited March 23, 2012 by Pinguy Link to comment Share on other sites More sharing options...
Guest dads Posted March 23, 2012 Report Share Posted March 23, 2012 (edited) I tried, no change,i use stock rom Edited March 23, 2012 by dads Link to comment Share on other sites More sharing options...
Guest Pinguy Posted March 23, 2012 Report Share Posted March 23, 2012 (edited) I tried, no change,i use stock rom What benchmark did you use? I did notice that gaming was smoother and I was getting more FPS in Basemark ES 2.0 Taiji but using Quadrant & AnTuTu I saw no difference in the score. The drivers only improve 3D gaming so you will only see an improvement in that. I haven't tested NenaMark yet but you should see an improvement in that also. #EDIT set to 1.2GHz Default drivers same setup. I tested each benchmark 5 times to get an idea of the score. The new drivers seem to do about 3 to 5 FPS more then the default drives on average (but they are constant. The default drivers are all over the place. One second you get a good score, the second time its poor). There is an improvement with FPS with the updated drivers but not by much. The main thing with the updated drivers is how smooth games run. Before the graphic did get jumpy when there was a lot going on, but with the updated ones this doesn't happen. If you are not into 3D gaming you will see no benefits from theses updated drivers. Edited March 23, 2012 by Pinguy Link to comment Share on other sites More sharing options...
Guest dads Posted March 23, 2012 Report Share Posted March 23, 2012 I used neocorp 51.2 fps and antutu 3148, 1300 quadrant with cpu/gpu 1ghz/245mhz slight improvement 3d with fifa 12 Link to comment Share on other sites More sharing options...
Guest dads Posted March 23, 2012 Report Share Posted March 23, 2012 (edited) I used neocorp 51.2 fps and antutu 3148, 1300 quadrant with cpu/gpu 1ghz/245mhz slight improvement 3d with fifa 12 What benchmark did you use? I did notice that gaming was smoother and I was getting more FPS in Basemark ES 2.0 Taiji but using Quadrant & AnTuTu I saw no difference in the score. The drivers only improve 3D gaming so you will only see an improvement in that. I haven't tested NenaMark yet but you should see an improvement in that also. #EDIT set to 1.2GHz Default drivers same setup. I tested each benchmark 5 times to get an idea of the score. The new drivers seem to do about 3 to 5 FPS more then the default drives on average (but they are constant. The default drivers are all over the place. One second you get a good score, the second time its poor). There is an improvement with FPS with the updated drivers but not by much. The main thing with the updated drivers is how smooth games run. Before the graphic did get jumpy when there was a lot going on, but with the updated ones this doesn't happen. If you are not into 3D gaming you will see no benefits from theses updated drivers. Edited March 23, 2012 by dads Link to comment Share on other sites More sharing options...
Guest Pinguy Posted March 23, 2012 Report Share Posted March 23, 2012 Edited main post. Link to comment Share on other sites More sharing options...
Guest matty90 Posted March 24, 2012 Report Share Posted March 24, 2012 (edited) I have flashed the phone but not most.and default driver malfunction Edited March 24, 2012 by matty90 Link to comment Share on other sites More sharing options...
Guest SLBoy Posted March 24, 2012 Report Share Posted March 24, 2012 (edited) It seems to improve performance a little, cpu 1200 mhz + gpu 297mhz had 18 on basemark and 25 on nenamark 2, now got 19 (lol) on basemark and 30 on nenamark 2. Edited March 24, 2012 by SLBoy Link to comment Share on other sites More sharing options...
Guest harylauw Posted March 25, 2012 Report Share Posted March 25, 2012 Can this update used on cm? Link to comment Share on other sites More sharing options...
Guest fladna9 Posted March 26, 2012 Report Share Posted March 26, 2012 Tried this on CM7 by Lens-Flare with a clean install and it did not worked. Damn. Link to comment Share on other sites More sharing options...
Guest davidevinavil Posted March 26, 2012 Report Share Posted March 26, 2012 Tried this on CM7 by Lens-Flare with a clean install and it did not worked. Damn. You need also proper Libgsl.so to get it working.. Link to comment Share on other sites More sharing options...
Guest dads Posted March 26, 2012 Report Share Posted March 26, 2012 how to install Libgsl.so ? You need also proper Libgsl.so to get it working.. Link to comment Share on other sites More sharing options...
Guest davidevinavil Posted March 26, 2012 Report Share Posted March 26, 2012 Just place in system/lib but you need right one. Ask at post author where he found libs Link to comment Share on other sites More sharing options...
Guest dads Posted March 26, 2012 Report Share Posted March 26, 2012 ah thank you I will find ;) Link to comment Share on other sites More sharing options...
Guest stoorzsto Posted March 27, 2012 Report Share Posted March 27, 2012 (edited) I've tried galaxy w's libgsl and replace it. It can boot,but very very lag..... How can I find proper libgsl? Edited March 27, 2012 by stoorzsto Link to comment Share on other sites More sharing options...
Guest Genrix Posted March 28, 2012 Report Share Posted March 28, 2012 Pinguy, where you find a new drivers? Link to comment Share on other sites More sharing options...
Guest stoorzsto Posted March 28, 2012 Report Share Posted March 28, 2012 Pinguy, where you find a new drivers? I know,it's from Galaxy W. Link to comment Share on other sites More sharing options...
Guest Genrix Posted April 2, 2012 Report Share Posted April 2, 2012 I watched the archive with new drivers adreno 205, for the IСS. I noticed that Qualcomm give not only the files from "/system/lib/egl", but also files from the "/system/lib/" folder. Maybe we should examine the files and drivers from Samsung W and may need something else to upgrade and get even better results? :unsure: Link to comment Share on other sites More sharing options...
Guest Vazel360 Posted May 6, 2012 Report Share Posted May 6, 2012 when i install this package in reocvery with the miui the phone goes remain in splash screen (acer technolover) how to resolve? Link to comment Share on other sites More sharing options...
Guest stoorzsto Posted May 6, 2012 Report Share Posted May 6, 2012 This is not for CM7/MIUI. You can copy same file from MIUI flashable zip and replace it into new-driver zip. You should recover after flash replaced zip. Link to comment Share on other sites More sharing options...
Guest Vazel360 Posted May 6, 2012 Report Share Posted May 6, 2012 i have risolved i can updated the driver of gpu adreno 205? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now